Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
9 results
Search Results
Item Дослідження двосекційного змішувача для приготування збалансованих сумішей на фермах ВРХ(ЦНТУ, 2020) Кісільов, Р. В.; Хмельовський, В. С.; Лузан, П. Г.; Сисоліна, І. П.; Kisilyov, R.; Khmelevsky, V.; Luzan, P.; Sysolina, I.; Кисилев, Р. В.; Хмелевский, В. С.; Сысолина, И. П.У статті на підставі проведено аналізу існуючих конструкцій запропоновано нову схему двосекційного стрічково-лопатевого змішувача. Експериментальні дослідження визначили вплив конструктивних і режимних параметрів на якість приготування кормосуміші для великої рогатої худоби. Визначена область раціональних значень при яких досягається максимальна однорідність суміші. Отримано графічні залежності, які характеризують якісну роботу двосекційного комбінованого змішувача кормів. Improving of livestock industry efficiency significantly depends on quality of feed preparation, as they are in cost structure of products are 30-60% of costs. Advanced technologies that allow to fully realize genetic potential of animals, due to the lack of necessary technical support have not become widespread. The experience of using intensive full-system technologies for livestock production shows that, along with reliable and balanced provision of farms with high quality feeds, traditional feeding systems are being improved, which are aimed at the development of economically efficient mechanized feed processing technologies and the preparation of full-range and balanced feed mixtures. Existing designs of feed mixers for cattle do not fully meet the zootechnical requirements for the preparation of multicomponent balanced complete feed mixtures, have high energy costs and high specific material consumption. Therefore, research aimed at developing working bodies for feed mixers, which will ensure the creation of a highly efficient feed base at low energy and material costs are of economic importance and is an urgent scientific task. In the article on the basis of the conducted researches the basic constructive-technological scheme of the effective single-shaft two-section mixer for realization of process of preparation of balanced mixes for cattle executed in the form of the horizontally located cylindrical case with the combined mixer consisting of section of screw tapes and flat blades (left and right) direction of inclination, the working surface of which is located at an angle of 45… 500 to the axis of the shaft and is equipped with radial fingers. The purpose of experimental research was to establish identification of developed mathematical models and adequacy of research results of proposed feed mixer and determine impact of basic parameters and modes of its operation on quality process. Аchieve this goal, mutual influence of simultaneous changes in speed of agitator shaft, width of flat blade angle of blade to axis of agitator shaft and duration of feed mixing on quality process: homogeneity of mixture and drive power of mixer shaft. Theoretical studies of the process of preparation of a balanced complete ration mixture confirmed the advantage of the developed design of the combined two-section mixer and increased the quality index (homogeneity of the mixture) to 98%. В статье на основании проведения анализа существующих конструкций предложена новая схема двухсекционного ленточно-лопастного смесителя. Экспериментальные исследования определили влияние конструктивных и режимных параметров на качество приготовления кормосмеси для крупного рогатого скота. Определена область рациональных значений при которых достигается максимальная однородность смеси. Получены графические зависимости, характеризующие качественную работу двухсекционного комбинированного смесителя кормов.Item Обґрунтування раціонального співвідношення дугової довжини вакуумної камери та кількості комірок висівного диска пневмомеханічних вакуумних висівних апаратів(ЦНТУ, 2019) Осипов, І. М.; Сисоліна, І. П.; Осипов, И. Н.; Сысолина, И. П.; Osypov, I.; Sysolina, I.Встановлено, що значні резерви в підвищенні якості розподілу насіння сівалками з пневмомеханічними вакуумними висівними апаратами по площі живлення містяться в зменшенні пульсації величини розрідження в вакуумній камері за рахунок раціонального співвідношення її дугової довжини та кількості комірок висівного диска. Запропоновано математичний вираз для визначення пріоритетного ряду кількості комірок висівного диска для висівних апаратів з певною дуговою довжиною вакуумної камери. Результати теоретичних досліджень експериментально підтверджені в лабораторних умовах. Установлено, что значительные резервы в повышении качества распределения семян сеялками с пневмомеханическими вакуумными высевающими аппаратами по площади питания имеются в уменьшении пульсации величины разрежения в вакуумной камере за счет рационального соотношения ее дуговой длины и количества ячеек высевающего диска. Предложена математическая формула определения приоритетного ряда количества ячеек высевающего диска высевающих аппаратов с определенной дуговой длиной вакуумной камеры. Результаты теоретических исследований экспериментально подтверждены в лабораторных условиях. Considerable backlogs in upgrading of distribution of seed by seeders with pneumomassage vacuum seedmeters areally feed are contained in reduction of pulsation of size of rarefaction in a