Конструювання, виробництво та експлуатація сільськогосподарських машин. Випуск 43. Ч. 2 - 2013

Permanent URI for this collection

Browse

Recent Submissions

Now showing 1 - 20 of 50
  • Item
    Моделювання процесу заморожування гарбузових овочів
    (КНТУ, 2013) Ялпачик, В. Ф.; Кюрчев, С. В.; Тарасенко, В. Г.; Yalpachik, Vladimir; Kyurchev, Sergey; Tarasenko, Vera
    Робота присвячена розробці математичної моделі процесу заморожування гарбузових овочів та її апробації по змінних в часі температурних полів, тривалості процесу і тепловим потокам шляхом порівняння розрахункових та експериментальних даних з метою контролю процесів в промислових умовах і подальшого вирішення задач енерго- та ресурсозбереження на агропромислових підприємствах.The work is devoted to developing a mathematical model of the process of freezing pumpkin vegetables and its approval by variable temperature fields over time, and duration of the heat flux by comparing the calculated and experimental data for process control in an industrial environment and further solve the problems of energy efficiency in the agro-industrial enterprises. Nonlinear interpolation formulated a mathematical model for the process of cooling and freezing pumpkin vegetables can expect changes in temperature fields and heat fluxes from the surface facilities refrigeration processing time. On the basis of testing of the formulated mathematical model obtained satisfactory results of testing.
  • Item
    Дослідження закономірності зміни об’ємного газовмісту за висотою забірного пристрою засобу для добування органічного сапропелю
    (КНТУ, 2013) Хомич, С. М; Khomich, S.
    У статті наведено теоретичні закономірності зміни об’ємного газовмісту за висотою забірного пристрою засобу для добування органічного сапропелю. На основі розв’язку отриманої залежності числовим методом, побудовані графічні залежності даного параметра. The theoretical regularities of change of volume of gas content by the height of intake device of tool for extracting of organic sapropel are presented in the article. Graphical dependences were built based on the obtained solution using numerical method of this parameter.
  • Item
    Построение решения уравнений динамики зерновых смесей на плоских виброрешетах
    (КНТУ, 2013) Харченко, С.О.; Kharchenko, Sergey
    В статье приведено решение уравнений динамики зерновых смесей на виброрешетах. Получены математические выражения для определения поля скоростей зерновой смеси, учитывающие конструктивно-кинематические параметры виброрешет. В статті наведено розв’язок рівнянь динаміки зернових сумішей на віброрешетах. Одержані математичні вирази для визначення поля швидкостей зернової суміші, які ураховують конструктивно-кінематичні параметри віброрешіт. To study the dynamics of the grain mixture on a vibrating sieve, obtaining mathematical expressions, taking into account structural and kinematic parameters of the sieve. The paper presents the solution of dynamics of grain mixtures vibrating sieves. The mathematical expressions for the velocity field of the grain mixture, taking into account the structural and kinematic parameters of vibrating sieves. Conclusions. Calculation formulas for velocity, taking into account the characteristics of the oscillations as a sieve (amplitude and frequency), and its design parameters - the size of the holes and the period of their recurrence.
  • Item
    Дисковий плуг для роботи в умовах садово-паркових господарств
    (КНТУ, 2013) Теслюк, Г. В.; Teslyuk, Gennady
    В статті на основі аналізу особливостей обробітку грунту в умовах садово-паркових господарств аргументована конструкція дискового робочого органа до мотоблоку. Особливість конструкції полягає в тому, що вона адаптована до роботи в грунтовому середовищі, насиченому кореневою системою та її залишками. Експериментами доведена вірність обраного технічного рішення. The purpose of article - Development of a workable tillage machines to work in the specific conditions of gardens hazyaystv. As shown by the analysis we performed landscape - park Dnepropetrovsk farms, processing subject areas, which in size are mainly in the range where manual handling is almost impossible to fulfill, and the use of standard high-performance equipment is not economically feasible. Creating a loop on the basis of two-wheel tractor implements is the most sensible decision given problem. The difficulty lies in the fact that walk-behind and hand- routed it imposes specific requirements for this trail guns. Disk plow compared to other tillage implements has a much smaller draft resistance and this makes it promising for use in a motor-block. An additional advantage is still in the fact that due to the possibility of adjusting the angle to the vertical disk staging and direction, can be adjusted within a wide range and quality of loosening conclusion clipped layer. Thus, the use of disk plow may be promising. The main changes proposed by us are to rationalize the design of the cutting edge of the disc. The essence of the improvement consists in that the blade disc shaped profiles with different cutting angles. The proposed design provides disk loosening the soil, as well as a regular disk and additionally has a high cropping ability. The latter ensures the reliable operation of the unit as a whole in oversaturated areas root system.
