Збірники наукових праць ЦНТУ

Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1

Browse

Search Results

Now showing 1 - 6 of 6
  • Item
    Дослідження травмування насіння робочими елементами протруювача при проходженні технологічного процесу
    (КНТУ, 2016) Дерев’янко, Д. А.; Derevyanko, Dmitro
    При проходженні технологічного процесу протруювання насіння зернових культур перед сівбою,на травмування зернівок впливають робочі елементи похилого, горизонтального та вертикального гвинтових шнеків, а також камера змішування протруювача . На травмування зернівок впливають такі фактори як кут нахилу спіралі гвинта, швидкість руху, заповнення, зворотне зсипання, затиснення, притиснення, защемлення, оберти гвинта, відцентрова сила змішувача, радіус польоту, висота падання, тяжіння та час знаходження зернівок під дією цих чинників. При потраплянні насіння у камеру змішування протруювача на зернівки діє відцентрова сила, маса, удари з поверхнею змішувача, сили руху опору, швидкості обертання, що безумовно впливає на травмування насіння. На різних стадіях технологічного процесу протруювання відбувається травмування насіння, але більше при транспортуванні шнековими транспортерами і в камері змішування. The research of the seeds damaging caused by the working parts of the machine for dipping during the technological process. During the technological process of the grain seeds dipping before sowing, the weevils damaging is affected by the working parts of the inclined, horizontal and vertrical spiral augers as well as by the chamber for mordant mixing. The weevils damaging is affected by the slope angle of the auger spiral, the motion speed, the filling-in speed, the reverse emptying, pressing, compressing, screw rotation, centrifugal force in the mixing chamber, the flight radius, the dropping height, gravity as well as by the period of time during which the weevils are under these factors. When the seeds get into the mixing chamber of a machine for dipping, the weevils get under the effects of a centrifugal force, mass, striking againts the chamber walls, motion force, resistanse, rotation speed damaging.
  • Item
    Вплив травмування на міцність насіння зернових культур
    (КНТУ, 2014) Дерев’янко, Д. А.; Derevyanko, D.
    В статті розглядаються дослідження травмування та руйнування зернівок від впливу зовнішніх та внутрішніх факторів. The paper considers the research of the weevil damage and compression as a result of inner and outer factors. The effects of damaging on the solidity of the cereal seeds. In the process of a constant weevils damaging a plastic zone appears at the end of a crack at the end of damaging the increase in pressure results in additional efforts in the zone of a plastic deformation. These additional efforts lead to the increase in microdamages which are the basis for the creation of the future weevils cracking resulting in their damaging. The nature of weevils damaging depends on the cracks size and guantity as well as on their location. Being taker together they effect the seeds solidity, that is their damages and deformities.
  • Item
    Вплив чинників післязбиральної обробки зерна на якість насіннєвого матеріалу
    (КНТУ, 2010) Грабар, І. Г.; Дерев’янко, Д. А.; Герук, С. М.; Grabar, I.; Derev’yanko, D.; Geruk, S.
    В статті аналізується стан насіннєвого матеріалу при доочистці зерна після збирання і його травмування при цьому. Розглядається роль зерноочисних машин, вібросепараторів та вплив організаційно-технічних заходів для підготовки і зберігання високоякісного насіння. The paper analyzes the state of sceding material under the additional clarification of grain after harvesting and its injury during this process. The author considers the role of grain cleaners, vibroseparators and the effects of organizational and technical measures on the preparation and storage of high quality seeds.
  • Item
    Травмування зерна внаслідок дії внутрішніх і зовнішніх чинників та якість насіння і зернофуражу
    (КНТУ, 2011) Дерев’янко, Д. А.; Derevyanko, D.
    В статті розглядається вплив внутрішніх і зовнішніх чинників в зв’язку з якісними показниками зерна і навколишнього середовища при збиранні урожаю, післязбиральній доробці насіння та переміщення і зберігання зернофуражу зернових і зернобобових культур. Підтверджується що травмування зерна має значні незадовільні наслідки на якісні і продуктивні показники насіння і зернофуражу. The paper examines the effect of internal and external factor in correlation with qualitative indices of grain as well as of the environment in the harvest period, after harvest seed preparation as well as transportation and storage of grain fodder and pulse fodder. Grain damage is proved to have considerable negative effects on the qualitative and productive indices of seed grain and grain fodder.
  • Item
    Інтенсифікація процесу пров'ялювання різних частин стебла бобових трав при допомозі плющення
    (КНТУ, 2008) Дерев’янко, Д. А.; Кондратюк, Д. Г.; Комаха, В. П.
    Суттю даної роботи є більш глибше дослідження динаміки вологовіддачі різних частин рослин, а саме стебла. Досліджена динаміка дозволить запропонувати технічні та технологічні рішення з метою зменшення втрат, як при обробітку так і при сушінні трав у полі. Essence of this work is more more deep research of change of humidity of different parts of plants, namely stems. An investigational dynamics will allow to decide the row of technical and technological questions with the purpose of diminishing of losses, as at till so at drying of herbares in the field.
  • Item
    Дослідження впливу механічних навантажень на травмування насіння барабанними та аксіально-роторними обмолочувальними апаратами
    (КНТУ, 2014) Дерев’янко, Д. А.; Derevianko, Dmitry
    В статті проводяться теоретичні розрахунки та обґрунтування впливу різних обмолочувальних апаратів на травмування насіння зернових культур. Розглядаються головні відмінності режимів роботи таких апаратів та їх вплив на пошкодження і травмування зернівок. The theoretical calculations and the substantiations of the effects of different threshing devices on the damage of the grain crops seeds are given in the paper. The principal differences in the work regimes of such devices as well as their effects on the weevils damage and compression are considered in the paper.