Browsing by Author "Skrypnyk, O."
Now showing 1 - 20 of 47
Results Per Page
Sort Options
Item Using 3D-printing for education on of foundry students(Wloclawek: Republic of Poland, 2019) Kononchuk, S.; Skrypnyk, O.; Pukalov, V.; Конончук, С. В.; Скрипник, О. В.; Пукалов, В. В.The study of additive technologies gives foundry students a better understanding of the casting design, casting system, features of placement and mounting of the rod in the form, design, sequence of manufacture and location on the plates of modeling equipment, design and operation of mechanisms, and obtaining competencies in particular, the ability to think and reproduce spatial objects, structures and mechanisms in the form of projection drawings and three-dimensional geometric models, to use computer-aided design (CAD), manufacturing (CAM), engineering research (CAE) and specialized application software to solve engineering problems.Item Вебінар як складова дистанційної освіти(Publishing House „Education and science” s.r.o., 2015) Свяцький, В. В.; Скрипник, О. В.; Sviatskyi, V.; Skrypnyk, O.Розглянуто вебінар як складова дистанційної освіти. The webinar as a component of distance education is considered.Item Виготовлення безпористих деталей з використанням газогідратних технологій(Science and education LTD, 2015) Скрипник, О. В.; Клименко, В. В.; Свяцький, В. В.; Віхтоденко, А. А.; Skrypnyk, O.; Klymenko, V.; Sviatskyi, V.; Vikhtodenko, A.Розглянуто спосіб виготовлення безпористих деталей з використанням газогідратних технологій. The method of manufacturing of non-porous parts using gas-hydrated technologies is considered.Item Виготовлення деталей тиском ударної хвилі(АА Тандем, 2017) Скрипник, О. В.; Свяцький, В. В.; Skrypnyk, O.; Sviatskyi, V.Запропоновано спосіб вибухового штампування з метою підвищення безпеки та збільшення економічної ефективності технологічного процесу за рахунок використання стабільних газових компонентів, застосування більш простого технологічного обладнання. The method of explosion forming is proposed with the aim of increasing safety and increasing the economic efficiency of the process through the use of stable gas components and the use of simple process equipment.Item Газогідратні технології в імпульсних процесах обробки тиском(НТУ "ХПІ", 2017) Скрипник, О. В.; Свяцький, В. В.; Skrypnyk, O.; Sviatskyi, V.Наведено нові технічні рішення по використанню газогідратів як джерела енергії в імпульсних процесах обробки тиском. Запропоновано спосіби штампування з метою підвищення безпеки та збільшення економічної ефективності технологічного процесу за рахунок використання стабільних газових компонентів, застосування більш простого технологічного обладнання. New technical decisions on the use of gas hydrates as an energy source in impulse processes of pressure treatment are given. The methodі of forming is proposed with the aim of increasing safety and increasing the economic efficiency of the process through the use of stable gas components and the use of simple process equipment.Item Двоступеневий спосіб заморожування продукції для подальшого сублімаційного сушіння(Український інститут промислової власності, 2013) Клименко, В. В.; Скрипник, О. В.; Клименко, В. В.; Klymenko, V.; Skrypnyk, O.; Klymenko, V.Двоступеневий спосіб заморожування продукції для подальшого сублімаційного сушіння, згідно з яким на заморожувану продукцію безпосередньо діють низькотемпературним інертним холодильним агентом, який складається з двох рівноважних фаз - рідкої та парової, у дві стадії, із додатковим утворенням мікрофрагментів твердої фази у вигляді газових гідратів, безпечних для клітинних структур. На першій стадії утворюють тільки газові гідрати при температурі, вищій ніж 0 °С. На другій стадії заморожують продукцію до температури, яка визначається умовами подальшого сублімаційного сушіння, наприклад -30-40 °С. Перед дією низькотемпературним інертним холодильним агентом на заморожувану продукції з неї видаляють повітря шляхом його відсмоктування до досягнення величини тиску над нею, не меншим від рівноважного тиску насиченої водяної пари при кріоскопічній температурі заморожуваної продукції. The two-stage method of freezing the products for further sublimation drying, according to which the frozen product directly operates a low-temperature inert refrigerant, consisting of two equilibrium phases - liquid and steam, in two stages, with the additional formation of solid phase microfragments in the form of gas hydrates, safe for cell structures. At the first stage only gas hydrates are formed at a temperature higher than 0 ° С. In the second stage, the products are frozen to a temperature determined by the conditions of further sublimation drying, for example -30-40 ° C. Prior to acting as a low-temperature inert refrigerant for frozen products, air is removed from it by suction until it reaches a pressure above it, not less than the equilibrium pressure of the saturated water vapor at the cryoscopic temperature of the frozen product.Item Дослідження впливу конструкції шлаковловлювача на ефективність затримки шлаку в середовищі параметричного моделювання SolidWorks Flow Simulation(ЦНТУ, 2020) Конончук, С. В.; Скрипник, О. В.; Свяцький, В. В.; Пукалов, В. В.; Kononchuk, S.; Skrypnyk, O.; Sviatskyi, V.; Pukalov, V.; Свяцкий, В. В.