Повышение сопротивляемости абразивному изнашиванию рабочих органов сельскохозяйственных машин

Loading...
Thumbnail Image

Date

2017

Authors

Николайчук, В. Я.
Соловых, Е. К.
Ворона, Т. В.
Катеринич, С. Е.
Ніколайчук, В. Я.
Солових, Є. К.
Катеринич, С. Є.
Nikolaychuk, V.
Solovykh, Ye.
Vorona, T.

Journal Title

Journal ISSN

Volume Title

Publisher

ЦНТУ

Abstract

Проведены исследования износостойкости стальных покрытий при трении по абразиву. Показана целесообразность изготовления рабочих органов сельскохозяйственной техники, эксплуатирующихся при наличии абразива, с покрытиями из сталей мартенситного класса для повышения их сопротивляемости абразивному изнашиванию. Испытания ножей с покрытиями из мартенситной стали 40Х13 показали повышение их износостойкости на 25-30%, а срока службы - в 2,5-3 раза. Проведено дослідження зносостійкості сталевих покриттів при терті по абразиву. Показана доцільність виготовлення робочих органів сільськогосподарської техніки, що експлуатуються при наявності абразиву, з покриттями із сталей мартенситного класу для підвищення їх опору абразивному зношуванню. Випробування ножів з покриттями з мартенситної сталі 40Х13 показали підвищення їх зносостійкості на 25-30%, а терміну служби - в 2,5-3 рази. Manufacture of working bodies of agricultural machines with wear-resistant coatings is carried out, as a rule, in order to increase their resistance to abrasive wear. To counteract the effects of abrasive media, the metal must have a solid component. Such a component in the metal can be carbides, borides, carbborides, carbonitrides, intermetallic compounds, and in some cases these functions can perform martensite. The results of the research showed that one of the most effective ways to solve the problem of increasing the wear resistance and the service life of the working parts of agricultural machines operating in the presence of abrasive particles is the use of electric arc spraying of coatings in combination with electrocontact treatment. The tests of the coatings have shown the effectiveness of the application of gas-thermal spraying and electrocontact treatment for the production of coatings with high physicomechanical and tribological properties. According to the results of the studies the best resistance to abrasive wear showed a coating of 40X13 steel. Thus, it is most expedient to use coatings of martensitic steels for the manufacture of working bodies of agricultural machinery, which are operated in the presence of abrasive. Investigations of the wear resistance of steel coatings in abrasive friction have been carried out. It is shown, expediency, the working bodies of agricultural machinery, operating in the presence of abrasive, be made from a coating of martensitic grade steels to increase their resistance to abrasive wear. Tests of knives with coatings from martensitic steel 40X13 showed an increase in their wear resistance by 25-30%, and their service life by 2.5-3 times.

Description

Keywords

износостойкость, рабочие органы, сопротивление абразивному изнашиванию, покрытия, газотермическое напыление, электроконтактная обработка, зносостійкість, робочі органи, опір абразивному зношуванню, покриття, газотермічне напилення, електроконтактна обробка, wear resistance, working bodies, resistance to abrasive wear, coatings, gas-thermal spraying, electrocontact treatment

Citation

Повышение сопротивляемости абразивному изнашиванию рабочих органов сельскохозяйственных машин / В. Я. Николайчук, Е. К. Соловых, Т. В. Ворона, С. Е. Катеринич // Конструювання, виробництво та експлуатація сільськогосподарських машин : загальнодерж. міжвід. наук.-техн. зб. - Кропивницький : ЦНТУ, 2017. - Вип. 47, ч. 1. - С. 99-104.