Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
16 results
Search Results
Item type:Item, Теоретико-методичні засади підвищення ефективності використання парку машин в регіональних транспортних системах та підприємствах на основі лізингових відносин(ЦНТУ, 2023) Аулін, В. В.; Ляшук, О. Л.; Гриньків, А. В.; Лисенко, С. В.; Гудь, В. З.; Тесля, В. О.; Aulin, V.; Liashuk, O.; Hrinkiv, А.; Lysenko, S.; Hud, V.; Teslia, V.В даній роботі розглядається проблема технічної та економічної ефективності придбання нових транспортних машин автотранспортними підприємствами регіону купівлею та за допомогою лізингових відносин з метою підвищення їх продуктивності і працездатності. Показано, що є необхідність у створенні теоретико-методичних засад лізингу транспортних машин, як одного із способів переоснащення системи машин в регіонах України та підвищення ефективності їх використання на основі лізингових відносин. Обґрунтовано, що при розробці засад доцільно базуватися на системі підвищення технічного стану машин відповідною стратегією їх технічного обслуговування і ремонту. Побудовано структурну схему системи транспортних машин регіону та автотранспортних підприємств, які мають модульну структуру рухомого складу. This work examines the problem of technical and economic efficiency of purchasing new transport vehicles by motor vehicle enterprises of the region by purchase and with the help of leasing relations in order to increase their productivity and efficiency. It is shown that there is a need to create the theoretical and methodological foundations of the leasing of transport vehicles, as one of the ways to re-equip the system of vehicles in the regions of Ukraine and increase the efficiency of their use on the basis of leasing relations. It is substantiated that when developing the foundations, it is expedient to base the system on improving the technical condition of machines with the appropriate strategy of their maintenance and repair. A structural diagram of the system of transport vehicles of the region and motor transport enterprises, which have a modular structure of rolling stock, was built. The main tasks in the development of issues of new leasing relations are outlined. When determining the number of leasing objects, the matrix of the system of technical effects of operations was used, according to the strategy of maintenance and repair of transport vehicles. When creating the theoretical and methodological foundations of the technical and economic efficiency of leasing, the costs for the implementation of maintenance and repair operations of transport vehicles were considered. It is noted that when leasing, it is important to assess the technical condition of transport vehicles by diagnosing them. The work defines the conditions under which it is expedient to develop leasing relations and when motor vehicle enterprises simply buy new vehicles. The sequence of the assessment of the corresponding costs is shown.Item type:Item, Justification of the level of competition on urban passenger routes(ЦНТУ, 2022) Aulin, V.; Holub, D.; Hrinkiv, A.; Lysenko, S.; Riabtsev, N.; Аулін, В. В.; Голуб, Д. В.; Гриньків, А. В.; Лисенко, С. В.; Рябцев, Н. О.The components of the market competition of carriers on passenger transport routes of the city transport system are considered. It is shown that the demand for transportation can be presented in the form of matrices of passenger correspondence. Due to its fluctuations within some limits, the main issue is its distribution among the routes that form the urban route network. The essence of the level of competition between carriers, which has a growing tendency, has been revealed. It is proposed to use the Likert method and the results of a sociological survey to build a model of the attractiveness of routes as its assessment. The utility function of the route, the optimization function of Lagrange and the model of the choice of the passenger movement path were constructed. It is taken into account that transport enterprises operate in break-even conditions, and profit is a limitation when solving the task of improving the quality of public service. В данній роботі теоретично обґрунтувано врахування рівня конкуренції між перевізниками на міських пасажирських маршрутах при забезпеченні якісного транспортного обслуговування транспортних засобів та рентабельності обслуговування транспортних підприємств. На прикладі м. Кропивницького розглянуто складові ринкової конкуренції перевізників на маршрутах пасажирських перевезень міської транспортної системи. Показано, що попит на перевезення можливо представити у вигляді матриць пасажирських кореспонденцій. Через його коливання у деяких межах, основним питанням є його розподіл між