  • Item
    Пропускна здатність очисника вороху коренеплодів
    (КНТУ, 2013) Теслюк, В. В.; Teslyuk, V.
    Наведено розрахункові математичні моделі, які характеризують взаємозв’язок зміни секундної подачі викопаного вороху коренеплодів до еліпсних шнеків очисника, або зміни необхідної пропускної здатності очисника залежно від конструктивних параметрів лемешів вібраційних копачів і агрофізичних характеристик коренеплодів та експлуатаційних умов роботи коренезбиральної машини. Substantiated problem separation heap roots that dug working bodies korneuborochnoy machines (КM). The solution to this problem depends on the ability of separating doochistitelnyh working bodies KM Calculations mathematical models which characterize intercommunication of change of the second serve of dug up to the lots of root crops to ellipses of purifier or changes of necessary carrying capacity of purifier descriptions of root crops and operating terms of work of machine are resulted.
  • Item
    Управление процессом горения электрической дуги на нелинейных участках ее вольт-амперной характеристики с использованием массива прецедентов
    (КНТУ, 2013) Смирнова, Н. В.; Смирнов, В. В.; Смірнова, Н. В.; Смірнов, В .В.; Smirnova, Nataliya; Smirnov, Vladimir
    Приведено описание процесса формирования массива прецедентов для обучения системы управления процессом горения электрической дуги на нелинейных участках ее вольт–амперной характеристики. Наведено опис процесу формування масиву прецедентів для навчання системи управління процесом горіння електричної дуги на нелінійних ділянках її вольт-амперної характеристики. The purpose of this article is the nonlinear plots her current-voltage characteristics to solve problem of stability electric arc process burning. Solving this problem allows to increase the range of operating currents of the arc in the processing parts from increase to increase the processing speed and downward to improve surface finish. The realization the forming a precedent process for Learning Control System of the machining of parts arc using for determining the optimal arc correlation method. The results the control system modeling behavior are positive, suggesting the need for further research in the area of "smart" controllers and control systems using neural networks and genetic algorithms.
  • Item
    Інтенсифікація обробки керамічних матеріалів з додатковим хімічним впливом мастильно-охолодної рідини (МОР) з різним рН
    (КНТУ, 2013) Ситник, О. О.; Прудченко, В. В.; Sitnik, A.; Prudchenko, V.
    Наведені результати теоретичних та експериментальних досліджень хімічного впливу мастильно-охолодної рідини на процес алмазного шліфування змінних непероточуваних пластин із інструментальної кераміки. Встановлені властивості та наведені практичні рекомендації щодо використання технологічного середовища при алмазному шліфуванні керамічних матеріалів. The aim of the article is physical-chemical cooling liquid influence on the cutting process under glazier’s diamond processing of tool-making ceramics. Structures of modern lubrication-cooling liquids have been studied. Cutting conditions at mechanic processing of cutting ceramics are defined. Methods of laboratory research of technological medium influence on glazier’s diamond wear and tear diminution are presented. The research of glazier’s diamond efficiency at different tool-making materials grinding has been conducted. Efficiency estimation of lubrication-cooling liquid use at glazier’s diamond processing has been conducted. There are recommendations on the choice of synthetic lubrication-cooling liquids during cutting ceramics processing.
