Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
2 results
Search Results
Item type:Item, Модель систем електроприводів деревообробного верстата(КНТУ, 2013) Руденко, Т. Г.; Rudenko, T.У статті дана методика розрахунку моменту навантаження на привод фрези. Запропоновано імітаційну модель, яка дозволяє дослідити реакцію систем електроприводів на зовнішнє збурення у вигляді моменту навантаження. Проведено аналіз осцилограм струму статора асинхронного двигуна приводу фрези і результатів натурного випробування. The purpose of work is analytical determination disturbing influences on the milling drive from cutting unit and comparison reactions the stator current of the model and the real oscillograms during giving static moment. The creating mathematical and simulation models of control objects and studying their response to perturbations is an important step in the design of control systems. This paper presents computation of the mathematical model of the woodworking machines electric drives load. The simulation model was constructed on the basis of the equations using computer software, allowing explore the reaction of electric drives on changes wooden workpieces parameters. The oscillograms of stator current an asynchronous motor of milling cutter, obtained by simulation and by result of natural tests are shown. Thus the model obtained by the proposed method allows determine the load on the cutters drive. Using this load in simulation model of the system causes a change in the stator current engine, similar to the reaction in real drive.Item type:Item, Обґрунтування впровадження системи плавного пуску для привода фрез верстата СФ-АСТРА-РК8(КНТУ, 2012) Єрмолаєв, Ю. О.; Руденко, Т. Г.; Ermolaev, U.; Rudenko, Т.В статті описано моделювання і дослідження пускових процесів привода ріжучого інструмента деревообробного верстата СФ-АСТРА-РК8. Визначені витрати енергії при прямому і плавному пусках, побудовані електродинамічні характеристики струму та моменту при різних вхідних параметрах ТПН, обґрунтовано доцільність використання тиристорних перетворювачів напруги та надані рекомендації щодо вибору управляючих параметрів тиристорних пускозахисних пристроїв для привода ріжучого інструмента верстата СФ-АСТРА-РК8. In the article the modelling and analysis starting processes of cutting tool drive wood-working machine SF-ASTRA-RK8 are described. The losses of energy at the direct and soft starting are defined, the electrodynamic descriptions of current and moment are built at the different entry parameters of TPN, the expedience of the use thyristor tension transformers is justified and the recommendations on the choice of managing parameters of thyristor soft start devices for the cutting tool drive machine tool SF-ASTRA-RK8 are gave.