маршрутами, які формують міську маршрутну мережу. Показано, що в ринкових умовах в межах вирішення питання підвищення якості транспортного обслуговування населення враховується шляхом формалізації співвідношення між попитом і пропозицією. Виявлено, що на взаємодію попиту і пропозиції певні обмеження накладає тарифікація на міські пасажирські перевезення. Отримано вираз для критерію рівня конкуренції, виходячи із співвідношення попитом і пропозицією на міські пасажирські перевезення. Виявлено сутність рівня конкуренції між перевізниками, який має тенденцію до зростання. Запропоновано в якості його оцінки застосовувати метод Лайкерта і результати соціологічного обстеження для побудови моделі привабливості маршрутів. Показано, що рівень конкурентної боротьби між перевізниками впливає на якість обслуговування населення на міських пасажирських маршрутах. Запропоновано вираз для оцінки цього показника. Визначено, що рівень конкуренції між перевізниками знаходиться в зворотно- пропорційній залежності з рівня якості транспортного обслуговування населення. Побудовано функцію корисності маршруту, оптимізаційну функцію Лагранджа та модель вибору шляху пересування пасажирів. Враховано, що транспортні підприємства функціонують в умовах беззбитковості, а прибуток виступає обмеженням при вирішені завдання підвищення якості обслуговування населення. При обстеженні пасажирської транспортної мережі м. Кропивницького була проведена оцінка якості транспортного обслуговування за такими характеристиками: тарифу на перевезення, часу поїздки, ступеню наповнення салону транспортних засобів. По результатах соціологічного обстеження розраховано коефіцієнт кореляції для кожного із зазначених факторів, які відповідно рівні: 0,679; 0,685; 0,933. Виявлено, що найбільш значущим фактором є динамічний коефіцієнт заповнення салону транспортного засобу.Item type:Item, Підвищення ефективності використання транспортних машин у агропромисловому виробництві узгодженням їх експлуатаційних характеристик та умов функціонування(ЦНТУ, 2022) Аулін, В. В.; Гриньків, А. В.; Лисенко, С. В.; Голуб, Д. В.; Лівіцький, О. М.; Aulin, V.; Hrinkiv, А.; Lysenko, S.; Holub, D.; Livitskyi, O.В даній роботі розглянуто питання підвищення ефективності використання транспортних машин у агропромисловому виробництві узгодженням їх експлуатаційних характеристик та умов функціонування. Запропоновано підхід узгодження експлуатаційних характеристик машин з умовами функціонування, який базується на структурній та імітаційних моделях системи "транспортна машина- умови її функціонування". Пропонується ітераційне рішення імітаційної моделі з пошуком оптимальних параметрів. В якості інтегрального критерію ефективності використання транспортної машини на підприємстві агропромислового виробництва взято питому витрату палива на здійснення транспортної роботи. Специфічність умов експлуатації транспортних машин запропоновано характеризувати коефіцієнтом узгодженості, який відображає вплив умов функціонування на питому витрату палив при транспортних роботах. Узгодження характеристик транспортних машин з умовами функціонування, обґрунтування їх оптимальних конструкційних параметрів, проводили підбором параметрів трансмісії, що забезпечують покращення умов частковим демпфіруванням коливань навантаження. Представлені результати параметрів демпфіруючого вузла трансмісії автомобіля КамАЗ-4308 для різних режимів руху. Для цих умов проведені базові, теоретичні, експериментальні оцінки коефіцієнта узгодженості, а також дано рекомендовані режими руху транспортних машин при вивезенні зернових від комбайна для автомобілів КамАЗ-4308 та тракторних агрегатів МТЗ-82+2ПТС4. This paper examines the issue of increasing the efficiency of the use of transport vehicles in agroindustrial production by harmonizing their operational characteristics and operating conditions. The approach of matching the operational characteristics of machines with the conditions of operation is proposed, which is based on structural and simulation models of the "transport machine-conditions of its operation" system. An iterative solution of the simulation model with the search for optimal parameters is proposed. The specific fuel consumption for carrying out transport work is taken as an integral criterion for the efficiency of the use of a transport vehicle at an agro-industrial production enterprise. The specificity of the operating conditions of transport vehicles is proposed to be characterized by the consistency coefficient, which reflects the influence of operating conditions on the specific fuel consumption during transport operations. This coefficient takes into account the influence of the characteristics of the engine, cargo and external load. the corresponding system