Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
3 results
Search Results
Item type:Item, Дослідження мікрогеометрії поверхонь тертя деталей фрактальним методом(КНТУ, 2009) Аулін, В. В.; Лізунов, С. М.; Aulin, V.; Lizunov, S.В статті мікрогеометрію поверхонь деталей, зміцнених та модифікованих сучасними технологіями, запропоновано досліджувати за допомогою фракталів. Показано, що механічні і сучасні методи обробки робочої поверхні деталей створюють принципово різні елементи топографії. In clause microgeometry of a surface of details, hardening and the updating by modem technologies, is offered to investigate with the help fractals. Is shown, that the mechanical and modem methods of processing of a working surface of details form essentially different elements of topography.Item type:Item, Трибофізичне та фізико-технологічне обґрунтування комбінованого функціонально-спрямованого зміцнення та модифікування деталей і робочих органів СГТ(КНТУ, 2014) Аулін, В. В.; Лисенко, С. В.; Білик, А. П.; Aulin, V.; Lysenko, S.; Bilyk, А.Дано трибофізичне обґрунтування механізму зниження інтенсивності різних видів тертя та зношування деталей і робочих органів сільськогосподарської техніки (СГТ) зміною адгезійних і підвищенням міцнисних властивостей зміцнених та модифікованих шарів з використанням впливу на матеріали лазерного випромінювання (ЛВ). При цьому враховано багатофакторність впливу ЛВ, закономірності формування структурно-фазових станів поверхневих шарів, міжфазних напружень та стимулювання утворення дислокацій та дефектів впакування, підвищення їх щільності та пересичення дефектами міжкристалітних областей, роль мало- і великокутових границь в структуроутвореннях, подрібнення зерен карбідів, оксидів та боридів, збільшення ступеню розчинності легувальних елементів. Виявлено, що механізм зміцнення і модифікування поверхневих структур у полі лазерного випромінювання визначається особливостями фізичних властивостей окремих фазових складових та характером міжфазних взаємодій. Показано, що розв'язання проблеми підвищення зносостійкості деталей і робочих органів СГТ при використанні ЛВ базується на встановленні зв'язків між рівнями його енергетичного впливу та умовами трибомеханічного навантаження в процесі експлуатації. Сформульовано принципи фізико-технологічного обґрунтування функціонально-спрямованого зміцнення та розробки схеми комбінованого зміцнювального впливу на робочі поверхні деталі (робочого органу) СГТ. Для функціонально-спрямованого зміцнення та модифікування розроблені технології та технологічні схеми їх реалізації з використанням ЛВ. Запропонована технологія виготовлення деталей і робочих органів лазерним різанням. Наведені технологічні схеми та результати, що підтверджують ефективність розробленої технології та їх обґрунтування. Given tribophysical justification mechanism reduce the intensity of the different kinds of friction and wear of parts and working elements of agricultural machinery (AM) change and improve the adhesion strength properties of reinforced and modified layers with effects on materials of the laser radiation (LR). Thus considered multifactor impact LR, regularities of structural-phase state of the surface layers, the interfacial stress and stimulate the creation of dislocations and stacking faults, increasing their density and satiety defects intercrystalline regions, the role of small and large angular boundaries in pattern formation, grinding grain carbides, oxides and borides increase the solubility of alloying elements. It is found that the mechanism of strengthening and modification of surface structures in the field of LR is determined by the physical properties of individual phase components and the nature of interfacial interactions. It is shown that the solution of problems of increasing the durability of parts and working elements AM using LR is based on establishing a relationship between the level of its energy impact conditions tribomechanical stress during operation. The principles of physical and technological justification functional-directional reinforcement and development of the scheme combined reinforcing effect on the working surface of the component (working element) AM. For functional-directional reinforcement and modification of developed technologies and technological schemes for their implementation using LR. The proposed technology manufacturing parts and working elements of laser cutting. The technological scheme and the results confirm the efficiency of the technology and their rationale.Item type:Item, Системно-спрямований підхід та синергетична концепція реалізації процесів і станів самоорганізації матеріалів елементів, робочих та технологічних середовищ триботехнічних систем(КНТУ, 2014) Аулін, В. В.; Кузик, О. В.; Aulin, Viktor; Kuzyk, AleksandrВ статті на основі системно-спрямованого підходу та синергетичної концепції з'ясовано реалізацію процесів і станів самоорганізації матеріалів елементів, робочих та технологічних середовищ триботехнічних систем. Визначено сукупність ознак здатності матеріалів до самоорганізації, встановлено їх взаємозв’язок. Розглянуто характер зміни процесів і станів самоорганізації в триботехнічних системах. З'ясовано, що на основі ознак здатності матеріалів елементів, робочих та технологічних середовищ триботехнічних систем можна розробляти більш ефективні технології їх зміцнення, відновлення та модифікування, враховуючи самоорганізуючий характер процесів тертя. In the article on the basis of the system-directed approach and sinergistical conception realization of processes and states of self-organization of materials of elements, working and technological environments of the tribotechnical systems is found out. Totality of signs of ability of materials is certain to self-organization: irreversibility; openness; nonequilibrium; non-linearity; fluctuating; instability; cooperativity and coherentness; dissipativity; complication. Their essence is considered and intercommunication is set. It is shown that totality of the generalized signs of ability of the tribotechnical systems to the different forms of self-organization and condition of their realization is folded tribophysics basis of providing and increase of wearproofness and reliability of their functioning. Character of change of processes and states of self-organization is considered in the tribotechnical systems that is accompanied by evolutional processes. Attention is concentrated and on formation of layer of dissipativitys structures, that come true by a kinetic phase transition basis of that is concert sinergistical co-operation of deformation, thermal, adsorption, diffusive, chemical and other of processes and localization of them in thin-film objects - new structures. It is shown coming from the analysis of mechanisms of kinetic phase transition, that major descriptions of new structures are a degree of efficiency and character of retrofitting. Main in this case there is character of self-organization friction, that is conditioned by the exchange of interfaces of friction with an environment by energy and substance, and also by collective behavior of ions of metal and organic compounds, from that protective tape or coverage is formed. Characteristic is that the formed or inflicted tape, coverage or superficial layer of material, are in the special state peculiar only to the process of friction. A friction can not destroy them, as it recreates them. It is shown that enormous possibilities of decision of practical tasks in the problem of increase of wearproofness of the tribotechnical systems are constrained, mainly, with tribophysics bases of realization of self-organization, with backlogs of triboengineering material science or dynamic material science of elements of the tribotechnical systems and physicochemical of working and technological environments, possibilities of the tribotechnology strengthening, retrofitting and proceeding in details. Certainly, that realization of process of Self-organization allows on a few orders to decrease intensity of wear of tribounit and provide an optimal value to the coefficient of friction, and consequently substantially to promote their wearproofness. It is found out that on the basis of signs of ability of materials of elements, working and technological environments of the tribotechnical systems it is possible to develop more effective technologies their workhardening, renewals and retrofitting, taking into account self-organizated character of processes of friction.