Факультет будівництва, транспорту та енергетики
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/764
Browse
4 results
Search Results
Item Determining the rational composition of tribologically active additive to oil to improve characteristics of tribosystems(Technology Center, 2019) Aulin, V .; Hrynkiv, A .; Lysenko, S.; Zamota, T.; Pankov, A.; Tykhyi, A .; Аулін, В. В.; Гриньків, А. В.; Лисенко, С. В.; Замота, Т. М.; Панков, А. О.; Тихий, А. А.Formation studies rational composition tribologically active- No additives to the base oil are shown. to improve the performance of tribosystems. It is revealed that this tribologically active added- ka gives the opportunity to form tribological properties that provide normal conditions exploitation of connections of tribosystem parts. On the basis of optimization of the technical condition tribo- logically active additives obtained rational the value of each of its components. Optimization conducted on condition that the amount of wear should be kept to a minimum, and critical loading and loading of weld- not to the maximum. Based on the experimental databases on a four-ball friction machine the equation for each of the response functions is obtained the resulting features. The obtained regression equals- and the desirability of the order desirability function 0,698 made it possible to determine the composition of the tribo- logically active additives: metakaolin, dispers- sowing powder of clay from Katerynivska rhodo- higher, sodium oleate, lithium hydroxide and sulfur. It is established that when using received tribological active additives in the laboratory conditions recorded decrease in wear 26.8% increase in critical load; increase of load by 17.2% welding by 4.89%. Experimental analysis- their data indicates that the proposed tribolo- the active ingredient can be operated at local contact load in contact up to 1078 N and at peak over- tachings to 2372 N. The results of the studies give reason claim that it is proposed tribologically the active supplement gives the opportunity to improve characteristics of tribosystems. It can be useful service and road transport the benefits of technical service and for the manufacture of composite oil. Проведеними дослідженнями формування раціонального складу трибологічно активної добавки до базової оливи показана можливість покращення характеристик трибосистем. Виявлено, що дана трибологічно активна добавка дає можливість формувати трибологічні властивості, що забезпечують нормальні умови експлуатації спряжень деталей трибосистеми. На основі оптимізації технічного стану трибологічно активної добавки отримано раціональні значення кожного з її складових. Оптимізацію проведено за умов, що величина зношування повинна прямувати до мінімуму, а критичне навантаження та навантажування зварювання – до максимуму. На основі експериментальної бази даних на чотирикульковій машині тертя отримано рівняння для кожної з функцій відгуку результуючих ознак. Отриманні регресійні рівняння та значення функції бажаності порядку 0,698 дали можливість визначити склад трибологічно активної добавки: метакаолін, дисперсійний порошок глини з Катеринівського родовища, олеат натрію, гідрооксид літію та сірки. Встановлено, що при використанні отриманої трибологічної активної добавки в лабораторних умовах зафіксовано зменшення зношування зразків на 26,8 %, збільшення критичного навантаження на 17,2 %, збільшення навантажування зварювання на 4,89 %. Аналіз експериментальних даних свідчить, що пропоновану трибологічно активну добавку можливо експлуатувати при локальному контактному навантажуванні в контакті до 1078 Н та при піковому перенавантажуванні до 2372 Н. Результати досліджень дають підстави стверджувати, що пропонована трибологічно активна добавка дає можливість покращити характеристики трибосистем. Вона може бути корисною сервісним та автотранспортним підприємствам при проведені технічного сервісу та для виготовлення композиційної оливи.Item Determination of the rational composition of the additive to oil with the use of the Katerynivka friction geo modifier(University of Kragujevac, 2019) Aulin, V.; Lyashuk, O.; Hrynkiv, A.; Lysenko, S.; Zamota, T.; Vovk, Y.; Pankov, A.; Tykhyi, A.; Horkunenko, A.; Аулін, В. В.; Ляшук, О. Л.; Гриньків, А. В.; Лисенко, С. В.; Замота, Т. М.; Вовк, Ю. Я.; Панков, А. О.; Тихий, А. А.; Горкуненко, А. Б.Studies of the formation of the optimal composition of Tribological additives to the base oil have shown