В статті досліджено вплив конструкції шлаковловлювача на ефективність затримки шлаку. В САЕ-модулі параметричного моделювання SolidWorks Flow Simulation підтверджено можливість зменшення швидкості руху розплаву за рахунок використання шлаковловлювача з гальмуючими ребрами. Запропоновано оригінальну конструкцію ребристого шлаковловлювача, яка забезпечує вловлювання шлаків та плавне заповнення форми сплавом за рахунок зниження швидкості руху розплаву без додаткових витрат металу. Встановлено, що швидкість потоку по висоті перерізу запропонованого ребристого шлаковловлювача менша на 0,028 м/с або 14,5 % у порівнянні з традиційним. З використанням надрукованого на 3D принтері ребристого шлаковловлювача була виготовлена ливарна форма, яка показала задовільну формувальну здатність. SolidWorks Flow Simulation Parametric Modeling Environment The most common technology for the manufacture of metal parts and work pieces is casting. High-tech branches of mechanical engineering require the production of high-quality castings of complex configuration from modern alloys with a given chemical composition and mechanical properties. The analysis of the causes of slag inclusions and ways to prevent them showed that in addition to technological means related to quality preparation of metal before pouring, a significant role is played by quiet continuous pouring of metal and properly designed foundry system, including slag trap. However, the use of the most common foundry systems (braking, throttle, with centrifugal slag traps, rain, siphon) to increase the efficiency of slag retention is associated with increased metal consumption, and as a consequence, leads to an increase in the cost of casting. Conducting experimental research by varying the design of the slag trap leads to an increase in the number of field experiments, given their complexity, limited by great difficulties. On the other hand, computer flow modeling allows to study the influence of slag trap design on the flow rate of the melt at the design stage and significantly reduce the cost of introduction of new castings. In order to reliably capture slag and reduce the speed of movement of the melt in the foundries, which provides a smooth filling of the form with an alloy, but without additional costs of metal, the original design of the ribbed slag catcher is proposed. The results of parametric modeling of the melt flow in the channel of the ribbed slag trap showed a decrease in the flow rate along the cross-sectional height of the slag trap compared to traditional by 0.028 m / s or 14.5%. This allowed to reduce the length of the slag trap to the first feeder. The expected metal savings are 0.26%. The form made using a 3D model of the slag trap showed satisfactory molding ability. But the obtained research results are of a recommendatory nature and require practical verification in the production environment. In addition, by varying parameters such as the height of the ribs, the distance between them, the angle of inclination, we can obtain similar results for different castings of different alloys. Given all this, there is a need for further study of the impact of the design of the slag trap on the efficiency of slag retention. В статье исследовано влияние конструкции шлакоуловителя на эффективность задержки шлака. В САЕ-модуле параметрического моделирования SolidWorks Flow Simulation подтверждена возможность уменьшения скорости движения расплава за счет использования шлакоуловителя с тормозящими ребрами. Предложена оригинальная конструкция ребристого шлакоуловителя, которая обеспечивает улавливание шлаков и плавное заполнение формы сплавом за счет снижения скорости движения расплава без дополнительных затрат металла. Установлено, что скорость потока по высоте сечения предложенного ребристого шлакоуловителя меньше на 0,028 м/с или 14,5 % по сравнению с традиционным. С использованием напечатанного на 3D принтере ребристого шлакоуловителя была изготовлена литейная форма, которая показала удовлетворительную формовочную способность.Item Застосування у штампуванні газогідратних технологій(Політехніка, 2017) Скрипник, О. В.; Свяцький, В. В.; Skrypnyk, O.; Sviatskyi, V.