of equations is given as a mathematical model, which was supplemented with auxiliary dependencies that determine the boundary conditions of the operation of individual subsystems of transport machines, their control conditions and transitions of the model from a dynamic state based on a simulation model, the characteristics of machines and their structural elements in time are calculated for cases of partial high-speed and loading modes and transitions between them. Matching the characteristics of transport vehicles with the operating conditions, justifying their optimal design parameters, was carried out by selecting the transmission parameters, which ensure the improvement of conditions by partial damping of load fluctuations. The results of the parameters of the damping assembly of the transmission of the KamAZ-4308 car for different driving modes are presented. For these conditions, basic, theoretical, and experimental evaluations of the consistency coefficient were carried out, as well as recommended driving modes of transport vehicles when removing grain from the КамАЗ-4308 combine for cars and МТЗ-82+2ПТС4 tractor units.Item type:Item, Вплив трибологічної ефективності ресурсовизначальних спряжень деталей трансмісії на експлуатаційну надійність транспортних машин(ЦНТУ, 2022) Лисенко, С. В.; Lysenko, S.В даній роботі розглянуто умови трибологічної ефективності спряжень дисків трансмісії ТМ, як ресурсовизначальних деталей та її вплив на експлуатаційну надійність машин. Обґрунтовано зміну гідродинамічного тертя, витрат оливи, виносна здатність оливи обертовими дисками як в ламінарному, так і турбулентному режимах потоку трансмісійної оливи. Розглянуто характер скидання оливи з робочої поверхні диска в ламінарному та турбулентному режимах. Обґрунтована залежність моменту гідродинамічного опору від ряду впливових параметрів, а також відносного моменту опору у мультиплікативному модельному представленні через критеріальні безрозмірні комплекси. З'ясована сукупність процесів, що протікають в трибоспряженні дисків в залежності від кутової швидкості їх обертання за виділеними п'ятьма зонами. Показано, що ефективність і надійність трансмісії ТМ залежить від сумарної сили тертя, що діє на трибоспряження дисків, навантаження та умов роботи. This work examines the conditions of tribological efficiency of couplings of TM transmission discs as resource-determining parts and its influence on the operational reliability of machines. The change in hydrodynamic friction, oil consumption, oil carrying capacity by rotating disks in both laminar and turbulent modes of transmission oil flow is substantiated. The nature of oil discharge from the working surface of the disk in laminar and turbulent modes is considered. Based on the system of the Navier-Stokes equation, the change in the effective characteristics of the coupled transmission discs is substantiated: carrying capacity and oil consumption. The nature of oil discharge from the working surface of the transmission disc is considered, taking into account the friction forces and inertia forces. The dependence of the moment of hydrodynamic resistance on a number of parameters, as well as the relative moment of resistance on the Reynolds and Froude criteria, was investigated as the efficiency of the coupled discs of the transmission of transport vehicles. A qualitative graphical dependence of the moment of hydrodynamic resistance of tribocouplers of disks on the angular speed of their rotation is constructed, with the selection of characteristic zones, and a description of the physical picture of the processes in them is given. The well-founded dependence of the moment of hydrodynamic resistance on a number of influencing parameters, as well as the relative moment of resistance in the multiplicative model representation through criterion dimensionless complexes. The set of processes occurring in the tribo-coupling of disks depending on the angular speed of their rotation in five selected zones has been clarified. It is shown that the efficiency and reliability of the TM transmission depends on the total frictional force acting on the tribo-coupling of the discs, load and operating conditions.Item type:Item, Дослідження безпеки дорожнього руху на автошляхах(ЦНТУ, 2022) Ляшук, О. Л.; Цьонь, О. П.; Дзюра, В. О.; Бабій, М. В.; Кристопчук, М. Є.; Лисенко, С. В.; Бодоряк, Ю. Д.; Lyashuk, О.; Tson, O.; Dzyura, V.; Babii, М.; Krystopchuk, M.; Lysenko, S.; Bodoriak, Yu.