Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
7 results
Search Results
Item Мінімізація втрат енергії під час реалізації змін продуктового асортименту(КНТУ, 2016) Іващук, В. В.; Ладанюк, А. П.; Ivaschuk, Vjacheslav; Ladaniuk, AnatoliiВ статті приведено методику оцінювання помилок при керуванні об’єктом з несприятливими динамічними характеристиками, під час зміни завдання. Практично доведено необхідність у здійсненні супроводження процесу керування в режимі зміни завдання та обґрунтовано концепцію керування об’єктом для мінімізації енергетичних витрат при роботі з асортиментним продуктом. The article describes the method of estimating errors for control of object which have poor dynamical characteristics, for a change of control tasks. Practically proved the need for the implementation of support of process control in the mode of change of tasks and proved the concept of facility control to minimize energy consumption when using the assortment of product. Implement control, which assign variables of the object, which had been involved in the creation of a technological mode for function, which had associated with observed variables. Using models in circuit of control will have ensure coordination for the minimum steps when changing product technology, to minimize mistakes while guiding technological objects, which have adverse dynamical characteristics for implementation of control. So, further use of indirect dependencies and multivariable control of process variables of object, by increasing the informational basis, will contribute to prevention of accident, which are lead to blockage of the production line..Item Проблеми системного сценарно-цільового управління технологічним комплексом (ТК) цукрового заводу(КНТУ, 2011) Ладанюк, А. П.; Власенко, Л. О.; Бойко, Р. О.; Ladanyuk, A.; Vlasenko, L.; Boiko, R.Використання сценарно-цільового підходу при керуванні ТК цукрового заводу дозволяє уникнути виникнення позаштатних ситуацій, значно скоротити час на прийняття рішень. Зокрема, за допомогою фактичних операцій табличних прографів проводиться імітація розв’язку ситуацій, які виникають, а прогнозні операції забезпечують оцінку динаміки можливої поведінки системи і її параметрів. Using the scenario-oriented approach for sugar plant technological complex control helps to avoid abnormal situations, significantly reduce the decision-making time. Thus, with the help of actual operations of table prografs the imitation of appeared situations decisions is provided. And prognosis operations provide estimation of dinamic in possible behaviour of the system.Item Необхідність та можливість підвищення якості системи автоматичного регулювання об’єктами агропромислового комплексу за рахунок використання адаптивних алгоритмів(КНТУ, 2014) Кроніковський, Д. О.; Ладанюк, А. П.; Kronikovskyi, D.; Ladanyuk, А.Останнім часом досить популярним серед науковців є дослідження адаптивних методів, що мають в основі нечітку логіку або нейромережний апарат в поєднанні з класичними алгоритмами керування. Метою статті є розкриття необхідності та можливості підвищення якості системи автоматичного регулювання (САР) за використання адаптивних алгоритмів. Для ґрунтовного дослідження можливості використання адаптивних регуляторів, зокрема ПІД-нейро та ПІД-нечіткого, для технологічних об’єктів харчової промисловості було зроблено ряд експериментів. Адаптивні алгоритми були реалізовані в середовищі MatLab. Проведений експеримент засвідчує перевагу ПІД-нечіткого адаптивного алгоритму над неадаптивним за рахунок меншої динамічної похибки та часу виходу на завдання (часу регулювання). Проте, якщо розглядати його в порівнянні з ПІД-нейро алгоритмом, то відносні показники є гіршими. Задача створення адаптивних систем є досить актуальною, що об’єктивно пояснюється наведеними прикладами і необхідністю покращення ефективності функціонування технологічних об’єктів харчової промисловості. Recently, quite popular among scientists is investigation of adaptive methods that are based on fuzzy logic and neuro apparatus combined with classical control algorithms. The aim of the article is checking the necessity and possibility of improving the quality of automatic control system (ACS) by using adaptive algorithms. The experiments confirms superiority in -fuzzy adaptive algorithm of nonadaptive due to less dynamic error and control time. However, when viewed in comparison with neuro - PID algorithm , the ratios are worse. Problem of creating adaptive systems is quite relevant that objectively explained above examples and needs to improve the efficiency of the food industry technological objects. The proposed method of correction of transient guaranteed to give positive results, but its implementation using the optimal switching applications sensitive to even small changes in the parameters of the object and the action of disturbances. Algorithm adaptation is primarily aimed