Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
2 results
Search Results
Item type:Item, Розмірна обробка електричною дугою бічної поверхні напрямного ролика з композиційного матеріалу на основі реліту(ЦНТУ, 2018) Сіса, О. Ф.; Пукалов, В. В.; Свяцький, В. В.; Сиса, О. Ф.; Свяцкий, В. В.; Sisa, O.; Pukalov, V.; Sviatskyi, V.Виконано обґрунтування технологічної схеми формоутворення зовнішньої бічної поверхні напрямного ролика, способом розмірної обробки електричною дугою з урахуванням особливостей фізичних механізмів їх утворення та гідродинамічних явищ в міжелектродному проміжку. Встановлені аналітичні зв’язки технологічних характеристик процесу розмірної обробки електричною дугою твердого сплаву «Реліт» з режимами обробки і геометричними параметрами. Выполнено обоснование технологической схемы формообразования внешней боковой поверхности направляющего ролика, способом размерной обработки электрической дугой с учетом особенностей физического механизма образования и гидродинамических явлений в межэлектродном промежутке. Установлены аналитические связи технологических характеристик процесса размерной обработки электрической дугой твердого сплава «Релит» с режимами обработки и геометрическими параметрами. The article is dedicated to development of technology and equipment of rough machining method by electric arc of a guide roller side surface, as high performance alternative to traditional methods of rough machining. During operation, the damage to the surface of the hard alloys guide roller caliber occurs by abrasion and chipping of carbide particles. The development of net shaped roll marks occurs by the occurrence of hotbeds of accelerated cluster abrasion and chipping of smaller particles with subsequent growth of these areas and unification in a closed net shaped roll marks. The turned out particles of hard alloy leave the machining marks on the wire, in such a worn the hard alloy rolling roller does not meet the specified dimensions and it is reground to a smaller diameter by grinding of diamond tool on the rough machining stage. It is proposed on the stage of rough machining to remove the worn-out profile of a guide roller side surface with help of dimensional electric arc, which allows you to remove big allowances of material at the lowest treatment costs. It is suggested to get the lateral surface by dimensional electric arc with a given roughness of Ra = 10..20mkm, which allows you to take great allowances material at the lowest cost processing time.In this case, the processing cycle of hard alloy side surface decreased of 1,4…2,6 times. The justification of technical scheme of forming the guide roller side surface by electric arc sizing method is done taking into account features of physical formatting mechanism and hydrodynamic phenomena in the electrode gap. The analytical communication of technological characteristics of rough machining process by electric arc made of composite material, based on relit, with the modes of processing and geometric parameters are established. The obtained models allow to control the productivity and specific productivity, specific electricity consumption, quality and surface accuracy which is processed, predicted and optimized given characteristics. A technical solution is proposed that allows to expand the technological possibilities of processing the guide roller.Item type:Item, Технологія виготовлення зовнішньої бічної поверхні катків гранулятора(ЦНТУ, 2017) Сіса, О. Ф.; Пукалов, В. В.; Кислюк, О. В.; Sisa, О.; Pukalov, V.; Kislyuk, О.Виконано обґрунтування технологічної схеми формоутворення зовнішньої бічної поверхні катка гранулятора, способом розмірної обробки електричною дугою з урахуванням особливостей фізичних механізмів їх утворення та гідродинамічних явищ в міжелектродному проміжку. Встановлені аналітичні зв’язки технологічних характеристик процесу розмірної обробки електричною дугою сталі ШХ15СГ з режимами обробки і геометричними параметрами. The article is dedicated to the development of technology and equipment a roller of granulators processing with dimensional electric arc as high-performance alternative to traditional methods of processing. It is suggested to get the lateral surface by dimensional electric arc with a given roughness of Ra = 6,3..22mkm, which allows you to take great allowances material at the lowest cost processing time. In such a case the cycle of matrix processing decreases in 4,1-8,2 times. The objectivity of technological schema the roller of a granulator by the method of dimensional processing by electric arc with consideration of specialties of physical mechanism of creation and hydrodynamic phenomena in electrode period was performed. The analytical connections of technological processing characteristics of sized processing by electrical arc of steel SHH15SG were established, with the modes of processing and geometrical parameters.