Проаналізовано показники безпеки дорожнього руху на автошляхах України, на прикладі Тернопільської області. Встановлено, що на даний час у світі дорожньо-транспортні пригоди являються однією із основних причин смертності та інвалідності людей, та створюють щорічні втрати ВВП у розмірі від 1 до 3%. Досліджено, що за січень – липень 2021 року на вулично-дорожній мережі Тернопільської області зареєстровано 1509 дорожньо-транспортних пригод, що на 19% більше ніж за аналогічний період минулого року (2020 рік – 1271 ДТП). Запропоновано організаційні заходи для підвищення безпеки руху на вулично-дорожній мережі. The indicators of road safety on the roads of Ukraine, on the example of Ternopil region are analyzed. It is established that currently in the world road accidents are one of the main causes of death and disability, and create annual GDP losses of 1 to 3%. It is investigated that for January - July 2021 on the street and road network of Ternopil region 1509 road accidents were registered, which is 19% more than for the same period last year (2020 - 1271 accidents). Organizational measures to improve traffic safety on the road network are proposed. Measures to improve traffic safety on the city's road network are divided into three main areas. The first direction was to organize traffic directly on the road network, the second - in the development of public transport and giving priority to travel. From the point of view of traffic safety, the construction of plans for coordination of traffic light facilities taking into account the movement of public transport can be an acceptable method. The third direction is the direct informational impact on drivers of vehicles.Item type:Item, Системно-спрямований підхід підвищення експлуатаційної надійності транспортних машин на етапах їх життєвого циклу(ЦНТУ, 2022) Лисенко, С. В.; Lysenko, S.В роботі на основі системно-спрямованого підходу визначено, як на етапах життєвого циклу транспортних машин, що працюють у відкритих кар'єрах та в умовах агропромислового виробництва, підвищити рівень їх експлуатаційної надійності. На етапі пуску силових агрегатів запропоновано спосіб зменшення зносу спряжень деталей. Розроблено схему реалізацію способу. Визначено, що ефективно цей спосіб застосувати при експлуатації транспортних машин в жорстких нестаціонарних умовах та режимах "пуск-зупинка". Експериментально доведено, що запропонований спосіб дає можливість економити до 15% експлуатаційні матеріали та збільшувати термін заміни моторної оливи. На етапі експлуатації транспортних машин у відкритому кар'єрі і умовах агропромислового виробництва дослідженнями доведено подовження використання моторної та трансмісійної оливи на 25...40%, виявлено зменшення кількості технічних обслуговувань та необхідність коректування термінів технічних обслуговувань транспортних машин. The paper, based on a system-oriented approach, identifies how to increase the level of their operational reliability at the stages of the life cycle of transport machines operating in open pits and in the conditions of agro-industrial production. At the start-up stage of power units, a method of reducing the wear of parts is proposed. The scheme of realization of a way is developed. It is determined that it is effective to use this method when operating vehicles in harsh non-stationary conditions and "start-stop" modes. It is experimentally proven that the proposed method allows to save up to 15% of consumables and increase the life of the engine oil. The study of the effectiveness of the use of additives NIOD-5, RoilGold and the proposed additive KGMT-1 to motor oil was carried out at the stage of bench tests of power units of transport vehicles. It has been determined that the addition of a composite additive to the engine oil provides a steady increase in power, torque and reduction of specific fuel consumption. RoilGold and KGMT-1 additives work especially effectively. At the stage of operation of transport vehicles in open quarries and conditions of agro-industrial production, research proved the extension of the use of motor and transmission oil by 25 ... 40%, revealed a decrease in maintenance and the need to adjust the maintenance of vehicles. Based on the results of operational studies, a corrective table of terms of replacement of motor oil of transport vehicles operating in harsh non-stationary conditions is constructed. It is found out how to ensure the proper level of operational reliability of transport vehicles.Item type:Item, Закономірності впливу високомодульних наповнювачів на розподіл полів напружень в поверхневих шарах деталей машин, виготовлених з полімерних композитних матеріалів(ЦНТУ, 2022) Аулін, В. В.; Гриньків, А. В.; Лисенко, С. В.; Лівіцький, О. М.; Бабій, А. В.; Aulin, V.; Hrinkiv, A.; Lysenko, S.; Livitskyi, O.; Babii, А.