  • Item
    Оптимізація складу захисного покриття методом математичного планування експерименту
    (КНТУ, 2013) Сапронов, О. О.; Sapronov, Aleksandr
    Досліджено залежність вмісту дисперсних наповнювачів на адгезійні властивості епоксидних композитів для формування захисних покриттів. Встановлено, що введення у композицію наповнювачів з різною дисперсністю при оптимальному вмісті забезпечує покращення адгезійних властивостей покриттів. Методом математичного планування експерименту визначено оптимальний вміст двоокису цирконію і пічної сажі, який складає: (ZrO2) – 70 мас.ч; (ПГМ-33) – 25 мас.ч., ЕД-20 – 100 мас.ч., твердник ПЕПА – 10 мас.ч. The dependence of the content of dispersed fillers in adhesive properties of epoxy composites to form a protective coating. The introduction of filler composition with different dispersion at the optimum content provides improved adhesion properties of coatings. The method of mathematical planning of the experiment to determine the content of main and additional filler in the formation of coatings. For statistical analysis of the results of the experiment have audited the reproducibility of experiments on the criterion Cochran. Thus determined regression coefficients, the significance of which tested by Student's test. The adequacy of the obtained model tested by the Fisher criterion. Established optimal content zirconium dioxide and carbon black furnace , which is : (ZrO2) - 70 parts, (GMP-33) - 25 parts, ED-20 - 100 parts, hardener PEPA - 10 parts. adhesion, protective coatings, disperse filler, mathematical planning.
  • Item
    Визначення форми гравітаційної направляючої поверхні живильного пристрою пневмосепаратора
    (КНТУ, 2013) Нестеренко, О. В.; Кислун, О. А.; Лузан, П. Г.; Богатирьов, Д. В.; Nesterenko, Aleksandr; Kislun, Oleg; Luzan, Petro; Bogatyrev, Dmitry
    В статті проведено теоретичне обґрунтування форми гравітаційної направляючої поверхні живильного пристрою пневмосепаратора, яка забезпечує рівномірну подачу зернового матеріалу в пневмосепаруючий канал з заданою швидкістю та напрямом. В результаті теоретичного аналізу отримано функціональну залежність швидкості руху зерна по гравітаційній направляючій поверхні з урахуванням опору повітря, а також графічне зображення її форми. One of the factors that greatly influences the grain separation process is the speed of its supply and the direction. The peculiarity of the work of the studied aspirating channel with the multilevel grain supply is that its feeding device consists of several guiding surfaces, which are situated above each other. The length of the guiding surfaces increases along the path of the grain material, which is caused by the construction necessity. For the effective work of the studied aspirating channel the speed of the grain supply on all guiding surfaces of the feeding device should be equal. So, for provision of the chosen speed regime of the grain movement there is a necessity to prove the correspondent form of the guiding gravitation surface. As a result of the theoretical analysis there was received a functional dependence of the speed of the grain supply on the whole guiding surface taking into account the air resistance and graphical image of the form of the guiding surface of the air separator feeding device.
  • Item
    Дослідження складу забруднень робочої рідини гідросистем дорожньо-будівельних машин, тракторів та автомобілів
    (КНТУ, 2013) Русских, В. В.; Russkikh, Viktor
    В статті розглянуті переваги і недоліки об’ємного гідроприводу перед електричним приводом та механічними передачами, а також переваги та недоліки шестеренних насосів. Визначено, що основним видом зношення деталей шестеренного насосу є абразивне зношення. Наведено, що основна причина виходу з ладу шестеренних насосів є забруднення робочої рідини. Визначено фактичний вміст механічних домішок в робочій рідині гідросистем машин та якісна оцінка забруднень. Purpose of the article determination of actual composition of mechanical admixtures in the working liquid of gidrosistem road – build machines, tractors and cars. Advantages and lacks of by volume gidroprivoda, and also advantages and lacks of cog-wheel pumps, are considered in the article. It is set that the basic type of wear of details of cog-wheel pumps is an abrasive wear, and by principal reason of output them from a line-up is contamination of working liquid. It is set that the basic type of wear of details of cog-wheel pumps is an abrasive wear, and by principal reason of output them from a line-up is contamination of working liquid. The analysis of contaminations and signs of their education and penetration in gidrosistemy of machines is executed. Actual maintenance of mechanical admixtures is certain in the working liquid of gidrosistem. The high-quality estimation of contaminations is executed. The results of researches allow to set the ways of decline of wear of details of cog-wheel pumps, due to the decline of level of contamination of working liquid.
