Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
Search Results
Item Об’єм кузова машин для внесення твердих органічних добрив та їх габаритні розміри(ЦНТУ, 2022) Лімонт, А. С.; Лімонт, З. А.; Limont, А.; Limont, Z.Мета статті полягала в дослідженні і з’ясуванні кількісної зміни об’єму кузова машин для внесення твердих органічних добрив як результативної ознаки залежно від їх габаритних розмірів, як факторіальних ознак. Досліджена і зміна габаритних довжини, ширини та висоти машин залежно від об’єму їх кузова. Об’єм кузова машин та їх габаритна висота є одними з параметрів кузовних машин, які використовують для розрахунку навантажувального забезпечення технологічного процесу внесення твердих органічних добрив. Дослідження і з’ясування відповідних парних зв’язків параметрів машин здійснені з використанням методів кореляційно-регресійного аналізу та стандартних комп’ютерних програм. Зміна об’єму кузова від габаритної довжини машини, об’єму кузова від висоти машин і навпаки габаритних довжини та висоти машин залежно їх об’єму описується прямими з додатними кутовими коефіцієнтами. Зміна об’єму кузова залежно від габаритної ширини машин також описується прямою з додатним кутовим коефіцієнтом, а зміну габаритної ширини машини залежно від об’єму кузова краще описати сповільнено зростаючою степеневою функцією. Опрацьовані модельні лінії прямолінійної регресії більшості результативних ознак на факторіальні і криволінійної регресії габаритної ширини машин на об’єм кузова. Along with other agronomic techniques and measures to increase soil fertility, a significant role belongs to the application of solid organic fertilizers. Among the technical means used to apply such fertilizers, an important place is occupied by body machines. The purpose of the article was to study and clarify the quantitative change in the volume of the body of such machines as a productive feature depending on their dimensions, as factorial features. The change of overall length, width and height of cars depending on the volume of their body is also investigated. The volume of the body of machines and their overall height are one of the parameters of body machines, which are used to calculate the load support of the technological process of solid organic fertilizers. Investigations and elucidation of the corresponding pairwise relationships of machine parameters were performed using correlation-regression analysis methods using standard computer programs. The statistical reconciliation included 47 brands of body machines for the application of solid organic fertilizers produced by enterprises in the former Soviet Union, “KUHN” and “Strautmann”. Empirical distributions of the investigated parameters of body machines for application of solid organic fertilizers are processed. The range of variation of parameters, arithmetic mean values and standard deviations and coefficients of variation of empirical distributions of parameters of these machines are determined. Between the studied resultant and factorial traits, a positive correlation was found with correlation coefficients in the range from 0.523 to 0.893 with correlation ratios of the resultant traits to factorial ones, which took values from 0.611 to 0.899. The closest relationship was found between the volume of the body and the overall length of the cars. The change in body volume from the overall length of the car, body volume from the height of the car and vice versa overall length and height of the car depending on their volume is described by straight lines with positive body coefficients. The change in body volume depending on the overall width of the machine is also described as a straight line with a positive angular factor, and the change in the overall width of the machine depending on the body volume is better described by a slowly increasing power function. The model lines of rectilinear regression of the majority of effective signs on factorial and curvilinear regression of overall width of cars on body volume are developed. If the last change is given by the equation of increasing hyperbola (R2 = 0.311), as a partial case of slowly increasing power function, then the asymptote of the hyperbola can be determined with the estimated maximum overall width of body machines for solid organic fertilizers, which should be 2745 mm.Item Прогнозування параметрів кузовних машин для внесення твердих органічних добрив(ЦНТУ, 2022) Лімонт, А. С.; Лімонт, З. А.; Limont, A.; Limont, Z.Мета статті полягала в обґрунтуванні тенденції зміни основних масово-розмірних параметрів кузовних машин для внесення твердих органічних добрив залежно від їх вантажопідйомності. Здійснений аналіз конструкцій машин виробництва підприємствами на території колишнього Радянського Союзу та сучасної України. Методи дослідження базувалися на вивченні основних споживчих параметрів машин з використанням відомостей, що наведені в Каталогах сільськогосподарської техніки і рекламній інформації підприємств-виробників кузовних машин. Опрацювання і узагальнення зібраних даних здійснені на засадах кореляційно-регресійного аналізу та з використанням стандартних комп’ютерних програм. За факторіальну ознаку в дослідженні прийнята вантажопідйомність машин, а за результативні – їх маса та габаритні довжина, ширина і висота. З’ясовано, що залежно від вантажопідйомності машин їхні габаритні довжини і висота зростають за прямолінійними залежностями з визначеними кутовими коефіцієнтами. Зміна габаритної ширини кузовних машин для внесення твердих органічних добрив залежно від вантажопідйомності машин описується рівнянням зростаючої гіперболи. The purpose of the article was to substantiate the trend of changing the basic mass and dimensional parameters of body machines for the application of solid organic fertilizers depending on their capacity. The analysis of constructions of machines of production by the enterprises in the territory of the former Soviet Union and modern Ukraine is carried out. The research methods were based on the study of the main consumer parameters of machines using the information provided in the Catalogs of agricultural machinery and advertising information of enterprises-manufacturers of body machines. Processing and generalization of the collected data is carried out on the basis of correlation-regression analysis and using standard computer programs. The load-bearing capacity of the machines was taken as a factorial feature in the study, and their weight and overall length, width and height were taken as effective. The range of variation, arithmetic mean, standard deviation and coefficient of variation of factorial and performance characteristics are determined. There is a positive correlation between the mass of body machines, their overall length, width and height and load capacity of the machines with correlation coefficients of 0.959, respectively; 0.9000; 0.721 and 0.864 for correlation ratios of performance traits to factorial in the same sequence 0.960; 0.862; 0.859 and 0.840. According to certain correlation indicators, depending on the load capacity of the machines, the effective characteristics should increase. To finally clarify the nature and form of communication, the experimental values of the performance characteristics were aligned depending on the load capacity of the machines by the equations of direct power and logarithmic functions and exponents and hyperbolas. According to the calculated R2-coefficients, the best approximation to the experimental values of machine mass and overall length and height was provided by approximation of their change depending on load capacity by equations of lines with positive angular coefficients, and to experimental values of dimensional width by approximation of. It was found that depending on the load capacity of machines, their overall lengths and heights increase in a straight line with certain angular coefficients. The change in the overall width of the body machines for the application of solid organic fertilizers depending on the load capacity of the machines is described by the equation of increasing hyperbola.