Запропоновано спосіб вибухового штампування з метою підвищення безпеки та збільшення економічної ефективності технологічного процесу за рахунок використання стабільних газових компонентів, застосування більш простого технологічного обладнання. The method of explosion forming is proposed with the aim of increasing safety and increasing the economic efficiency of the process through the use of stable gas components and the use of simple process equipment.Item Змішувач для виготовлення формівної та стержневої суміші(Український інститут інтелектуальної власності, 1998) Кошурко, В. О.; Скрипник, О. В.; Koshurko, V.; Skrypnyk, O.Винахід відноситься до ливарного виробництва, а точніше до устаткування, яке виготовляє формівні та стержневі суміші по типу бігунів періодичної дії. Змішувач складається з чаші, тумби, електродвигуна, розташованого нижче днища чаші, редуктора, траверси. The invention relates to the foundry production, or more precisely to the equipment, which manufactures forming and core sand mixes of the type of runners of periodic action. A mixer consists of a cup, a stone, an electric motor located below the bottom of cup, a reducer, traverses.Item Змішувач для виготовлення формівної та стержневої суміші(Український інститут інтелектуальної власності, 1998) Скрипник, О. В.; Кошурко, В. О.; Skrypnyk, O.; Koshurko, V.Змішувач для виготовлення формівної та стержневої суміші складається з чаші, тумби з вертикальним валом, зробленим з можливістю обертання від приводу, що складається з електродвигуна, розташованого нижче днища чаші, редуктора, траверси, що закріплена на верхнім кінці вала, котків, які виготовлено з можливістю обертання відносно осей, які закріплені на траверсі, плужків, закріплених на траверсі, при цьому днище зроблено подвійним з порожниною між верхнім та нижнім днищем, яке за допомогою штуцера з'єднане з мережею стисненого повітря, який відрізняється тим, що верхнє днище виготовлено з секторів, в яких зроблено прямокутні отвори, оснащені клапанами у вигляді гнучкого елементу, який закріплено на секторі за допомогою гвинта. The mixer for making the molding and rod mix consists of a bowl, a vertical roller pedestal made with the possibility of rotation from the drive consisting of an electric motor located below the bottom of the bowl, a gear unit, a traverse attached to the upper end of the shaft, rollers that are made with the ability the rotation relative to the axes, which are fixed on the traverse, the plows attached to the traverse, while the bottom is made with a double cavity between the upper and lower ends, which, by means of the nozzle, is connected to the compressed air network, which characterized in that the upper bottom is made of sectors in which rectangular openings are made, equipped with valves in the form of a flexible element, which is fixed to the sector with a screw.Item Змішуючі бігуни(Український інститут промислової власності, 2000) Кошурко, В. О.; Скрипник, О. В.; Мартинов, В. В.; Koshurko, V.; Skrypnyk, O.Змішувальні бігуни складаються із нерухомої чаші з розвантажувальним вікном, котків і плужків, розташованих в ній і, закріплених на траверсі. Траверса змонтована на вертикальному валі, що приводиться в дію від приводу. Траверсу оснащено додатковими плужками, розташованими нижче рівня висоти шару суміші. A mixing runners consist of a fixed pan with unloading window, rollers and plows located in it and fixed on a traverse. A traverse is installed on the vertical shaft, which is set in action from the drive. Traverse is equipped with additional plows located lower than the level of the height of layer of mixture.Item Комп’ютерне моделювання процесу прямого пресування через різні профілі матричних лійок(ЦНТУ, 2020) Свяцький, В. В.; Скрипник, О. В.; Конончук, С. В.; Sviatskyi, V.; Skrypnyk, O.; Kononchuk, S.; Свяцкий, В. В.Виходячи з аналізу напруженого і деформованого стану стадії пресування, що встановилася, запропоновано використовувати профіль матричної лійки, виконаний по лінії ковзання, що розділяє пружну і пластичну зону. Результати теоретичних досліджень, комп’ютерного моделювання процесу прямого пресування за допомогою програмного комплексу Deform 2D/3D, експериментальних дослідів показали, що кращі умови пресування досягаються через матрицю із профілем, який виконаний по лінії ковзання. The stressed and deformed state of the metal and the dimensions of the center of deformation during pressing depend significantly on the design of the tool and, in particular, on the shape of the matrix funnel. However, there is still no single point of view on the influence of the geometry