Травмування зерна пшениці зерноочисною машиною ОВУ–25 та шляхи його зниження

Loading...
Thumbnail Image

Date

2019

Authors

Писарькова, І. О.
Писарькова, И. О.
Pisarkova, I.

Journal Title

Journal ISSN

Volume Title

Publisher

ЦНТУ

Abstract

Проведені дослідження з визначення рівня механічного травмування зерна при первинному очищенні машиною ОВУ–25. Отримана залежність коефіцієнта пошкодження (Kп, %) зерна від вологості (W, %) в різних зонах машини. Данні служать для вибору геометрії поверхонь робочих органів очисника вороху з метою зниження травмування зерна. Проведены исследования для определения уровня механического травмирования зерна при первичной очистке на машине ОВУ–25. Полученны зависимости коэффициента повреждения (Kп,%) зерна от влажности (W,%) в разных зонах машины. Данные служат для выбора геометрии поверхностей рабочих органов очистителя вороха с целью снижения травмирования зерна. nvestigation of the influence of the operating and transporting parts of the universal heap cleaner OVU-25 on damage and seed quality in order to ensure minimal influence of the operating parts of technical means on grain material in preparation for long-term storage due to repeated processing on technological equipment. The zones of greatest influence of the operating parts of grain cleaning machine OVU-25 in contact with the particles of the processed material are determined. Experimental studies were conducted to identify the level of mechanical damage of the grain during the initial cleaning by this machine. The quantitative composition of the operating parts and their technological characteristics were determined. The experimental data of the damage factor (Kp,%) of grain from humidity (W,%) in different operating zones of the machine on the basis of which graphical dependences were obtained. The influence of technological parameters of the operating parts on damage of grains was also identified. It has been established that the maximum damage of grain occurs in contact with the scrapers of conveyors, and the least damage occurs in the aspiration channels of the air purification system. Factors affecting the damage to the particles of the treated material were also investigated and identified. It is established that the damage of grains is influenced by the conditions of their contact with the surfaces, the characteristics of the contact surfaces, the length of the path of movement of the material, the speed of its movement and strokes during the cleaning process. All these observations make it possible to identify the drawbacks of the technological schemes of similar grain-cleaning machines and to substantiate proposals for changes in the structures of operating and transporting parts, materials and geometry of contact surfaces. The data are used to select the geometry of the surfaces of the operating parts of the heap cleaner in order to reduce grain damage.

Description

Keywords

травмування, удар, тертя, зерно, вологість, контрольні зони, травмирование, удар, трение, зерно, влажность, контрольные зоны, damage, stroke, friction, grain, humidity, control zones

Citation

Пісарькова, І. О. Травмування зерна пшениці зерноочисною машиною ОВУ–25 та шляхи його зниження / І. О. Пісарькова // Центральноукраїнський науковий вісник. Технічні науки : зб. наук. пр. - Кропивницький : ЦНТУ, 2019. - Вип. 1 (32). - С. 11-16.