В даній роботі на основі комп'ютерного моделювання контактної взаємодії спряжень зразків (деталей), навантажених тертям, виявлено основні зміни розподілу полів напружень в контактних областях гомогенних і гетерогенних (композитних) полімерних матеріалів. Поля напруження досліджували як в статичних, так і динамічних умовах навантаження. Увага була зосереджена на виявлення областей з максимальним тангенціальним напруження , їх конфігурації та глибини залягання. При цьому була використана теорія N.P. Suh, яка стосується зародження руйнуючих процесів в матеріалах зразків і деталей, ініційована наявністю зон дії максимальних тангенціальних напружень на певній глибині поверхневого шару. Запропоновано критерій, що відповідає оптимальному об'ємному вмісту високомодульному наповнювача, який дорівнює відношенню усереднених відстань між центрами сусідніх частинок наповнювача і їх розміру. Наведені відповідні оцінки цього критерію. In this paper, based on computer simulation of contact interaction of conjugations of samples (parts) loaded with friction, the main changes in the distribution of stress fields in the contact regions of homogeneous and heterogeneous (composite) polymeric materials are revealed. Stress fields were investigated under both static and dynamic load conditions. The focus was on identifying areas with maximum tangential stresses , their configuration and depth. The theory of N.P. Suh, which concerns the origin of destructive processes in the materials of samples and parts, is initiated by the presence of zones of maximum tangential stresses at a certain depth of the surface layer. In the homogeneous polymeric material, four stress regions are detected: in the contact region ; the contact area ; in the field of aggregate contacts ; in the area between the aggregate contacts . It is shown that in the relative motion of the conjugations of the samples (parts) the depth of the local areas and , where reaches the highest value and these areas remain in place, and areas and are mixed in operation closer to the surface. The change of configurations of these areas in the process of relative motion of conjugations of samples (details) is also revealed. In the heterogeneous (composite) polymeric material with high-modulus fillers, three local areas were identified: in the filler ; between the fillers ; under the filler . It is determined that the contact load in the polymer composite material is transmitted through high-modulus fillers and is determined by their geometry and relative position. Significant danger is posed by cases when areas and are located at the same level from the surface of the sample (part), which can cause chipping of the filler. It is shown that the most effective is the operation of the part when the area is located deeper than . A criterion corresponding to the optimal volume content of high modulus filler, which is equal to the ratio of the average distance between centers of adjacent filler particles and their size. Relevant estimates of this criterion are given.Item type:Item, Енергоефективність заправки автомобільного транспорту стиснутим природним газом при використанні газогідратного акумулятора(ЦНТУ, 2021) Клименко, В. В.; Босий, М. В.; Аулін, В. В.; Філімоніхіна, І. І.; Лисенко, С. В.; Гриньків, А. В.; Klymenko, V.; Bosiy, M.; Aulin, V.; Filimonikhina, I.; Lysenko, S.; Hrynkiv, A.В роботі запропоновано схемно-конструктивне рішення заправки стиснутим природним газом в АГНКС з газогідратним акумулятором (АГНКС-ГА) та описано прицип її дії на конкретному прикладі. Показано, що в АГНКС-ГА з 4-ма ступенями компримування і акумуляторами стиснутого газу АСГ газ з ГА до АСГ рухається в з’єднувальному трубопроводі при адіабатних умовах з докритичною швидкістю, тобто менше, ніж швидкість звуку, оскільки відношення тисків більше критичного. Для характеристики енергоефективності заправки автомобільного транспорту стиснутим природним газом в АГНКС-ГА запропоновано використовувати коефіцієнт корисної дії заправки (ККД). За результатами розрахунків показано, що енергоефективність заправки автомобільного транспорту стиснутим природним газом в АГНКС-ГА вище на 6%, ніж в традиційній АГНКС для тих же умов: відповідні значення коефіцієнтів корисної дії заправки = 0,47 і ηзапр= 0,41. Обгрунтовано можливість використання АГНКС-ГА для заправки пересувних автомобільних газових заправників (ПАГЗ) без застосування додаткового компресорного обладнання. The article briefly describes the processes carried out during the operation of the gas hydrate accumulator (GHA) at the automobile gas-filling compressor station (AGCS): formation of natural gas hydrates, their accumulation and storage, and melting with the release of natural gas at high-pressure р = 25MPa, sufficient for full refueling gas cylinders. The circuit-constructive solution of filling with compressed natural gas in AGCS-GHA is offered, and the principle of its