of the deformation center on the energy forces of the metal pressing process. Based on the analysis of the field of slip lines of the steady-state stage of pressing through a symmetric single-point matrix, it is proposed to use the profile of the matrix funnel made along the slip line separating the elastic and plastic zones. The following types of matrix funnel profiles were investigated using computer simulation of direct extrusion of lead samples with a drawing value 81 at a speed of 1 mm/s: cycloid concave; convex; the second convex, which is built on the logarithmic dependence; conical and concave, which is built along a sliding line that separates the elastic zones from the plastic in the pressing process. The results of theoretical studies, computer simulations of the direct pressing process using the Deform 2D/3D software package, and experimental experiments have shown that optimal energy-power conditions are achieved by pressing through a matrix that has a profile made along the slip line. The results of the experimental study of the kinetics of the flow of the discrete medium showed that the shape of the matrix funnel influences the size of the deformation center and the distribution of the resulting deformation in the molding. From the analysis of deformation of the granules, it is determined that the concave funnel, built along the slip line, is characterized by a curvature of the axisymmetric particles in the direction of deformation. These curvatures decrease as the granules move to the axis of symmetry of the matrix. It is noted that for a convex funnel, the length of the deformation center is greatest; for a conical metal flow is close to the radial in the direction of the truncated cones. На основе анализа поля линий скольжения установившейся стадии прессования через симметричную одноочковую матрицу предложено использовать профиль матричной воронки, выполненный по линии скольжения, разделяющий упругую и пластическую зону. Результаты теоретических исследований, компьютерного моделирования процесса прямого прессования с помощью программного комплекса Deform 2D/3D, экспериментальных опытов показали, что оптимальные энергосиловые условия достигаются при прессовании через матрицу, которая имеет профиль, выполненный по линии скольжения.Item Критерії вибору засобів організації системи дистанційного навчання(Science and education LTD, 2014) Свяцький, В. В.; Скрипник, О. В.; Sviatskyi, V.; Skrypnyk, O.Визначені критерії засобів організації дистанційної освіти через вибір електронного навчального середовища, що забезпечує організацію навчального процесу. The criteria for organizing distance education through the choice of an electronic learning environment that ensures the organization of the educational process are determined.Item Люнет для направлення рушничних свердел(ДП “Український інститут інтелектуальної власності”, 2021) Свяцький, В. В.; Скрипник, О. В.; Молокост, Л. А.; Пух, Є. В.; Гуслістий, В. В.; Sviatskyi, V.; Skrypnyk, O.; Molokost, L.; Pukh, Y.; Huslistyi, V.Люнет для направлення рушничних свердел, у корпусі якого встановлені обертові циліндричні ролики, рухливі в напрямку, перпендикулярному осі свердла під дією механічного зусилля, у зовнішню поверхню яких упираються вершини канавки для виходу стружки, і які мають ширину, трохи більшу діаметра свердла, і нерухливі ролики, що мають профіль, відповідний до профілю свердла, при цьому рухливі і нерухливі ролики розташовані попарно в одній площині уздовж осі свердла, згідно з корисною моделлю рухливі і нерухливі ролики оснащені демпфувальними перекладками. A lunette for directing rifle drills, in the body of which are installed rotating cylindrical rollers, movable in a direction perpendicular to the axis of the drill under the action of mechanical force, against the outer surface of which the tops of the grooves for the exit of chips rest, and which have a width slightly greater than the diameter of the drill, and stationary rollers , having a profile corresponding to the profile of the drill, while the movable and immovable rollers are located in pairs in one plane along the axis of the drill, according to the useful model, the movable and immovable rollers are equipped with damping spacers.Item Методичні вказівки до виконання лабораторних робіт з курсу "Комп'ютерне проектування обладнання ливарного виробництва" для студентів спеціальності 131 “Прикладна механіка”(ЦНТУ, 2019) Скрипник, О. В.; Skrypnyk, O.