Наукові публікації кафедри БДМБ
Permanent URI for this collectionhttps://dspace.kntu.kr.ua/handle/123456789/1353
Browse
8 results
Search Results
Item Досвід розрахунково-екпериментального оцінювання енергетичних показників будівлі школи(НУВГП, 2020) Настоящий, В. А.; Пашинський, В. А.; Пашинський, М. В.; Джирма, С. О.; Nastoiashchyi., V.; Pashynskyi, V.; Pashynskyi, M.; Dzhyrma, S.Висвітлена методика і результати оцінювання показників енергетичної ефективності будівлі школи з урахуванням теплових характеристик огороджувальних конструкцій, отриманих за даними вимірювань у процесі натурних обстежень. Проаналізовано вплив термомодернізації на клас енергетичної ефективності будівлі. During the examination, numerous damages of the outer wall cladding, unfilled seams between the wall blocks and poorly executed junction of window and door frames to a wall were revealed, where heat transfer is highly increased due to air leakage from the inside of the building. The actual values of the heat transfer resistance of walls and translucent structures, experimentally established using a thermohygrometer, do not meet the requirements of current standards. Examination of the outer walls and window blocks using a thermal imager revealed thermal anomalies that significantly reduce the thermal insulation characteristics of enclosure structures. It is noted that the use of technical devices makes it easy to detect thermal anomalies and to estimate the characteristics of enclosure structures. Based on the research results, an energy passport of the building was developed. The design value of specific energy consumption is 55.7 kW×h/m3. Taking into account the maximum value of 35 kW×h/m3 for educational institutions, that are a subject of thermal modernization, the building was examined and classified as energy efficiency class F. Design proposals have been developed for thermal modernization of the building by using ventilated facade systems with rockwool insulation. After thermal modernization, the specific energy consumption are reduced to 34.7 kW×h/m2, and the energy efficiency is improving to class C.Item Методика аналізу процесу теплопередачі у вузлах огороджувальних конструкцій будівель(ОДАБА, 2020) Джирма, С. О.; Пашинський, В. А.; Настоящий, В. А.; Пашинський, М. В.Розроблена методика визначення втрат тепла через вузли огороджувальних конструкцій довільної форми. Методика базується на аналізі температури внутрішньої поверхні огороджень і дозволяє визначати втрати тепла в зонах лінійних теплопровідних включень та відповідні лінійні коефіцієнти теплопередачі. Встановлені параметри чисельного розв'язку, які гарантують достатню точність результатів. Виконані приклади визначення втрат тепла та лінійних коефіцієнтів теплопередачі для характерних вузлів стін житлових і громадських будівель. Достовірність результатів підтверджена шляхом порівняння лінійних коефіцієнтів теплопередачі з відомими даними для типових вузлів. The energy needs of buildings should be determined taking into account heat losses through zones of increased thermal conductivity in the junctions of enclosure structures. For this, linear heat transfer coefficients are used, which are given in the Ukrainian standard for a number of typical junctions. Non-standard solutions of junctions of enclosure structures require the development of a simple method for determining heat loss, which can be used for the design of real buildings. The proposed method is based on the analysis of the process of heat transfer from internal air to the inner surface of the enclosure. To determine the amount of heat, it is necessary to select a junction with adjacent flat sections of the enclosure and by two-dimensional computer simulation to determine the temperature on the inner surface of the enclosure. The amount of heat transferred is determined by numerical integration of the temperature difference between the internal air and the inner surface of the enclosure, taking into account the heat transfer coefficient of this surface. By the multi-variant calculations, it was found that the width of the adjacent junctions to the flat wall sections should be about two thicknesses of the wall. For a sufficiently accurate determination of heat loss using the trapezoidal rule, the discretization step of the temperature of the inner surface should not exceed 40 ... 50 mm. The developed technique also allows to determine the linear heat transfer coefficient of the junction. It is equal to the difference between the total amount of heat transferred and the amount of heat that can be transmitted through the flat sections of the enclosure, divided by the temperature difference between the internal and external air. A comparison of the obtained results with the values of linear heat transfer coefficients known from the Standard for several typical wall units showed a discrepancy within 2.5%. Such accuracy level can be considered as satisfactory for the thermal calculations of enclosure structures. Given the ease of implementation, the developed method is recommended for use during calculations of the energy performance of buildings.Item Особливості використання піноскла в якості теплоізоляції в цивільних будівлях(ЦНТУ, 2018) Процик, К. М.; Омелянчук, І. М.; Джирма, С. О.; Protsyk, K.; Omelianchuk, I.; Dzhyrma, S.Item Методика імовірнісного оцінювання температурного режиму стін(УкрДАЗТ, 2014) Пашинський, В. А.; Плотніков, О. А.; Pashynskyi, V.; Plotnikov, O.Розроблена розрахункова методика визначення статистичних характеристик випадкового процесу змін температури внутрішньої поверхні стіни з відомими тепловими характеристиками за статистичними характеристиками температури зовнішнього і внутрішнього повітря. Порівняння з даними натурного експерименту вказує на задовільну збіжність результатів. We consider the wall of the house with the known thermal characteristics under constant temperature and indoor air temperature random. Based on the known regularity of the heat transfer and attenuation of temperature fluctuations in the thickness of fencing, obtained formulas for the numerical definitions of the mathematical expectation and standard random process temperature changes at the given point of the wall, depending on the relevant numerical characteristics of air temperature. For this wall thickness is divided into layers with constant thickness layer material properties. For each of the layers, the necessary thermal characteristics are sequentially determined, the attenuation coefficient of temperature fluctuations, the mathematical expectation and standard process temperature changes on the verge of layers. Mathematical expectation changes in proportion to the thermal resistance of the outer surface of the wall. Changes of standard have exponential character. The calculation results obtained by the method were compared with the results of numerical simulation by finite differences, and the results of natural observations of the temperature of the external and internal air, interior and exterior surface of the wall. Satisfactory convergence of the results confirmed the possibility of using the developed method for evaluating the thermal regime of the walls of their thermal characteristics and meteorological data on air temperature. The method is to be used in assessing the reliability of thermal walling.Item Методика оцінювання теплової надійності стін за критерієм тепловитрат(Луцький НТУ, 2014) Пашинський, В. А.; Плотніков, О. А.; Карюк, А. М.; Pashynskyi, V.; Plotnikov, O.; Kariuk, A.