Аналіз робочого простору верстата з паралельною кінематикою при обробці деталей під кутом

Loading...
Thumbnail Image

Date

2013

Authors

Павленко, І. І.
Вахніченко, Д. В.
Pavlenko, I.
Vakhnichenko, D.

Journal Title

Journal ISSN

Volume Title

Publisher

КНТУ

Abstract

В статті проаналізовано робочий простір верстатів з паралельною кінематикою при обробці під кутом за умови ведення обробки з різних боків деталі. Графічно було визначено, як впливає кут нахилу виконавчого органу на форму слідуючих функціональних зон, а саме: ехнологічну; резервну технологічну; інструменту; установчих рухів; конструктивну, обслуговування, недосяжну, нереалізовану. When designing mechanisms with parallel kinematics is important to determine the condition of the effective functioning of the machine, ie, the exercise of the necessary movements that are performed within the movement and orientation of the executive body. It is proposed to assess the functioning of machines by mechanisms with parallel kinematics (MPK), based on the conditions of movements at an angle such that the need for treatment holes at an angle where the mobile platform provides an appropriate traffic flow. For the effective implementation of the set operations must be informed determine design parameters machines by MPK. This machine operation is possible in the presence of geometric space, which is a working space (function space) machines by MPK limited basis, fixed top plate and side walls. This paper analyzes the workspace tools with parallel kinematics in the processing angle for conditions of handling parts from different angles. Graphically, it was determined the effect of the angle of the executive body of the form by following functional areas, namely technology, backup technology, tools, founding movements, structural, maintenance, unattainable, unrealized. The study presented in this paper show that the tilting platform to set the angle at the point of processing the service area of the MPK deviates from the axis of symmetry of the machines by MPK in the direction opposite to tilt the tool.

Description

Keywords

верстат, гексапод, МПК, ВПК, верстат з паралельною кінематикою, machine, hexapod, MPK, PKM, machine with parallel kinematics

Citation

Павленко, І. І. Аналіз робочого простору верстата з паралельною кінематикою при обробці деталей під кутом / І. І. Павленко, Д. В. Вахніченко // Збірник наукових праць Кіровоградського національного технічного університету. Техніка в сільськогосподарському виробництві, галузеве машинобудування, автоматизація. - Кіровоград: КНТУ, 2013. - Вип. 26. - С. 48-53.