Теоретичний аналіз умов проходження зернівки крізь шар обчісаного вороху зернових

Loading...
Thumbnail Image

Date

2017

Authors

Леженкін, І. О.
Lezhenkin, І.

Journal Title

Journal ISSN

Volume Title

Publisher

ЦНТУ

Abstract

У статті розглянуто побудову математичної моделі ймовірності проходження зернівки крізь шар обчісаного вороху зернових, а також проведено аналіз отриманої моделі. The article deals with the construction of a mathematical model for the probability of grain passing through a layer of combed heap of cereals, and an analysis of the model obtained. As a result of the modelling it has been revealed that: - in the case when the distance between the straws is bigger than the length of the grain and the diameter of the straw, the probability of sifting the grain is 0.875, under the condition that the distance between the straws is 10 mm; - if the distance between the straw is less than the sum of the diameter of the straw and the grain length, and at the same time more than the sum of the diameter of the straw and the width of the grains, then the probability of passing the grains through the straw is within the range of 0.85 ... 0.877 at the distance between straws of 6.0 ... 8, 05 mm; - if the distance between the straws is less than the sum of the straw diameter and the width of the grains, the probability of sifting both in the horizontal arrangement of the grains and in the vertical one is equal to zero. In order to provide the necessary conditions for the grains to pass through layers of straw there should be used the operating element that has the potential of mechanical impact on the bundle.

Description

Keywords

ймовірність просіювання, обчісаний ворох, математична модель, зернівка, сепарація, сегрегація, mathematical model, probability of sifting, combed heap, grain, separation, segregation

Citation

Леженкін, І. О. Теоретичний аналіз умов проходження зернівки крізь шар обчісаного вороху зернових / І. О. Леженкін // Конструювання, виробництво та експлуатація сільськогосподарських машин : загальнодерж. міжвід. наук.-техн. зб. - Кропивницький : ЦНТУ, 2017. - Вип. 47, ч. 2. - С. 112-123.