  • Item
    Аналіз конструкцій індивідуальних доїльних установок на відповідність забезпечення вимог виробництва молока
    (КНТУ, 2013) Рубльов, В. І.; Дев’ятко, О. С.; Rublev, V.; Deviatko, E.
    Розглянуто основні вимоги до конструкцій індивідуальних доїльних установок згідно з міжнародними стандартами. Наведено блок схему транспортування молока від дійок вимені до збірної ємності. Вказано напрямок удосконалення технічного забезпечення покращення якості молока в умовах технологій доїння особистих селянських та фермерських господарствах. Розроблена і апробована конструкція удосконаленого устрію для індивідуальних доїльних установок. Considered set of requirements for individual construction milking according to international standards to ensure milk quality at the global level, which was based on the analysis of the standard ISO 5707:2007 and ISO 6690:2007. It is possible by using a systematic approach to consider the individual components of the milking machines and create a flowchart. On the basis of which it was found that transport milk is in the system milking machine. It was therefore examined the interaction of the components of the reduced system of individual milking machines and their impact on the quality of milk. This analysis allowed to be determined with the the least protected stage in the line of transporting, and by direction of improvement of the technical providing and improvement of quality of milk in the conditions of technologies of milking the personal peasant and farmer economies. Based on patent information retrieval have been confirmed are listed priority areas of work and design. Improvements are taken to the improvement of receipt of quality of milk at his transporting in accordance with world requirements. A maintainance of the maximally close bacterial state of milk is on an output from a cattle. Designed and tested device of improved design for individual milking machines.
  • Item
    Стан і перспективи розвитку комбінованих агрегатів
    (КНТУ, 2013) Ролдугін, М. І.; Михайловський, Є. С.; Roldugin, M.; Mikhailovsky, Y.
    Розглянуто тенденції розвитку та створення машин для комбінованого обробітку грунту. Запропоновано шляхи удосконалення машин для комбінованого обробітку ґрунту. Удосконалено систему основної і передпосівної обробки, обґрунтована необхідність диференціації глибини і числа обробок у сівозміні. Зроблено аналіз на основі досліджень, що в сучасному сільському господарстві існує тенденція до поєднання кількох операцій за один прохід колісного трактора. З метою більш повного використання потужності, зниження сумарної трудомісткості виконання сільськогосподарських операцій та досягнення агрономічних переваг відзначається доцільність установки на тракторі знарядь спереду і ззаду. No country with a developed agrarian sector cannot compete successfully on the market of food and agricultural products without their own production of the basic nomenclature of modern equipment for the mechanization of agricultural production. The trends in development of machines for the combined soil processing. Ways to improve the machinery for the combined soil processing. Improve the system for the main and presowing treatment, the necessity of differentiation of depth and number of treatments in the rotation. An analysis made on the basis of research that modern agriculture, there tends to be a combination of several operations in one pass wheeled tractor. With the purpose of more full capacity utilization, the reduction of total labor intensity of agricultural operation and achieve the agronomic benefits of the expedience of installation on a tractor guns in front and. On the basis of generalization of scientific research and best practices established, that for creation of optimal soil conditions for growth and development of agricultural crops in the existing crop rotations in different soil-climatic zones of the country it is necessary to apply a differentiated treatment system depending on the soil properties, its predecessors, debris and other fields.
  • Item
    Ефективність розділення зернового матеріалу на фракції турбінним сепаратором
    (КНТУ, 2013) Петренко, Д. І.; Васильковський, О. М.; Лещенко, С. М.; Нестеренко, О. В.; Petrenko, D.; Vasilkovskiy, A.; Leshchenko, S.; Nesterenko, A.
    В статті авторами висвітлено проблему оптимізації параметрів пневматичних сепараторів для очищення і сортування зерна. Отримані аналітичні залежності дозволяють дослідити процес розділення зернової суміші на фракції і теоретично встановити необхідні параметри сепаруючої системи. Аналіз траєкторій переміщення часток суміші в вертикальному пневмоканалі кільцевого типу дозволяє зробити висновок, що в турбінному сепараторі можна ефективно виділяти із зернової суміші легкі домішки, при цьому лише незначна їх частина може потрапити в повноцінне зерно. The article considers the problem of optimizing the parameters pneumatic separators for cleaning and grading grain. To do this, theoretically studied the interaction of the cereal mixture and air flow in a vertical annular channel pneumatic type. The analytical dependence allows us to study the process separation of the cereal mixture into fractions and theoretically set the parameters separating system. Analysis of the trajectories of particles moving in a vertical mixture pneumatic channel ring type allows us to conclude that in the turbine separator can be effectively isolated from the cereal mixture light impurities, and only a small part of them can get into the full grain. Thus, the analysis trajectories cereal mixture allows determine the design parameters of the turbine separator at the stage designing.