work is described in a good example. It is shown that during AGCS-GHA operation with four compression stages and ACG compressed gas accumulators, the gas from GHA to ASG moves in the connecting pipeline at adiabatic conditions at subcritical speed, i.e., below the speed of sound, because the pressure ratio рASG / рGHA coefficient is more critical. Calculations performed for these conditions by thermodynamic equations of gas flow in the subcritical mode of motion, without losses, showed that the velocity in a pipe with a diameter of d = 15 mm has a value of w = 793 m / s. This will ensure a specific gas supply from GHA to ASG at the level of m = 0.178 kg / s. It is proposed to use the coefficient efficiency of refueling to characterize the energy efficiency of refueling vehicles with compressed natural gas in AGCS-GHA. According to the results of calculations, it is evident that the energy efficiency of refueling vehicles with compressed natural gas in AGCS-GHA is 6% higher than in traditional AGCS at the same conditions: the corresponding values of coefficient refueling efficiency = 0.47 and = 0.41. The article also illustrates that in the process of melting gas hydrates in GHA at a temperature of t = 26-28 0C, one can get compressed natural gas at a pressure of р = 30-35 MPa, which will use AGCS-GHA without additional compressor equipment for refueling mobile gas stations (PAGZ), in which the optimal values of the maximum pressure are in the range of 32-35 MPa.Item type:Item, Теоретичне обґрунтування управління функціонуванням технічними та транспортними системами на основі методів системної теорії інформації(ЦНТУ, 2021) Аулін, В. В.; Гриньків, А. В.; Лисенко, С. В.; Лівіцький, О. М.; Чернай, А. Є.; Голуб, Д. В.; Головатий, А. О.; Aulin, V.; Grinkiv, A.; Lysenko, S.; Livitskyi, O.; Chernai, A.; Holub, D.; Holovatyi, A.В роботі з теоретичної точки зору обґрунтовано управління функціонуванням транспортних та експлуатацією технічних систем на основі методу системної теорії інформації. Пропонується вектор та матриця стану на основі діагностичної інформації та чутливості впливу діагностичних параметрів на стан транспортних або технічних систем. Властивості сенситивності (чутливості) відображені на основі класичних та узагальнених інформаційних формул А. Харкевича, К. Шеннона, Р. Хартлі. Використані коефіцієнти квантовості (емерджентності) інформації за виразами Шеннона-Харкевича і Хартлі, враховано рівень складності змінених станів системи управління. Розроблено універсальний чисельний метод і інструментарій до нього, що дозволяє проводити інформаційні розрахунки на основі діагностичних даних стану досліджуваних об'єктів. Розглянуто рівень системної організації транспортних і технічних систем й управління ними як активними об'єктами. Визначено, що семантична інформаційна модель дозволяє при малих вибірках та співставленості часткових критеріїв добре обґрунтувати інтерпретації розпізнавання станів об'єкта, розроблених по векторам їх класів. Виявлено поведінку систем, коли вони повністю детерміновані і повністю випадкові, що важливо при прогнозуванні їх стану. In the work from the theoretical point of view the management of functioning of transport and operation of technical systems on the basis of a method of the system theory of information is substantiated. The state vector and matrix on the basis of diagnostic information and sensitivity of influence of diagnostic parameters on a condition of transport or technical systems are offered. The properties of sensitivity (sensitivity) are reflected on the basis of classical and generalized information formulas of A. Kharkevich, K. Shannon, R. Hartley. The coefficients of quantum (emergence) of information according to the expressions of Shannon-Kharkevich and Hartley are used, the level of complexity of the changed states of the control system is taken into account. The scheme of connections of classical and generalized formulas which reflect functions of density of the diagnostic information on a condition of technical and transport systems is constructed. A universal numerical method and tools for it have been developed, which allows to perform information calculations on the basis of diagnostic data of the state of the studied objects. Numerical calculation refers to the sensitivity of the state (sensitivity factor) of technical and transport systems. The level of system organization of transport and technical systems and their management as active objects is considered. It is noted that the principle of correspondence is fulfilled, which is mandatory for a more general information theory. The system modification is implemented using the Hartley formula, and the modification in the classical case is the Kharkevich