Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
6 results
Search Results
Item Фізичні процеси при формуванні композиційних покриттів контактним наварюванням порошкових дротів(КНТУ, 2016) Василенко, І. Ф.; Vasylenko, IvanЗ метою підвищення довговічності валів сільськогосподарської техніки важливим є визначення режимів контактного наварювання порошкових дротів для нанесення композиційних покриттів. У статті відображено результати теоретичних досліджень розмірів та геометрії присадного матеріалу та їх зміни в процесі контактного наварювання. Проведені дослідження відкривають можливість теоретичного визначення режимів контактного наварювання порошкового дроту в залежності від потрібної товщини композиційного покриття на деталях сільськогосподарської техніки та його щільності. In order to determine the necessary conditions must be analytically explore occur during contact welding deformation processes. The work was analytically studied thermoplastic deformation of the filler flux-cored wire. Thus we considered two stage flow deformation: cold deformation before switching current impulse with a high porosity of the particulate material in the shell and hot deformation by heating of material flux-cored wire electric shock. The studies provided information on changes in the size and shape of flux-cored wire in the process of contact welding. The findings open the possibility of theoretically determining the mode of contact welding flux-cored wires according to the required thickness and density of the composite coating.Item Деформування порошкового дроту при контактному наварюванні(КНТУ, 2011) Василенко, І. Ф.; Шепеленко, І. В.; Красота, М. В.; Vasylenko, I.; Shepelenko, I.; M. Krasota, M.У статті наведені теоретичні дослідження зміни площі перерізу порошкового дроту при контактному наварюванні, а також площі контакту порошкового дроту з відновлюваною деталлю та роликом-електродом. Це відкриває можливість теоретичного визначення режимів контактного наварювання порошкових дротів. Theoretical researches of the change area sections of the powdered wires are brought in article under contact welding, as well as area of the contact of the powdered wire with restored by detail and roller-electrode. This opens the possibility of the theoretical determination mode contact welding powdered wires.Item Аналіз структури кераміко-металевих композиційних покриттів, нанесених контактним наварюванням порошкових дротів(КНТУ, 2013) Василенко, І. Ф.; Vasylenko, I.У статті описано структуру та склад кераміко-металевих композиційних покриттів, одержаних контактним наварюванням порошкових дротів, показано доцільність використання для формування покрить плакованої кераміки. Застосування таких покриттів дозоляє підвищити довговічність деталей сільськогосподарської техніки. The purpose of article is the study of microstructures ceramic-metal composite coatings applied to the contact welding on cored wires, proving the suitability of such as wear-resistant coatings, and also show the benefits of using the coatings of chromium carbide clad nickel. To identify the processes occurring during the formation of the composite coating was carried out a comparative analysis of the structures of cored wires and derived welding on the contact surfaces. The microstructure of the welded surfaces was studied as on the light and the scanning microscopes. As shown and described article coatings pictures at a magnification of 100, 1000 and 1500. Evaluated porosity coatings, uniform distribution of carbides in the coatings, as well as the microstructure of metal matrix coatings. The studies concluded that the usefulness of using to improve the durability of parts of agricultural machines оf contact welding on cored wires, the core of which contains iron powder and chromium carbide, nickel-plated.Item Дослідження властивостей композиційних покриттів, нанесених контактним наварюванням порошкових дротів(КНТУ, 2014) Василенко, І. Ф.; Vasylenko, IvanНаведені в статті результати дюрометричних досліджень, а також досліджень пористості та зносостійкості композиційних покриттів, нанесених контактним наварюванням порошкових дротів, показали доцільність застосування таких покриттів для деталей сільськогосподарської техніки, які працюють в умовах абразивного зношування. Вибрано склад порошкових дротів, що забезпечує одержання композиційних покриттів з найвищою зносостійкістю. The aim of the article is to study the hardness, porosity and wear resistance are ceramic-metal composite coatings deposited contact with hard facing cored wires , and the feasibility of using such coatings for parts of agricultural machinery. Microhardness distribution is characteristic of the composite coatings. Porosity of the coatings is acceptable aisles and ensures reliable operation. Selected composition of cored wires, which provides composite coatings with the highest wear resistance. The studies concluded that the feasibility of using to improve the wear resistance of parts of agricultural machinery, working in conditions of abrasive wear, contact welding on cored wires selected composition.Item Електричний опір порошкового дроту при формуванні покриття контактним наварюванням(КНТУ, 2012) Василенко, І. Ф.; Шепеленко, І. В.; Красота, М. В.; Vasylenko, І.; Shepelenko, І.; Krasota, М.При контактному наварюванні внаслідок деформування та нагрівання порошкового дроту змінюється співвідношення між площами поперечного перерізу порошкового матеріалу і оболонки, що впливає на ефективність і кінематику нагрівання присадного матеріалу та приконтактного об’єму деталі. З метою виявлення процесів, що визначають нагрівання присадного матеріалу при контактному наварюванні, теоретично досліджено зміну електричного опору оболонки та порошкового осердя дроту методом кластерних компонентів. Інформація про електричний опір порошкового дроту дає можливість теоретичного визначення режимів контактного наварювання композиційних покрить з використанням у якості присадного матеріалу порошкових дротів. At the pin welding on because of deformation and heating of powder-like wire a betweenness changes by the areas of cross-sectional of powder-like material of і shell, that influences on efficiency and kinematics of heating of doped material and приконтактного volume of detail. With the purpose of exposure of processes, qualificatory heating of doped material at the pin welding on, in theory the change of electric resistance of shell and powder-like mandrel of wire is investigational the method of cluster components. Information about electric resistance of powder-like wire gives an opportunity of theoretical determination of the modes of the pin welding on of composition coverages with using as doped material of powder-like wires.Item Вибір матеріалів порошкових дротів для нанесення композиційних покриттів(КНТУ, 2015) Василенко, І. Ф.; Vasylenko, IvanВ статті відображено результати досліджень, пов’язаних з вибором матеріалу порошкових дротів, призначених для контактного наварювання композиційних покриттів на деталі сільськогосподарської техніки, які працюють в умовах абразивного зношування. Описано установку для виготовлення порошкових дротів в лабораторних умовах. Проаналізовано мікроструктуру одержаних покриттів. The aim of the article is the choice of material cored wire designed for welding on the contact composite coatings on parts of agricultural machinery, which operate in conditions of abrasive wear. The article analyzes the materials used to produce composite coatings. Selected materials suitable for use in conditions of contact welding on cored wires. Describes an adjustment for the production of cored wires in the laboratory. The microstructure of the resulting coatings was investigated. As a result of studies to obtain a composite coating with high wear resistance. Details of agricultural machinery, hardened such coatings, have high performance in the conditions of abrasive wear.