Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
6 results
Search Results
Item Вплив агрегатів на якість розпушування і рівномірність глибини обробітку ґрунту(ЦНТУ, 2017) Пустовіт, С. В.; Котков, В. І.; Poustovit, S.; Katkov, V.Вивчено якість роботи комбінованих агрегатів на передпосівному обробітку ґрунту. Викладено результати досліджень агрегатів для передпосівного обробітку ґрунту та посіву цукрових буряків. Приведені результати досліджень за якістю розпушування і рівномірністю глибини обробітку ґрунту. Досліджено якісні показники роботи із сівалками пневматичного типу СТВ-12, “Мультикорн”, так і сівалки типу ССТ-12В з механічним висівним апаратом.The quality of work of combined aggregates on pre-planting of soil is studied. The results of research of aggregates for pre-sowing tillage and sugar beet sowing are presented. The results of researches on quality of loosening and uniformity of depth of cultivation of a ground are resulted. Qualitative indices of work with pneumatic type seeders STV-12, "Multikorn", and seeders of type ССТ-12В with mechanical seeding machine are investigated. According to the results of agrotechnical evaluation of the experimental combined aggregate for preplanting of soil and seeding of sugar beet seeds in comparison with traditional aggregates, the following results were achieved: - Improvement of soil cultivation in the zone of earning seeds, as evidenced by an increase in field similarity of sugar beet seeds and the emergence of more friendly stairs; - reduction of the seed seed rate in connection with the increase of its field similarity; - Increasing the yield of sugar beet root crops by 10 ... 15%; - reduction of operating costs for pre-planting of soil and seeding of sugar beet.Item Визначення зон деформації ґрунту при роботі дискових знарядь(КНТУ, 2016) Пустовіт, С. В.; Котков, В. І.; Шмалюк, М. І.; Pustovit, S.; Kotkov, V.; Shmalyuk, M.Описано теоретичне обґрунтування величини площ зон деформованого та недеформованого дисками ґрунту, значення площ яких, дозволить визначити тяговий опір агрегату та визначити відстані між дисками на батареї. A promising solution preplant tillage is to create appropriate designs combined tillage machines. The aim is to study the basic parameters and operating modes of the disk plow split paw. Theoretical study area size and deformed zones deformed disks soil mentioned areas will determine their traction and resistance unit of distance between wheels on the battery. The theoretical justification value areas and zones of deformation deformed disks soil. The resulting deformation zones mentioned areas of soil tillage machinery drives will determine traction resistance unit to analyze power inputs for further loosening deformed zones.Item Визначення циркуляції вороху у молотарці зернозбирального комбайна(КНТУ, 2013) Герук, С. М.; Пустовіт, С. В.; Geruk, Stanislav; Pustovit, S.Викладено методику визначення закономірності циркуляції колосового вороху в молотарці комбайна, яка проводилась на експериментальній установці. Описано спосіб забарвлення насіння для визначення циркуляційних процесів.The determination methods of regularity of the ear heap circulation, which were held at the experimental laboratory plant, are explained. The way of the seed colouring for circulation processes determination is described. Conformity to law of circulation lots in the threshing machine of combine can be studied during work of row of the parallell set cleanings with a transmission ear lots to every following from them.The purpose of work is a search of ways of effective decline of injuring of grain at collection, research of process of circulation and separacii of components ear lots. Geared-up thus grain was used for a study conformity to law of circulation lots in the threshing machine of combine and its influence on the indexes of work of cleaning. For this purpose by us was the developed and made setting, that allows to define the size of the circulatory loading during three cycles.Item Обгрунтування необхідної довжини сепаруючої поверхні нижнього решета очистки(КНТУ, 2015) Пустовіт, С. В.; Pustovit, SergiyОписано конструктивні параметри нижнього та верхнього жалюзійного решета та проведено обґрунтування необхідної довжини сепаруючої поверхні нижнього решета очистки. The aim of this work is to reduce injury to the grain during harvesting, by way of justification required length separating the bottom surface of the cleaning sieve. Describes the design parameters of the upper and lower louvered sieve and conducted substantiation required length separating the bottom surface of the cleaning sieve. Determined the length of flight of grains after impact along the line of the lower sieve and the flight time. The dependence for determining the necessary length of the lower louver sieve, cleaning of the combine.Item Теоретичне обгрунтування винесення вільного зерна з решіт очищення в камеру колосового шнека зернозбирального комбайна(КНТУ, 2012) Пустовіт, С. В.; Pustovit, S.Викладено теорію винесення вільного зерна з решіт очистки в камеру колосового шнека зернозбирального комбайна. The theory of taking away of free grain is expounded from the sieves of cleaning in the chamber of ear шнека of combine harvester.Item Спосіб визначення циркуляції вороху у молотарці зернозбиральної машини(КНТУ, 2011) Тарасенко, О. П.; Герук, С. М.; Пустовіт, С. В.; Tarasenko, O.; Geruk, S.; Pustovit, S.Викладено методику визначення закономірності циркуляції колосового вороху в молотарці комбайна, яка проводилась на експериментальній установці. Описано спосіб забарвлення насіння для визначення циркуляційних процесів. The determination methods of regularity of the ear heap circulation, which were held at the experimental laboratory plant, are explained. The way of the seed colouring for circulation processes determination is described.