Факультет будівництва, транспорту та енергетики
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/764
Browse
4 results
Search Results
Item Самозагострювання різальних елементів ґрунтообробних і землерийних машин в умовах зміцнення їх робочих поверхонь(ХНАДУ, 2012) Аулін, В. В.; Карпушин, С. О.; Тихий, А. А.; Aulin, V.; Karpushin, C.; Tikhiy, F.Розглянуто динаміку зміни напруженого стану і стану зношення різальних елементів робочих органів ґрунтообробних і землерийних машин за різних варіантів зміцнення. Виявлено вплив варіантів зміцнення на проявлення ефекту самозагострювання різальних елементів. The dynamics of stress state variation and wear for cutting elements of cultivating and earth-moving machine work tools has been considered in various reinforcement conditions. The effect of reinforcement conditions on self-sharpening of cutting elements has been ascertained.Item Вибіркове зношування робочих органів ґрунтообробних та землерийних машин як відображення стохастичної природи їх взаємодії з частинками ґрунту(УкрДАЗТ, 2014) Аулін, В. В.; Настоящий, В. А.; Тихий, А. А.; Aulin, V.; Nastoyashchiy, V.; Tihiy, A.У статті наведено результати дослідження механізму взаємодії робочих органів ґрунтообробних та землерийних машин (РОГЗМ) з дисперсним середовищем ґрунту та побудовано математичну модель цього процесу. Показано, що взаємодія частинок ґрунту з робочою поверхнею РОҐЗМ, має стохастичний характер і під силовим впливом обумовлює вибіркове зношування. Зношування розглядається як необоротний дисипативний процес з густиною прикладеної зовнішньої енергії. The article describes the working mechanism of interaction of tillage and earthmoving machines WMIEM to disperse the soil environment and the mathematical model of the process. Showing accessories work surface WMIEM the terms of interaction with the soil under the influence of power, resulting in observed sample of abrasive wear. Correlation wear as irreversible dissipative process with applied external energy density. Revealed that the formation of geometric shapes WMIEM in friction and wear is based on changes in the characteristics of the environment and the soil round the nature of its speed and relative motion. We study the patterns of contact with soil particles in the medium lower and upper surfaces of WO WMIEM and distribution of particles in the layer adjacent to the surface. Research subject WMIEM and their designs with cutting elements pointed bottom, top, both sides and blunt placed in the vertical and horizontal planes. Calculations are carried out on a PC to identify varying the deterministic and random components of the process for hardened wear and serial WMIEM.Item Стан самоорганізації середовища ґрунту та закономірності зносу робочих органів ґрунтообробних машин(ХНУ, 2013) Аулін, В. В.; Aulin, V.Розглянуто закономірність зміни щільності ґрунту від вмісту його органічної складової – гумусу. Показано, що при умові коли рівноважна і оптимальна щільності ґрунту співпадають реалізується стан самоорганізації ґрунту. Досліджено залежність зносу зразків і робочих органів від вмісту гумусу в ґрунті. Виявлено, що при вмісті гумусу, що визначає стан самоорганізації ґрунту, величина зносу мінімальна і подальше збільшення вмісту гумусу практично не впливає на знос. Soil is considered as an element tribosystem "working body-soil", in which there is an interaction between the working bodies of tillage machines and the soil itself. Revealed that this changes the soil state, its properties and characteristics. In the tribology of soils the main attention focused at the mineral component of its solid phase, which forms the soil density. The distribution density of the depth of different soil types is considered. Found that, depending on the type of soil the maximum and minimum values of the density can be located at different depths. There four types of soil are characterized for soil of Ukraine. Shown that the coincidences of value equilibrium and optimal density of states the conditions for the implementation of self-organization of soil are given. Proved that changing the content of the organic component of the solid phase of the soil can achieve the conditions under which there is a process of self-organization of the soil. Shown that this distribution of humus and porosity of different soil types on their depth. Found that in a state of self-organization humus has a certain value. Experimentally in a special laboratory bench, the dependence of wear and WOTM samples from the humus content in the soil. It is shown that when a state of self-organization of the soil and the minimum amount of wear with a further increase of humus content is virtually unchanged. This dependence is exponential. The research samples and wear WOTM of sliding distance for a fixed content of humus in the soil. Dependence in this case is nonlinear. The data obtained can be used for establishing new patterns in tribology soil, for WOTM choice for soil with different density distribution in depth, the development of advanced technologies for processing of soil and the development of a number of measures to restore the necessary properties of soils.Item Самозагострювання різальних елементів ґрунтообробних і землерийних машин в умовах зміцнення їх робочих поверхонь(ХНАДУ, 2012) Аулін, В. В.; Карпушин, С. О.; Тихий, А. А.; Aulin, V.; Karpushin, C.; Tikhiy, F.Розглянуто динаміку зміни напруженого стану і стану зношення різальних елементів робочих органів ґрунтообробних і землерийних машин за різних варіантів зміцнення. Виявлено вплив варіантів зміцнення на проявлення ефекту самозагострювання різальних елементів.The dynamics of stress state variation and wear for cutting elements of cultivating and earth-moving machine work tools has been considered in various reinforcement conditions. The effect of reinforcement conditions on self-sharpening of cutting elements has been ascertained.