Об’єктом вивчення дисципліни "Комп’ютерне проектування обладнання ливарного виробництва" є можливість використання студентами ПК при розробці конструкторської документації при проектуванні обладнання ливарних цехів, реалізація високопродуктивної технології проектування, підвищення якості проектування та техніко-економічних показників створюваного обладнання, зменшення матеріальних витрат та трудомісткості проектування.Item Перспективи розвитку способу виготовлення піщаних форм по льодяним моделям(ЦНТУ, 2017) Скрипник, О. В.; Клименко, В. В.; Свяцький, В. В.; Конончук, С. В.; Skrypnyk, O.; Klymenko, V.; Sviatskyi, V.; Kononchuk, S.Розглянуто застосування кріогеніки для одержання металевих виливків у піщаних формах для реалізації маловідходної і безвідхідної технології з повторним використанням формувальних матеріалів. The use of cryogenics for metal castings production in sand forms for the implementation of low-waste and non-waste technology with the repeated use of molding materials is considered.Item Перспективні напрямки технологічного застосування гідратів двооксиду вуглецю(ХНТУ, 2017) Скрипник, О. В.; Свяцький, В. В.; Skrypnyk, O.; Sviatskyi, V.Наведено аналіз останніх досліджень і приклади застосування газових гідратів двооксиду вуглецю. Наведено приклад можливості заміщення двооксидом вуглецю метану у природніх гідратах, організовуючи контрольований видобуток метану із субаквальних газогідратних покладів. Розглянуто питання про обмеження викиду парникових газів за рахунок їх уловлювання і зберігання за допомогою технології CCS (Carbon Capture and Storage). Наведено приклад каскадних систем на базі аміаку з двооксидом вуглецю із сумішами вуглеводнів як основу холодильних установок для одержання глибокого холоду. Розглянуто спосіб вибухового штампування з метою підвищення безпеки та збільшення економічної ефективності технологічного процесу за рахунок використання стабільних газових компонентів, застосування більш простого технологічного обладнання. Зроблено висновок, що використання двооксиду вуглецю в складі газових гідратів дозволяє на принципово нових основах істотно покращити технологічні процеси в різних галузях промисловості, а також ефективність енерго- та ресурсозбереження. The analysis of the latest studies and application examples of gas hydrates of carbon dioxide is given. An example of the possibility of replacing methane carbon dioxide in natural hydrates by organizing controlled methane production from subaquatic gas hydrate deposits is given. The issue of limiting the emission of greenhouse gases through their capture and storage using Carbon Capture and Storage technology is considered. An example of cascade systems based on ammonia with carbon dioxide and hydrocarbon mixtures as a basis for refrigeration facilities for obtaining deep cold is given. The method of explosive stamping is considered with the purpose of increasing safety and increasing the economic efficiency of the technological process due to the use of stable gas components, the use of more simple technological equipment. It is concluded that the use of carbon dioxide in gas hydrates allows essentially new ways to improve technological processes in various industries, as well as the efficiency of energy and resource saving.Item Перспективні напрямки технологічного застосування гідратів двооксиду вуглецю(ХНТУ, 2017) Скрипник, О. В.; Свяцький, В. В.; Skrypnyk, O.; Sviatskyi, V.Наведено аналіз останніх досліджень і приклади застосування газових гідратів двооксиду вуглецю. Наведено приклад можливості заміщення двооксидом вуглецю метану у природніх гідратах, організовуючи контрольований видобуток метану із субаквальних газогідратних покладів. Розглянуто питання про обмеження викиду парникових газів за рахунок їх уловлювання і зберігання за допомогою технології CCS (Carbon Capture and Storage). Наведено приклад каскадних систем на базі аміаку з двооксидом вуглецю із сумішами вуглеводнів як основу холодильних установок для одержання глибокого холоду. Розглянуто спосіб вибухового штампування з метою підвищення безпеки та збільшення економічної ефективності технологічного процесу за рахунок використання стабільних газових компонентів, застосування більш простого технологічного обладнання. Зроблено висновок, що використання двооксиду вуглецю в складі газових гідратів дозволяє на принципово нових основах істотно покращити технологічні процеси в різних галузях промисловості, а також ефективність енерго- та ресурсозбереження. The analysis of the latest studies and application examples of gas hydrates of carbon dioxide is given. An example of the possibility of replacing methane carbon dioxide in natural hydrates by organizing controlled methane production from subaquatic gas hydrate deposits is given. The issue of limiting the emission of greenhouse gases through their capture and storage using Carbon Capture and Storage technology is considered. An example of cascade