at changing the parameters of the regulator, and is known to change settings while driving to the optimal criterion can lead to loss of stability. This algorithm does not need to be in the controller. It is expedient to provide for its operation directly on your PC, because it can significantly burden the processor controller. Thus adaptation algorithm complemented evaluation of stability that will ensure the avoidance of an emergency situation in the future and improve the automation system as a whole.Item Автоматизоване керування технологічним комплексом виробництва пива на основі сценарно-цільового підходу(КНТУ, 2013) Власенко, Л. О.; Місюра, М. Д.; Ладанюк, А. П.; Кишенько, В. Д.; Vlasenko, L.; Misyura, M.; Ladanyuk, A.; Kishenko, V.Наведено результати проведення системного аналізу на основі сценарно-цільового підходу для технологічного комплексу (ТК) виробництва пива. В результаті роботи розроблені А- та С-сценарії, проведено імітаційне моделювання за допомогою апарату прографів. The improving the efficiency of TC beer production from scriptwriting-targeted approach. The results of system analysis for beer production technical complex on the base of scenario-oriented approach are given. The results of work are A- and C-scenarios are developed and simulation was conducted with the help of prograf set. Conducted in three phases systematic analysis of TC beer production from scriptwriting-purpose approach proved the feasibility and necessity of its use. In the first phase TC is described by A script that provides: the links between technological elements that are its members, and their impact on the situation arising, the second stage is it (a script) specification in the base and prografs and tabular analysis of the behavior of TC under different conditions, the third stage is the implementation developed efficient algorithms based management conducted a systematic analysis of modern information technology and the use of various intellectual mechanisms by C-script. The result is to increase the efficiency of TC brewing industry and reduce the time to make the right decisions.Item Ситуаційне управління складним динамічним об’єктом(КНТУ, 2014) Ладанюк, А. П.; Бойко, Р. О.; Герасименко, Т. М.; Смітюх, Я. В.; Ladanyuk, A.; Boiko, R.; Gerasymenko, T.; Smityuh, Ya.В статті наведено результати ситуаційного управління складним технологічним об’єктом – солодосушаркою шахтного типу з використанням апарату нечітких множин. Показано, що процес функціонування солодосушаркою характеризується множиною ситуацій, кожну з яких необхідно ідентифікувати та поставити у відповідність їй певні керувальні дії. Розроблена адаптивна система автоматизації з використанням еталонної моделі та лінгвістичних змінних. This article presents the results of situational management of complicated technological object – drying malt of shaft type with using of indecipherable multiplicity device. Shown that functional process of grist kilt is characterized multiplicity of situations, each of which is necessary to identify and set appropriate managerial acts. Developed adaptive automatization system with using of template model and linguistic variables. Mathematical model of object in common view is given for ability of observation and management of object evaluation, time component rows are distinguished in trend view, seasonal and cyclic components etc. Formalization of indefinite situations in view of multiplicity of second level is given. The adaptive management system is based on indefinite conclusions.Item Системна задача координації в технологічних комплексах неперервного типу(КНТУ, 2012) Ладанюк, А. П.; Шумигай, Д. А.; Бойко, Р. О.; Ladanuk, А.; Shumigay, D.; Boyko, R.В статті розглядається підхід до постановки розширеної задачі координації в технологічних комплексах неперервного типу. Зокрема розглядається складний технологічний комплекс цукрового заводу. Описані основні особливості вирішення поставленої задачі координації. The paper considers an approach to setting the extended task of the coordination in technological complex of continuous type. In particular technological complex of sugar factory is considered. The main features of the solution of the coordination problem are described.Item Використання мультимедійних технологій при викладанні спеціальних дисциплін(КНТУ, 2008) Іващук, В. В.; Луцька, Н. М.; Ладанюк, А. П.В даній роботі представлені можливі варіанти створення інтегрованих додатків активного викладання студентам спеціальних дисциплін. Матеріал являє собою концептуальний путівник до створення електронних додатків навчання на базі сучасних психолого-педагогічних механізмів. In this work pay more attention to version making of integrated application in active teaching from special course for students. The source is conceptual guide for making computer-aided application for teaching on the base of modern psychology-pedagogical mechanisms.