Розроблена імовірнісна методика оцінювання рівня теплової надійності огороджувальних конструкцій з урахуванням випадкового характеру властивостей будівельних матеріалів та температури атмосферного повітря. Методика базується на аналізі граничних нерівностей, сформованих на основі відомих закономірностей теплопередачі. Thermal reliability of the enclosures is analyzed by probabilistic methods taking into account random character of the structure dimensions, properties of the building materials and air temperature. Statistical characteristics of the heat resistance are calculated by function linearization of random values of the thickness and the coefficients of thermal conductivity of structural layers of the wall. Probability of the failure based on the criterion of insufficient resistance of the heat transfer equals the probability that normally distributed random value of the resistance of the heat transfer will be less than minimum acceptable value set by the design standards for given temperature area. Analysis of the impact of design parameters on statistical properties of the resistance of the heat transfer and value of the failure probability showed that the variability of the thickness of the wall layers can be ignored. The variability of the coefficients of the heat transfer must be considered only for efficient insulation and structurally-thermal insulation layers with large thermal resistance. The probability of the failure based on criterion of exceeding the maximum acceptable heat flow equals the probability that actual intensity of the heat flow through the enclosure will exceed certain threshold value. Maximum allowable intensity of heat flow is defined by the value of normative heat looses of the buildings during the heating season or by the value of heat transfer through properly designed enclosures in design terms of the operating. Certain incertitude in setting maximum allowable value of the intensity of the heat flow restricts the application of such method to the comparative evaluation of the heat reliability of the wall structures of the various types in close condition of the operation.Item Експериментальні дослідження теплового режиму стін житлових будинків(НУВГП, 2013) Пашинський, В. А.; Плотніков, О. А.; Pashynskyi, V.; Plotnikov, O.За результатами експериментального дослідження теплового режиму стіни житлової будівлі в режимі нормальної експлуатації протягом опалювального сезону встановлені статистичні характеристики процесів температури повітря й поверхонь стіни та залежності між ними, а також імовірності теплової відмови. According to the results of an experimental study of the thermal regime of the wall of a residential building in normal use during the heating season, set the statistical characteristics of processes of air temperature and the wall surfaces, the relationship between them, and the likelihood of heat rejection.Item Доцільні значення опору теплопередачі огороджень цивільних будівель в умовах України(ДП НДІБВ, 2017) Пашинський, В. А.; Карпушин, С. О.; Карюк, А. М.; Pashynskyi, V.; Karpushin, S.; Kariuk, A.Розроблена методика визначення доцільного опору теплопередачі огороджувальних конструкцій за критерієм мінімуму річних приведених витрат на опалення. Для кліматичних умов двох температурних зон України отримані та виражені аналітично залежності доцільного опору теплопередачі стін, суміщених покрівель, горищних перекрить та перекрить над підвалами від вартості теплової енергії. Отримані результати вказують на необхідність збільшення опору теплопередачі в умовах зростання вартості енергоносіїв. The method of determining the appropriate heat transfer resistance of walling for the criteria of minimum annual heating costs are developed. For the climatic conditions of the two temperature zones of Ukraine received and analytically described dependencies of reasonable heat transfer resistances of the walls, combined roofs, attic floors and overlapping of the basements from the cost of thermal energy. Obtained results pointing to needs of increasing heat transfer resistance in terms of increasing energy costs.Item Вибір показників теплової надійності огороджувальних конструкцій(Луцький НТУ, 2017) Пашинський, В. А.; Джирма, С. О.; Плотніков, О. А.; Pashynskyi, V.; Dzhyrma, S.; Plotnikov, O.На базі аналізу рівня теплової надійності огороджувальних конструкцій, запроектованих згідно з вимогами ДБН В.2.6-31:2016, розроблені отримано допустимі значення відносної тривалості теплових відмов за критеріями комфортності перебування поблизу стін та утворення конденсату на їх внутрішній поверхні. The article discloses suggestions for the selection of an appropriate level of thermal sufficiency of the walling of residential and public buildings. As an indicator of thermal sufficiency it is recommended to use the relative duration of the state of thermal failure. According to the method developed earlier the relative duration of the thermal failure condition of walling has been determined. The resistance to heat transfer in the conditions of different regions of Ukraine corresponds to the requirements of the current thermal insulation of buildings on the absence of condensation on the internal surfaces of walls and the comfort of staying at external walls. The obtained results vary significantly across the territory but their generalization to the safety margin allowed establishing the maximum permissible value of the relative duration of the thermal failure state equal to 0.005 for the walls of residential and public buildings of the sufficiency class CC 2 and 0.001 for the buildings of the sufficiency class CC 3.