  • Item
    Спосіб фумігації зерна мобільним пристроєм
    (КНТУ, 2013) Орлова, О. М.; Orlova, O.
    Проведений аналіз основних конструктивних розробок пристроїв для захисту зернопродуктів від шкідників. Запропоновано використовувати спосіб фумігації мобільним пристроєм. Conduct a review of the basic methods and apparatus for fumigation of grain and choose the most effective way to control pests in silos and granaries The review of the main designs of devices is carried out for protect grain products against wreckers. It is offered to use a way of fumigation by the mobilny device.
  • Item
    Модернизация пропашной сеялки
    (КНТУ, 2013) Несмиян, А. Ю.; Должиков, В. В.; Несміян, А. Ю.; Nesmiyan, Andrew; Dolzhikov, Valery
    В статье рассмотрена проблема обеспечения качественного высева семян. Выяснено, что конструкции дозирующих элементов высевающих аппаратов внедряются в производство без научного обоснования. Проведен анализ условий выноса семян из общей массы в семенной камере. Это позволило предложить конструктивное решение проблемы гарантированного присасывания и выноса семени из семенной камеры. У статті розглянута проблема забезпечення якісного висіву насіння. З'ясовано, що конструкції дозуючих елементів висівних апаратів впроваджуються у виробництво без наукового обґрунтування. Проведено аналіз умов виносу насіння із загальної маси в насіннєвій камері. Це дозволило запропонувати конструктивне рішення проблеми гарантованого присмоктування і виносу насіння з насіннєвої камери. The article considers the problem of providing quality sowing seeds row crops. It was found that the introduction of dosing elements designs sowing apparatuses in production come from the technological the simplicity of their manufacture or tradition, without scientific evidence. To resolve this issue, an analysis of the conditions for the removal of the total weight seeds in the seed chamber. The results of the research by the authors proposed a constructive solution to the problem of guaranteed suction and removal of seed from the seed chamber. In the proposed design pneumatic vacuum sowing role adaptive dosing elements operate slot formed by the intersection of radial slots in the seed disc and figured laying slits in the vacuum chamber. The same solution can eliminate the phenomenon sowing extra seeds.
  • Item
    Експериментальні дослідження впливу параметрів транспортера–сепаратора на показники його роботи
    (КНТУ, 2013) Мороз, С. М.; Васильковський, О. М.; Moroz, Serhiy; Vasilkovskiy, Olexiy
    В статті описані результати експериментальних досліджень конструкції розробленого транспортера–сепаратора зерноочисної машини загального призначення. Встановлено вплив конструктивних і технологічних параметрів на якісні показники його роботи. Це дозволить використовувати отримані залежності при створенні конструкцій зерноочисних машин. This article describes experimental results of a design developed by the conveyor–separator grain cleaning machine for general use. During the studies found the motion of the particles of the material after unloading buckets in the space between the buckets depending on the angle of the surface and accelerating rods sieve. Revealed the impact of moisture grain material and debris major impurities in the grain sifting through the surface of the separation by changing specific load width sieve. The character of the influence of design and process parameters on the quality of its performance, including more influential factors were slope and sieve unit load on it. Regularities of changes in spending power to drive the conveyor–separator. Installed rational values of design and process parameters can be used to create designs winnowing machines.