formula. It is determined that the semantic information model allows for small samples and comparison of partial criteria to well substantiate the interpretations of object state recognition, developed by the vectors of their classes. It is revealed that the semantic information model combines the advantages of meaningful and statistical models created for the implementation of the automated system of cognitive analysis of transport and technical systems. The behavior of systems is revealed when they are completely deterministic and completely random, which is important in predicting their state.Item type:Item, Вплив процесів, що відбуваються в рухомих спряженнях деталей транспортних машин під дією компонентів геомодифікатора, на ефективність триботехнологій припрацювання і відновлення(ЦНТУ, 2020) Аулін, В. В.; Лисенко, С. В.; Гриньків, А. В.; Чернай, А. Є.; Слонь, В. В.; Лукашук, А. П.; Aulin, V.; Lysenko, S.; Grinkiv, A.; Chernai, A.; Slon, V.; Lukashuk, A.; Аулин, В. В.; Лысенко, С. В.; Гринькив, А. В.; Чернай, А. Е.Показано, що ефективність реалізації триботехнологій припрацювання і відновлення систем і агрегатів транспортних машин залежить від підготовки робочого середовища в якому відбувається припрацювання трибоспряжень деталей. Розглянуто властивості основних компонентів геомодифікатора КГМТ-1: SiO2, MgO, Al2O3, Fe2O3. Обґрунтована їх активізація при подрібненні та подачі в зону тертя, реалізацію станів і процесів самоорганізації. З'ясовано умови формування захисних покриттів на робочих поверхнях деталей. Виявлено, що для матеріалів компонентів геомодифікатора КГМТ-1 з сильно гомеополярними зв'язками, таких як SiO2, SiC та алюмосилікатний мінерал каолініт, спостерігається процес аморфізації, фазового перетворення α-Si-k-Si. Показано як фізичні процеси обумовлюють протікання трибохімічних реакцій і формування захисних покриттів. It is shown that the effectiveness of the implementation of tribotechnologies for running-in and restoration of systems and assemblies of transport machines depends on the preparation of the working environment in which the running-in of tribocouplings of parts takes place. When using a geomodifier to add to engine and transmission oil, it is important to refine the particles of its components and obtain special properties of their surfaces. The properties of the main components of the KGMT-1 geomodifier: SiO2, MgO, Al2O3, Fe2O3 are considered. Their activation during grinding and feeding into the friction zone is substantiated. The change in the size of the particles of the components of the geomodifier on the duration of the test under various operating conditions and within the limits of the strength intervals was investigated. The course of various physical processes according to nonequilibrium thermodynamics and the realization of states and processes of self-organization are considered. It was found that, depending on the degree of fragmentation, the particles of the components exhibit different activity, and therefore, different conditions for the formation of protective coatings on the working surfaces of parts and tribomechanical and tribophysical effects on particles are realized. It is shown that the latter manifests itself during the formation of defects, specific surface area, and duration of mechanical activation. It was revealed that for the materials of the KGMT-1 geomodifier components with strongly homeopolar bonds, such as SiO2, SiC, and the aluminosilicate mineral kaolinite, an amorphization process is observed. The influence of the α-Si-k-Si phase transformation in the materials of the KGMT-1 additive on the efficiency of the implementation of tribotechnologies has been determined. It is shown how physical processes in a composite oil cause tribochemical reactions and formation of coatings on the working surfaces of interfaces of parts of systems and aggregates of transport machines. Показано, что эффективность реализации триботехнологий приработки и восстановления систем и агрегатов транспортных машин зависит от подготовки рабочей среды в котором происходит приработка трибосопряжений деталей. Рассмотрены свойства основных компонентов геомодификатора КГМТ-1: SiO2, MgO, Al2O3, Fe2O3. Обоснован их активизация при измельчении и подачи в зону трения, реализацию состояний и процессов самоорганизации. Выяснены условия формирования защитных покрытий на рабочих поверхностях деталей. Выявлено, что для материалов компонентов геомодификатора КГМТ-1 с сильно гомеополярными связями, таких как SiO2, SiC и алюмосиликатный минерал каолинит, наблюдается процесс аморфизации, фазового превращения α-Si-k-Si. Показано как физические процессы обуславливают протекание трибохимических реакций и формирования защитных покрытий.