Деформації канатів у муфтах від неспіввісності з урахуванням їх закріплення

Loading...
Thumbnail Image

Date

2016

Authors

Проценко, В. О.
Клементьєва, О. Ю.
Protsenko, V.
Klementyeva, О.

Journal Title

Journal ISSN

Volume Title

Publisher

КНТУ

Abstract

В статті виконані теоретичні дослідження видовження канатів сполучних муфт від неспіввісності поєднаних валів. Розглянуте вирішення задачі для випадків шарнірного та жорсткого закріплення канатів у напівмуфтах. Встановлено, що жорстке закріплення канатів спричиняє їх додатковий натяг. Показано, що в муфтах з тангенціальним розташуванням канатів додатковий натяг при їх жорсткому закріпленні менший ніж у муфтах з канатами хордального розташування. The work aimed of theoretical research rope extension of connecting coupling shafts misalignment to be connected with regard to their consolidation. It is shown that the ropes in the sleeve if unevenly loaded radial misalignment. To evaluate the deformation of the rope misalignment applied method closed-loop vector and method changes triangles. Settlement scheme for the coupling s chordal and tangential arrangement of ropes made up for their application. Couplings in these settlement schemes are given to the articulated four-link mechanism with adjustable rod length. The expressions for determining the instantaneous length of the rod, and therefore the instantaneous value of rope elongation, as well as catch their turn in the fastening places. The effect of these parameters on the basic design coupling parameter - mounting angle offsets, as well as a way to secure the ropes - tough and hinge. The solution of the problem for the case of swivel and fixed ropes in the coupling parts. The graphs illustrate this influence. It was found that the rigid fastening of ropes leads to further tension. It is shown that the coupling with the tangential arrangement of ropes additional tension in their rigid attachment less then than in couplings with ropes chordal arrangement. It is shown that from the standpoint of reducing the loading of shafts to be connected it is advisable to fix the ropes couplings hinged.

Description

Keywords

муфта, канат, розподіл, навантаження, неспіввісність, закріплення, coupling, rope, distribution, load, misalignment, consolidation

Citation

Проценко, В. О. Деформації канатів у муфтах від неспіввісності з урахуванням їх закріплення / В. О. Проценко, О. Ю. Клементьєва // Конструювання, виробництво та експлуатація сільськогосподарських машин : загальнодерж. міжвід. наук.-техн. зб. - Кропивницький : КНТУ, 2016. - Вип. 46. - С. 91-99.