Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
6 results
Search Results
Item type:Item, Дослідження процесу формування у ґрунті вологоутримуючого шару(ЦНТУ, 2023) Дідух, В. Ф.; Цизь, І. Є.; Тарасюк, В. В.; Хомич, С. М.; Didukh, V.; Tsiz, І.; Tarasyuk, V.; Khomych, S.У статті наведені дослідження закономірності перерозподілу вологи від органічних добрив підвищеної вологості до шарів ґрунту для формування вологоутримуючого шару під час вирощування сільськогосподарських культур. Результати вказують на доцільність використання сапропелю природної вологості для формування поживного шару на піщаному ґрунті. З метою механізованого внесення сапропель доцільно змішувати із доступними органічними наповнювачами. Впровадження способу вирощування сільськогосподарських культур з широкорядним способом посіву, який передбачає створення у ґрунті смуг із органічних добрив підвищеної вологості може бути реалізований на основі модернізованого розкидача органічних добрив. The purpose of the article is to study the regularity of moisture redistribution from organic fertilizers of high humidity to soil layers for the formation of a moisture-retaining layer during the cultivation of agricultural crops. For research, soil, organic fertilizers of high humidity and soil again were laid in layers in cylindrical containers. The moisture content of the layers was measured every 7-10 days. As a result, a clear distribution of the humidity of the layers was found in all variants of the experiment. The minimum humidity is found in the upper layer. The greatest migration of moisture to the upper layer took place on clay soil and the application of organic fertilizer sapropel + chaff of wheat straw. The moisture accumulated in the middle layer of organic fertilizers migrated the most to the lower layer in all variants of the experiment with clay soil, where the equalization of moisture in the middle and lower layers occurred during the first 30 days of the study. In the variants of the experiment with sandy soil, the maximum moisture retention in the middle layer was found for the organic fertilizer sapropel + wood sawdust and sapropel + wheat straw chaff. In order to implement the process of forming a layer of fertilizers with increased soil moisture under the conditions of growing agricultural crops of the wide-row sowing method, a scheme of a modernized spreader of organic fertilizers is proposed. The revealed regularities indicate the expediency of using sapropel of natural humidity for the formation of a nutrient layer on sandy soil. For the purpose of mechanized application by the working bodies of machines for solid organic fertilizers, it is advisable to mix sapropel with available organic fillers. The introduction of a method of growing agricultural crops with a wide-row sowing method, which involves the creation of strips of organic fertilizers of high humidity in the soil, can be implemented on the basis of a modernized, according to the scheme given in the article, spreader of organic fertilizers.Item type:Item, Вплив властивостей компонентів КМ (КП) на напружено-деформований стан і триботехнічні характеристики деталей СГТ(КНТУ, 2015) Аулін, В. В.; Кузик, О. В.; Носуленко, В. І.; Aulin, Viktor; Kuzyk, Oleksandr; Nosulenko, VictorРозглянуто різновиди контактування трибоелементів (ТЕ), зміцнених КМ (КП), які дозволяють істотно змінювати якість фізичного контакту, величину фактичної площі, здатність поверхневого шару (ПШ) ТЕ до еволюції складу і структури в процесі тертя та зношування. Виявлено ефективне гальмування руху дислокацій гетерогенними структурами КМ (КП), як при низьких, так і при високих температурах, а також рекристалізаційні процеси. Розглянуто напружений стан матеріалу ТЕ з КМ (КП) при терті. Отримано умову пластичної рівноваги компонентів у вигляді системи рівнянь та формула величини напруження при переході від матеріалу наповнювача до матеріалу матриці та визначено характер деформації, яким вони підлягають. Отримано вираз для критичного кута нахилу виступу і коефіцієнта тертя та проведена оцінка зміни коефіцієнта тертя. В процесі тертя і зношування ПШ КМ (КП) підлягає пружно-пластичному деформуванню, мало- або багато цикловому руйнуванню під силовим впливом, при протіканні теплових процесів та структурно-фазових перетворень, формуванню залишкових напружень різних знаків, спостерігається сумарний ефект силових, температурних та структурно-фазових залишкових напружень. The varieties of contact of triboelementov are considered tribo-element (TE), fortified composite material (CM) composition coating (CC), that allow substantially to change quality of physical contact, size of actual area, ability of superficial layer (SL) TE to the evolution of composition and structure in the process of friction and wear. The effective braking of motion of distributions the heterogeneous structures of CM(CC) is educed, both at subzero and at high temperatures, and also recrystallizations processes. The operating at a friction loading is distributed on hard fillers, that serve as opportune, barriers to movable distributions and reduce speed of flowage of matrix, that brings to the decline of intensity grasping over in a contact "matrix-matrix" and in a resiliently-plastic matrix there is relaxation of net voltages, minimum deformation and decline of probability of origin of cracks of tiredness. The tense state of material is considered TE of CM(CC) at a friction. The condition of plastic equilibrium of components as a system of equalizations and formula of size of tension are got in transition from material of filler to material of matrix and character of deformation is certain they are subject that. Expression for the critical angle of slope of performance and coefficient of friction and conducted estimation of change of coefficient of friction are got. In the process of friction and wear of SL CM(CC) subject to resiliently-plastic deformation, small- or much to cyclic destruction under power influence, at flowing of thermal processes and structurally-phase transformations, to forming of remaining tensions of different signs, there is a total effect of power, temperature and structurally-phase remaining tensions.Item type:Item, Закономірності контактної взаємодії частинок середовища ґрунту з РОГЗМ, зміцненими композиційними матеріалами та покриттями(КНТУ, 2014) Аулін, В. В.; Тихий, А. А.; Карпушин, С. О.; Aulin, V.; Tihiy, А.; Karpushin, S.