  • Item
    Устройство для определения дальности полета пласта почвы после схода его с лемеха наклонного рыхлителя
    (КНТУ, 2013) Мнушко, П. Н.; Мнушко, Н. А.; Мнушко, П. М.; Мнушко, М. О.; Mnushko, P.; Mnushko, N
    Статья посвящена разработке устройства для определение дальности полета пласта после схода его с лемеха наклонного рыхлителя. Найденная длина даст возможность выдвинуть долото вперед от лемеха на такое расстояние, которое будет способствовать уменьшению тягового сопротивления. Устройство состоит из тензометрической тележки, сделанной на базе рамы культиватора-плоскореза КПП-2,2, наклонного рабочего органа и сенсорного датчика, закрепленного на стойке наклонного рыхлителя. Полевые эксперименты, проведнные с использованием данного усторойства дадут возможность замерять дальность полета пласта, тяговое сопротивление при разной скорости движения и глубине обработки. Стаття присвячена розробці пристрою для визначення дальності польоту брили грунту після сходу її з лемеша нахиленого розпушувача. Знайдена довжина дасть можливість висунути долото вперед відносно лемеша на таку відстань, яка сприятиме зменшенню тягового опору. Пристрій складається з тензометрічного візка, зробленого на базі рами культиватора-плоскорізу КПП-2,2, нахиленого робочого органу та сенсорного датчика, закріпленого на його стійці. Польові експерименти, проведені з використанням цього пристрою дадуть можливість виміряти довжину польоту брили грунту, тяговий опір нахиленого знаряддя при різній швидкості руху та глибині обробітку. The article is devoted to development of device for determination of distance of flight of layer after the east of him from the ploughshare of sloping ripper. The found length will enable to pull out a chisel forward from a ploughshare on such distance which will be instrumental in diminishing of hauling resistance. A device consists of strain gauge trolley, frame of cultivator-ploskorez of KPP-2,2, sloping working organ and sensory sensor, fastened on the bar of sloping ripper, done on a base. Field experiments, conducted with the use of this deuise will enable to measure distance of flight of layer, hauling resistance at the different rate of movement and depth of treatment.
  • Item
    Отримання динамічних характеристик сигналу навантаження норії при різних розміщеннях компонентів системи контролю навантаження
    (КНТУ, 2013) Минайленко, Р. М.; Minailenko, R.
    В статті розглядається питання отримання динамічних характиристик сигналу навантаження норії при різних розміщеннях компонентів системи контролю навантаження. Показано, що в умовах підприємств зернопереробної промисловості має місце територіальна віддаленість та розосередженість електричних споживачів, а також пультів управління від виконавчих механізмів. На основі проведених досліджень представлено варіанти можливого розміщення компонентів системи контролю навантаження та висвітлено проблему обробки корисного сигналу навантаження норії. In the article the question receipt of dynamic descriptions signal loading noria is examined at the different placing components the checking loading system. It is rotined that a territorial removal and dispersal electric users takes a place in the conditions enterprises grainprocess industry, and also control stands from executive mechanisms. On the basis the conducted researches the variants of the possible placing components the checking loading noria system are presented and the problems of the useful signal loading noria processing are lighted up.
  • Item
    Визначення основних параметрів шнекового відокремлення рослинної сировини при боковій подачі
    (КНТУ, 2013) Мілько, Д. О.; Milko, D.
    В статті наведено теоретичні аспекти щодо визначення основних параметрів, що характеризують процес шнекового відокремлення рослинної сировини при боковій подачі. Currently screw devices are becoming increasing application. Screws used for transportation, dosing, etc. However, theoretical researches in the processes of cutting plant monoliths screws are not enough. Theoretical aspects of the definition of main parameters describing cut of preserved forage by screw with side filing are considered in the article. In details, precise, indicators that affect performance the screw device were defined. This is chip thickness, kinematic mode indicator, etc. With these indicators we can proceed to the economic evaluation of this process.
  • Item
    Визначення параметрів кидання за умови зміни точки сходу матеріалу
    (КНТУ, 2013) Луц, C. М.; Харитонов, В. І.; Luts, S.; Kharitonov, V.
    Розглянуто методичний підхід розрахунку траєкторії польоту часток підстилкового матеріалу, який подається роторним розкидачем, при розподілі його по довжині стійла. Визначено залежність дальності її польоту від кута нахилу лопатей і перетину призми волочіння стружки. The calculation of the methodical approach flight path of the particles of bedding material that is fed rotary spreader, with its distribution along the length of the stall. Determined the dependence of its flight range of the angle of inclination of the blades and section Drawing prism chips.