systems based on ammonia with carbon dioxide and hydrocarbon mixtures as a basis for refrigeration facilities for obtaining deep cold is given. The method of explosive stamping is considered with the purpose of increasing safety and increasing the economic efficiency of the technological process due to the use of stable gas components, the use of more simple technological equipment. It is concluded that the use of carbon dioxide in gas hydrates allows essentially new ways to improve technological processes in various industries, as well as the efficiency of energy and resource saving.Item Принципи побудови математичної моделі газогенераторного процесу(ЦНТУ, 2019) Конончук, C. В.; Скрипник, О. В.; Свяцький, В. В.; Конончук, С. В.; Скрипник, О. В.; Свяцкий, В. В.; Kononchuk, S.; Skrypnyk, O.; Sviatskyi, V.В статті запропоновано новий підхід до вивчення взаємозв’язку між основними параметрами газогенераторного процесу; оригінальні методики розрахунків матеріального та теплового балансів процесу газифікації твердого палива; спосіб реалізації математичної моделі газогенераторного процесу на комп’ютері. В статье предложен новый подход в исследовании взаимосвязей между основными параметрами газогенераторного процесса; оригинальные методики расчета материального и теплового балансов процесса газификации твердого топлива; способ реализации математической модели газогенераторного процесса на компьютере. The need for the development and introduction of technologies in Ukraine that are capable of providing energy resources savings, improving sanitary and hygienic and economic indicators of production, encourage the search for and use of alternative energy sources, including gasification of solid fuels of local sources in gas generators. To solve problems of forecasting and optimization of the gas generator process on the basis of the study of the relationship between its parameters, as well as the calculation of the material and thermal balance of the gas generator, the principles of detection of the laws of heat and mass exchange, as well as the invention of the mathematical description of the process, taking into account the type of the gas generator process (direct, horizontal), quantity, temperature and chemical composition of fuel and blast. In order to study the relationship between the most important parameters of the gas generator process, a laboratory plant was developed in which the reverse gas generator process was implemented. However, the conduct of experimental studies in the variation of a large number of input parameters leads to an increase in the number of field experiments, given their complexity, is limited by great difficulties. Therefore, of the three possible types of mathematical models (theoretical, mixed and statistical) for gas generators in the present conditions, it is expedient to construct models of mixed type, when the mathematical structure of the model is determined theoretically, and the identification of the model is carried out using experimental data. The gas generator is considered as a static object with lumped parameters. The original methods of calculating the material and thermal balance of the gasification process of solid fuel have been developed, taking into account the variation of the input parameters. A block diagram of the solution of the problem of determining the temperature dependence of the generator gas and its amount from the air flow, which allows obtaining a computer program for solving this problem, has been developed. The given method of mathematical modeling of the gas-generating process allows to solve problems of forecasting and optimization of this process, gives the possibility of practical use of mathematical model at designing and operation of gas generators at enterprises of different industries.Item Пристрій для закріплення заготовок(ДП “Український інститут інтелектуальної власності”, 2021) Свяцький, В. В.; Скрипник, О. В.; Молокост, Л. А.; Черніченко, К. С.; Казимірко, Н. В.; Sviatskyi, V.; Skrypnyk, O.; Molokost, L.; Chernichenko, K.; Kazymirko, N.Пристрій для закріплення заготовок, на корпусі якого розміщена центрувальна гофрована втулка, призначена для взаємодії за допомогою кільця з гайкою, з'єднаною із тягою. З метою спрощення і здешевлення виготовлення пристрою, центрувальна гофрована втулка виконана набірною із тарілчастих пружин. A device for fixing workpieces, on the body of which there is a centering corrugated sleeve, designed to interact with a nut connected to a rod by means of a ring. In order to simplify and reduce the cost of manufacturing the device, the centering corrugated sleeve is made of plate springs.
- «
- 1 (current)
- 2
- 3
- »