the possibility of improving the characteristics of the tribosystem. It was revealed that this Tribological additive makes it possible to form functional surface layers that provide normal operating conditions for tribological conjugation of parts. Based on the optimization of the technical condition of the Tribological additives, the optimal values of each of its components are obtained. Optimization of the condition provided that the amount of wear should tend to a minimum, and the maximum load and loading of the weld should tend to a maximum. Based on the experimental database on the 4-ball friction machine, an equation is obtained for each of the indicated response functions of the resulting features, based on which, with a desirability value of the order of 1.0, the composition of Tribological additives is obtained: from Katerynivka Friction geo modifiers; Sodium oleate, copper sulfate and phosphor TAT 33. It was found that the adding of TM-3-18k into the oil Tribological additives in the amount of 5.75 % under laboratory conditions can reduce the wear rate by 35.1 – 35.5 %, the maximum load also increases by 17.1 – 17.2 %, and the welding load increases by 5.3 – 8.4 %. The analysis of experimental data shows that this Tribological additive can be operated at locally loaded parts of 1035 N, and the peak contact overload is up to 2385 N. The research results suggest that the proposed Tribological supplement makes it possible to improve the characteristics of the tribosystem. It can be useful to service and trucking enterprises during technical service and for the manufacturing of composite oil. Дослідження формування оптимального складу трибологічних присадок до базової оливи показали можливість покращення характеристик трибосистеми. Було виявлено, що ця трибологічна присадка дає можливість формувати функціональні поверхневі шари, які забезпечують нормальні умови експлуатації для трибологічних спряжень деталей. На основі оптимізації вмісту трибологічних присадок отримують оптимальні значення кожного з його компонентів. Оптимізація умови за умови, що кількість зносу має бути до мінімуму, а максимальне навантаження та навантаження зварювання має бути максимальним. На основі експериментальної бази даних на 4-кульковій машині тертя отримують рівняння для кожної із зазначених функцій реагування отриманих ознак, на основі якої зі значенням бажаності порядку 1,0 отримують склад трибологічних присадок : Катеринівські геомодифікатори тертя; олеат натрію, мідний купорос та фосфор TAT 33. Було встановлено, що додавання ТМ-3-18к в оливу трибологічної присадки в кількості 5,75% в лабораторних умовах дозволяє знизити швидкість зносу на 35,1 - 35,5%, максимальне навантаження також збільшується на 17,1 - 17,2%, а зварювальне навантаження збільшується на 5,3 - 8,4%. Аналіз експериментальних даних показує, що цю трибологічну присадку можна експлуатувати на локально завантажених ділянках 1035 Н, а пікове контактне перевантаження становить до 2385 Н. Результати досліджень говорять про те, що запропонована трибологічна присадка дозволяє покращити характеристики трибосистеми. Це може бути корисно для обслуговування під час технічного обслуговування та для виготовлення композиційних олив.Item Фізико-мезомеханічний підхід до виявлення характеру зношування спряжень деталей сільськогосподарської і автотранспортної техніки(ХНУ, 2017) Аулін, В. В.; Лисенко, С. В.; Кузик, О. В.; Жилова, І. В.; Aulin, V.; Lysenko, S.; Kuzyk, О.; Zhylova, I.Розглянуто сутність фізико-мезомеханічного підходу до виявлення характеру зношування спряжень деталей машин. Враховуючи характер фрагментації поверхневого шару деталей, з'ясовано механізм його зношування. Показано, які зміни відбуваються в поверхневому шарі, якщо він зміцнений потоком енергії та нанесенням покриттів, зазначені їх особливості. На прикладі зношування трибоспряжень за різними схемами виявлено кореляцію між інтенсивністю зношування і формуванням вихрової фрагментації мезовихрової структури. З'ясовано, що зміцнена поверхня деталі блокує зародження в її основі мезовихрові структури і цим сприяє зростанню зносостійкості. Сфор-мульовані основні вимоги до критеріїв зміцнення деталей трибоспряжень. Розроблено рекомендації до створення та вибору ефективних технологій зміцнення сільськогосподарської та автотранспортної техніки. The essence of the physico-mesomechanical approach to revealing the nature of wear of mating of machine parts is considered. Taking into account the nature