Збірники наукових праць ЦНТУ
Постійне посилання на фондhttps://dspace.kntu.kr.ua/handle/123456789/1
Перегляд
13 результатів
Результати пошуку
Тип:Документ, Дослідження рухових можливостей кінематичних ланок МПС при формоутворюючих рухах осьовим інструментом(ЦНТУ, 2025) Вахніченко, Д. В.; Годунко, М. О.; Писанка, С. В.; Vakhnichenko, D.; Hodunko, M.; Pysanka, S.В статті виконано кінематичний аналіз формоутворюючих рухів верстату з механізмом паралельної структури (МПС) при виконанні типових технологічних операцій. Розглянуто математичну модель верстату типу «гексапод» при виконанні даних операцій, таких як свердління та фрезерування. Досліджено рухові можливостей кінематичних ланок МПС при лінійних, площинних та просторових формоутворюючих рухах. Визначено залежності між координатними рухами інструменту в процесі обробки та зміною довжини кінематичних ланок МПС. Any proposed design of a machine with parallel kinematics machine (PKM) requires justification of the choice of design parameters and technical characteristics for the further implementation of this equipment in production. Since the coordinate movements of the executive body for the implementation of the technological operation associated with the processing of parts are performed by kinematic links, the indicator of the motor capabilities of the kinematic links of the PKM during the shaping process was investigated. To carry out research in the MathCad, a general mathematical model of the design of a machine with PKM. First of all, boring and drilling schemes are considered, in which the tool moves along one or more coordinates simultaneously. Then, processing according to technological schemes with complex tool motion trajectories is considered, milling in a plane according to the technological schemes: along an astroid, along an Archimedean spiral, along an elongated cycloid and along an epicycloid. The change in the length of kinematic links during typical technological movements in space is considered according to the processing schemes along a cylindrical and conical helical line etc.Тип:Документ, Дослідження впливу конструктивних параметрів механізму паралельної структури на функціональні можливості верстата з паралельною кінематикою(КНТУ, 2008) Павленко, І. І.; Валявський, І. А.В статті досліджується вплив конструктивних параметрів механізму паралельної структури на функціональні можливості верстата з паралельною кінематикою. Influence of structural parameters of parallel structure mechanism on hexapod functional possibilities in the article.Тип:Документ, Визначення конструктивних параметрів ВПК при виконанні типових рухів свердління(КНТУ, 2011) Павленко, І. І.; Вахніченко, Д. В.; Pavlenko, I.; Vakhnichenko, D.В статті визначаються конструктивних параметри верстатів з паралельною кінематикою при виконанні типових технологічних рухів механізмів з паралельною кінематикою. In article design data of machine with parallel kinematics are defined at performance of typical technological movements of the mechanism tool with parallel kinematics.Тип:Документ, Особливості модульної будови верстатів з паралельною кінематикою(КНТУ, 2010) Павленко, І. І.; Валявський, І. А.; Pavlenko, I.; Valyavsky, I.В статті розглянуто особливості модульної будови верстатів з паралельною кінематикою, основні модулі, запропоновано регламентацію конструктивних параметрів з‘єднувальних фланців кінематичних ланок, несучої системи та виконавчого органу верстатів з паралельною кінематикою. In article features of a modular structure of machine tools with parallel kinematics are considered, it is offered a regulation of design data of the kinematic links connecting flanges, bearing system and an executive office of machine tools with parallel kinematics.Тип:Документ, Тенденції розвитку обладнання з механізмами паралельної структури(КНТУ, 2012) Павленко, І. І.; Вахніченко, Д. В.; Костюк, Є. С.; Кропівний, В. М.; Pavlenko, I.; Vakhnichenko, D.; Kostyuk, E.; Kropivniy, V.В статті досліджуються тенденції сучасного розвитку верстатів з механізмами паралельної структури в високорозвинених країнах світу, в країнах СНД та в Україні зокрема. The article investigates the trends of modern development tools with the mechanisms of parallel structures in highly developed countries, CIS countries, including Ukraine.Тип:Документ, Дослідження впливу конструктивних параметрів на зміну кутів в опорах у ВПК(КНТУ, 2011) Павленко, І. І.; Вахніченко, Д. В.; Годунко, М. О.; Pavlenko, I.; Vakhnichenko, D.В статті досліджується вплив конструктивних параметрів механізмів з паралельною кінематикою на функціональні можливості верстатів з паралельною кінематикою. Influence of structural parameters of parallel structure mechanism on hexapod functional possibilities in the article.Тип:Документ, Кінематичний аналіз верстата з паралельною кінематикою типу «дельта»(КНТУ, 2013) Валявський, І. А.; Шапошник, В. Ю.; Valyavskaya, I.; Shaposhnik, V.В статті розглянуто вирішення зворотної задачі кінематики для верстата з паралельною кінематикою типу «дельта». Relevance of improved accuracy, efficiency, reliability and durability is the transfer of energy flows and movements of several parallel paths. The paper considers the inverse kinematics problem for a machine with parallel kinematics of the "delta".Тип:Документ, Аналіз робочого простору верстата з паралельною кінематикою при обробці деталей під кутом(КНТУ, 2013) Павленко, І. І.; Вахніченко, Д. В.; Pavlenko, I.; Vakhnichenko, D.В статті проаналізовано робочий простір верстатів з паралельною кінематикою при обробці під кутом за умови ведення обробки з різних боків деталі. Графічно було визначено, як впливає кут нахилу виконавчого органу на форму слідуючих функціональних зон, а саме: ехнологічну; резервну технологічну; інструменту; установчих рухів; конструктивну, обслуговування, недосяжну, нереалізовану. When designing mechanisms with parallel kinematics is important to determine the condition of the effective functioning of the machine, ie, the exercise of the necessary movements that are performed within the movement and orientation of the executive body. It is proposed to assess the functioning of machines by mechanisms with parallel kinematics (MPK), based on the conditions of movements at an angle such that the need for treatment holes at an angle where the mobile platform provides an appropriate traffic flow. For the effective implementation of the set operations must be informed determine design parameters machines by MPK. This machine operation is possible in the presence of geometric space, which is a working space (function space) machines by MPK limited basis, fixed top plate and side walls. This paper analyzes the workspace tools with parallel kinematics in the processing angle for conditions of handling parts from different angles. Graphically, it was determined the effect of the angle of the executive body of the form by following functional areas, namely technology, backup technology, tools, founding movements, structural, maintenance, unattainable, unrealized. The study presented in this paper show that the tilting platform to set the angle at the point of processing the service area of the MPK deviates from the axis of symmetry of the machines by MPK in the direction opposite to tilt the tool.Тип:Документ, Аналіз впливу конструктивних параметрів МПК на рух платформи під кутом(КНТУ, 2011) Павленко, І. І.; Вахніченко, Д. В.; Годунко, М. О.; Pavlenko, I.; Vakhnichenko, D.В статті досліджується вплив конструктивних параметрів механізмів з паралельною кінематикою на функціональні їх можливості. Influence of structural parameters of parallel structure mechanism on hexapod functional possibilities in the article.Тип:Документ, Інтегральний робочий простір верстатів-гексаподів(КНТУ, 2010) Павленко, І. І.; Валявський, І. А.; Гнатюк, А. О.; Pavlenko, I.; Valyavsky, I.В статті запропоновані удосконалені компоновочні схеми верстатів-гексаподів з керованими параметрами робочого простору, досліджено формування та параметри їх інтегрального робочого простору. In article advanced layout schemes of hexapods with operated working space parameters are offered, formation and parameters of their integrated working space is investigated.