Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
3 results
Search Results
Item Теоретичне обґрунтування параметрів пруткового самоочисного решета(ЦНТУ, 2024) Лузан, П. Г.; Грінчук, А. Є.; Кісільов, Р. В.; Лузан, О. Р.; Luzan, P.; Hrinchuk, A.; Kisilov, R.; Luzan, O.У статті наведено теоретичне обґрунтування параметрів пруткового самоочисного решета, яке використовується для очищення зернових мас. Розглянуто основні конструктивні особливості решета, його принцип роботи та механізм самоочищення. Розроблено математичну модель, яка дозволяє визначити оптимальні параметри конструкції залежно від властивостей зернового матеріалу, режимів роботи та вимог до якості очищення. Проведено аналіз впливу питомого навантаження, швидкості руху, діаметру прутків на повноту виділення компонентів зернової суміші різних розмірів та мінімізацію забивання решета. Результати дослідження можуть бути використані для вдосконалення конструкції зерноочисного обладнання, підвищення його продуктивності та зниження енерговитрат. The aim of the work is to reduce energy costs for the operation of grain cleaning machines by substantiating the parameters of a flat self-cleaning bar sieve. Special attention is paid to the optimization of sieve parameters to ensure high-quality separation of grain masses with different physical and mechanical properties. The relevance of the study is due to the need to increase the efficiency of grain cleaning equipment, ensure high quality cleaning and reduce energy consumption in the processing of agricultural products.Item Теоретичні аспекти розділення зерна на решеті інерційно-гравітаційного сепаратора(ЦНТУ, 2021) Лузан, П. Г.; Кісільов, Р. В.; Лузан, О. Р.; Кислун, О. А.; Luzan, P.; Kisilyov, R.; Luzan, O.; Kyslun, O.Виконано обґрунтування технологічної схеми решета інерційно-гравітаційного сепаратора з щілинами, що розширюються в напрямку руху оброблюваного матеріалу та встановлено вплив його основних параметрів на ефективність сепарації зернових сумішей. Встановлено закономірності руху зернової суміші по поверхні решета, коли створюються сприятливі умови для проходження крізь щілини часток, які можуть пройти крізь нього. Запропоновано методику розрахунку основних геометричних та кінематичних параметрів решета. The aim of the article is to substantiate the design, derivation and approbation by calculations of formulas for determining the parameters of the sieve with slits that expand in the direction of movement of the processed material. It is established that grain cleaning machines, which currently work on agricultural and processing enterprises with flat sieves, have been used for many years, are well studied and improved, their technical and economic indicators have reached maximum values. The problem is that to ensure the proper operation of existing grain cleaning machines with traditional flat sieves, a large amount of energy costs are spent on additional operations that are not directly related to the separation process, but without them the normal operation of the machine is impossible. This is directly the transportation of grain and cleaning the sieves from grains that are stuck in the cracks and degrade the quality of their work. The substantiation of the technological scheme of the inertial-gravity separator sieve with slits expanding in the direction of movement of the processed material is performed and the influence of its main parameters on the efficiency of separation of grain mixtures is established. The regularities of the movement of the grain mixture on the surface of the sieve are determined, when favorable conditions are created for the passage through the slits of particles that can pass through it. The method of calculation of the basic geometrical and kinematic parameters of a sieve is offered. To implement the proposed calculation method developed software that allows you to convert blocks developed in analytical form of the calculation method in a form that meets the requirements of the architecture of mathematical models and implements the numerical methods of Runge-Kutt and Nelder-Mead. Tests have shown that the quality of separation of wheat grain on the proposed sieve increases by 12- 14% compared to existing ones. When implementing the sieves of the proposed design, the issue of influencing the quality of separation of the magnitude of the bar deflection in the end part and their limits for different crops remains unresolved.Item Обґрунтування параметрів решета для сепарації зерна(КНТУ, 2016) Лузан, П. Г.; Лузан, О. Р.; Петренко, Д. І.; Luzan, Petro; Luzan, Olena; Petrenko, DmitryВ роботі запропоновано методику обґрунтування параметрів та визначення умов проходу часток зернової суміші крізь щілини решета, виконаного з набору стержнів, що розширюються у бік руху оброблюваного матеріалу. Встановлено, що на показник кінематичного режиму найбільше впливають початкова швидкість руху оброблюваного матеріалу та радіус решета, зміною яких можна добиватися необхідної ефективності сепарації. Визначено умови проходу часток оброблюваного матеріалу крізь щілини решета та умови, коли вони в них не застрягають. The objective of this work is to develop a method for substantiation of parameters along with determination of conditions for passing grain particles through the sieve openings, diameter of which is increasing toward work material movement and made with set of rods. It has been defined that the biggest impact on kinematic movement parameters has the starting speed of work material movement and the radius of a sieve and by changing this parameters the required effectiveness for this type of sieves can be achieved. The conditions of passing of work material particles through sieve openings without blocking the openings were defined. The increase of kinematic movement parameters takes place with the increase of starting speed, while increase of a radius has an opposite impact. The usage of offered sieves increase separation effectiveness by 12-14% compared to regular sieves.