В статті наведено результати дослідження напружено-деформованого стану ґрунту, як безперервного середовища, під дією робочих органів ґрунтообробних і землерийних машин (РОГЗМ). Експериментально встановлено зв'язок напруження в ґрунті зі зносом РОГЗМ. Наведено теоретичний аналіз напружено деформованого стану локальної області зміцненого поверхневого шару РОГЗМ, в якій розміщено наповнювач, включення або зміцнювальна фаза. За допомогою комп'ютерного моделювання досліджено характер розподілу напруження в зміцненому поверхневому шарі РОГЗМ в області контактної зони в стаціонарних та динамічних умовах. Сформульовано контактну задачу, наведені граничні умови та розв'язок у вигляді складових поля напруження. Враховуючи характеристики наповнювача, їх вміст в композиційному матеріалі і покритті, встановлено зв'язок між напружено-деформованим станом і зносом. The paper presents the results of the study stress-strain state of the soil as a continuous medium, under working parts of cultivation and digging machines (WPCDM). Experimentally established relationship stress in soil with demolition WPCDM. Theoretical analysis of stress strain state of the local area, hardened surface layer WPCDM that contains filler inclusion or strengthens phase. Using computer simulation investigated the distribution of stresses in a reinforced surface layer WPCDM in the contact zone in stationary and dynamic conditions. Formulated contact problem given boundary conditions and the solution in the form of components of the field strain. Given the characteristics of the filler, their content in the composite material and the coating, the connection between the stress-strain state and wear.Item type:Item, Аналіз структури кераміко-металевих композиційних покриттів, нанесених контактним наварюванням порошкових дротів(КНТУ, 2013) Василенко, І. Ф.; Vasylenko, I.У статті описано структуру та склад кераміко-металевих композиційних покриттів, одержаних контактним наварюванням порошкових дротів, показано доцільність використання для формування покрить плакованої кераміки. Застосування таких покриттів дозоляє підвищити довговічність деталей сільськогосподарської техніки. The purpose of article is the study of microstructures ceramic-metal composite coatings applied to the contact welding on cored wires, proving the suitability of such as wear-resistant coatings, and also show the benefits of using the coatings of chromium carbide clad nickel. To identify the processes occurring during the formation of the composite coating was carried out a comparative analysis of the structures of cored wires and derived welding on the contact surfaces. The microstructure of the welded surfaces was studied as on the light and the scanning microscopes. As shown and described article coatings pictures at a magnification of 100, 1000 and 1500. Evaluated porosity coatings, uniform distribution of carbides in the coatings, as well as the microstructure of metal matrix coatings. The studies concluded that the usefulness of using to improve the durability of parts of agricultural machines оf contact welding on cored wires, the core of which contains iron powder and chromium carbide, nickel-plated.Item type:Item, Комп'ютерне моделювання полів температур та напружень в композиційних матеріалах та покриттях при їх формуванні, терті та зношуванні(КНТУ, 2014) Аулін, В. В.; Бобрицький, В. М.; Aulin, Viktor; Bobrytskyi, VitaliiВ статті за допомогою комп’ютерного моделювання досліджено поле температур та напружено- деформований стан композиційних матеріалів та покриттів на всіх етапах їх життєвого циклу. Визначено розподіл нестаціонарних полів температур та напружень, які виникають в композиційних матеріалах та покриттях в процесі їх формування і тертя та зношування, а також локальні області з максимальною різницею перепаду температур і напружень та вплив на них внутрішніх і зовнішніх факторів. Виявлено тісний взаємозв'язок між складом композиційних матеріалів і покриттів, розмірами і формою їх структурних складових та статистичними і локальними значеннями досліджуваних полів температур і напружень відповідних нестаціонарних полів. Результати комп’ютерного моделювання дають можливість оптимізувати склад та структуру композиційних матеріалів та покриттів для підвищення їх фізико-механічних та триботехнічних характеристик і властивостей. The article by computer simulation investigated the distribution of temperature and stress-strain state of composite materials and coatings at all stages of their life cycle. Determined the distribution of transient temperature fields, stresses and strains that occur in composite materials and coatings in the process of forming and friction and wear , as well as local areas with a maximum difference of temperature and stress and the impact on their internal and external factors. Computer simulation of composite materials and composite coatings made it possible to construct a non-stationary heat field and thermal stress field in composite materials and composite coatings with dispersion - strengthened and eutectic types of structures that arise from stationary sources of heat ( of friction ). It is shown that the configuration of these fields are essentially uniform, there are significant changes in temperature and stress due to heterogeneity of structure heterogeneity thermophysical and mechanical properties of the structural components of composite materials and composite coatings that achieve , depending on the load of friction , melting components, and local stress - up to several GPa. The value of tensile stress and compressive alternating throughout the volume of the composite material and composite coatings. There is a close relationship between the structure of composite materials and composite coatings, the size and shape of structural components and statistical and local values of temperature and stress appropriate nonstationary fields. To minimize temperature changes and thermal stresses to use uniform size structure of the filler with a maximum dispersion of carbides and align the thermal properties of filler and matrix, which must provide high relaxation ability. According to the results of computer simulation can optimize the composition and structure of composite materials and coatings to enhance their physical and mechanical characteristics and tribotechnical.Item type:Item, Проектування складу композиційного покриття в умовах абразивного зношування(КНТУ, 2010) Василенко, І. Ф.; Шепеленко, І. В.; Красота, М. В.; Vasilenko, I.; Shepelenko, I.; Krasota, M.В статті наведено результати теоретичних досліджень, які дають можливість вибирати склад композиційних покриттів для умов абразивного зношування. In the article are the results of theoretical researches, which enable to choose composition of compositions covering for conditions abrasive wear-out.