of the fragmentation of the surface layer of the parts, the mechanism of its wear is clarified. It is shown, what changes occur in the surface layer, if it is strengthened by the energy flow and coatings, their features indicated. On the example of wear of tribocides according to various schemes, a correlation was found between the wear rate and the formation of the vortex fragmentation of the mesovortex structure. It was found out that the hardened surface of the part blocks the nucleation in its base of the mesovortical structure and thereby contributes to the increase in wear resistance. The basic requirements to the criteria for strengthening the details of tribo-conjugates are formulated. Recommendations for the creation and selection of effective technologies for hardening agricultural and road transport equipment have been developed.Item Вплив комбінованого модифікування мастильного середовища на зміну режимів тертя в трибоспряженнях деталей(ХНУ, 2013) Аулін, В. В.; Лисенко, С. В.; Кузик, О. В.; Aulin, V.; Lysenko, S.; Kyzik, О.Розглянуто вплив зміни режимів тертя в трибоспряженнях деталей на коефіцієнт тертя робочих поверхонь. Показано можливість керування режимами тертя комбінованим модифікуванням моторної оливи: додавання присадки і обробка електричним або магнітним полем. Виявлено, що на різних режимах тертя змінюються середні значення коефіцієнта тертя. Визначено зміну режиму тертя при різних способах комбінованого модифікування оливи за встановленою залежністю електричного опору шару оливи від критерію Зоммерфельда. It is shown that the change of the modes of friction at tribounits of details substantially influences on the wear of their working surfaces and control by them maybe by means of modification by the electric and magnetic field of both working surfaces of details and motor oil. It is educed, that it is possible to define the mode of friction by the change of current parameters (strength of current, tension), power, electric resistance of motor oil at presence of separate layer of oil between interfaces by surfaces. It is certain that every value of criterion of Sommerfeld is answered by the concrete value of electric resistance, and the combined retrofitting electric resistance diminishes an additive and treatment of oil the electric or magnetic field at the different modes of friction by comparison to electric resistance of the base oil. According of researches, conducted on the machine of friction of 77МТ-1, the curves of Hersi-Shtribeka, it is educed after that, are built, that on the different modes of friction changes mean values of friction coefficient. By the nature changes of electric resistance in an interface "cylinder liner-piston ring" is set that in the moment of stopping of piston at dead centres it is minimum, and in the moment of achievement increases the piston of high speed. It is shown that it is assisted by not only the speed mode but also presence of layer of oil above a piston into that a ring ran at motion with BDC to TDC. In relation to other rings, then, probably, at motion of piston from TDC to BDC of oil ring and lower rings, having reverse taper, took off oil from the walls of shell of cylinder, that weakened the terms of the hydrodynamic mode of friction. The results of researches testify that for a double piston stroke the investigated surfaces co-operate at the different modes of friction: border, mixed and hydrodynamic lubrication. The mode of border friction assists labilizing of surfaces the additive of glycerate of copper in oil, that strengthens the effect of reduction of friction and losses of power. It is educed, that at the combined retrofitting of oil by an additive (сV = 4,0 %) and magnetic field (Н = 2,5∙104 A/м) in the hydrodynamic mode the coefficient of friction diminishes in 1,9 ... 2,3 time; mixed – in 1,1 ... 1,3 time; border – in 1,5 ... 1,8 time. It is set that electric resistance of layer of oil in an interface "cylinder liner-piston ring" in the moment of stopping of piston at "dead centres" minimum, and in the moment of achievement to them to high speed - maximal. It is certain, also, that at motion of piston from BDC to TDC electrical resistance of layer of oil there is more than from TDC to BDC time in 1,5. The change of the mode of friction is experimentally certain after the set dependence of electric resistance of layer of oil on the criterion of Sommerfeld and different methods of the combined modification of oil.