vacuum chamber. One of reasons of such pulsation is dependence of coefficient of hydraulic resistance of vehicles on the amount of cells of sowing disk, being in the zone of a vacuum chamber. Influence of this dependence is special strongly shows up at sowing of large seed sowing disks with the cells of large-break, and also in pneumomassage seedmeters with small angular length of a vacuum chamber. Thus, in the pneumomechanical seeding machine of the SUPN-8A seeder, the angular value of the vacuum chamber is 2700. When using a seeding disk with 14 cells that are evenly spaced in a circle, 10 or 11 cells are in the area of the vacuum chamber at different points in time. It results in a decrease (11 cells) or an increase (10 cells) of the vacuum in the vacuum chamber. The condition of being of permanent amount of cells of sowing disk in the zone of a vacuum chamber is set and the priority row of amount of cells is got for the pneumomassage seedmeters of a vacuum type with the fixed angular length of a vacuum chamber. Taking into account the requirement, a priority number of cells of the seeding disk of pneumomechanical seeding devices of vacuum type with an angular value of vacuum chamber 270º was obtained: 4, 8, 12, 16, 20, 24, 28, etc. Experimental verification of working hypothesis and formed mathematical model confirmed their adequacy. Quality indexes of work of seedmeter with offer disks higher than indexes during work of seedmeter with serial disks. The coefficient of variation of unevenness of distribution of seed along a row went down from 55-73% to 37-48%. For the pneumomassage seedmeters of a vacuum type with the fixed angular length of a vacuum chamber, rational correlation of angular length of a vacuum chamber and amount of cells of sowing disk it is necessary to count such at that there is simultaneous included of one cell in the zone of a vacuum chamber and exit of other cell from the zone of a vacuum chamber. For a pneumomassage vacuum seedmeter with angular length of a vacuum chamber 270º a rational amount of cells is 16 and 24 units.Item Вдосконалення конструкції дозатора кормів грабельного типу(ЦНТУ, 2019) Кісільов, Р. В.; Лузан, П. Г.; Сисоліна, І. П.; Лузан, О. Р.; Кисилев, Р. В.; Лузан, П. Г.; Сысолина, И. П.; Лузан, Е. Р.; Kisilyov, R.; Luzan, P.; Sysolina, I.; Luzan, O.В статі проведений аналіз літературних досліджень і наукових публікацій по дозуванню кормів та запропонована нова конструкція вертикального транспортерного бункерного відокремлюючого дозатора, який обладнаний круглоланковим ланцюгом і гребінками з пальцями. Теоретично обґрунтовано конструктивні параметри, функціонально-технологічна схема на базі бункера-дозатора БДК-Ф-70-20, режими роботи робочих органів, крок встановлення гребінок, довжина пальців гребінки та приведені особливості розвантаження кормів дозатором на поперечний горизонтальний транспортер-дозатор (друга ступінь дозування). В статье проведен анализ литературных исследований и научных публикаций по дозированию кормов и предложена новая конструкция вертикального транспортерного бункерного отделяющего дозатора, который оборудован круглозвенной цепью и гребенками с пальцами. Теоретически обоснованы конструктивные параметры, функционально-технологическая схема на основе бункера-дозатора БДК-Ф-70-20, режимы рабочих органов, шаг установки гребенок, длина пальцев гребенки и приведены особенности разгрузки кормов дозатором на поперечный горизонтальный транспортер-дозатор (вторая ступень дозирования). The experience of using intensive full-system technologies for livestock production shows that, along with reliable and balanced provision of farms with high quality feeds, traditional feeding systems are being improved, which are aimed at the development of economically efficient mechanized feed processing technologies and the preparation of full-range and balanced feed mixtures. In the article, an analysis of literary research and scientific publications on the dosage of feed by rotary biota. This process showed that the transporter-bitumen dosing working element of the type-type has significant drawbacks, which are due to the imperfection of its construction, the negative effects of centrifugal forces and the circular efforts of the fingers of the comb, the unevenness of the conveyor supply, the density and the surface of the loaded bark in the bunker, the lagging or slipping of the feed relative to conveyor, by reducing the transverse area of the monolith when unloading feed from the bunker. Disadvantages of bitumen dispensers can be eliminated if the rotary motion of the comb edges in the feed monolith is replaced by the translational motion of the vertical chain separating conveyor. When using such a dispenser, the quality of the dosage increases, the energy intensity of the process decreases, and the unwanted negative forces of inertia and the circular effort of the fingers of the bitumen dispenser are completely excluded. In the article the analysis of literary researches and scientific publications is conducted on the dosage of forages and the new construction of vertical conveyer bunker separating metering device which is equipped chain and combs with fingers is offered. Structural parameters, functionally-technological chart on the basis of bunker-metering device of BDK-F-70-20, modes of workings organs, step of setting of combs, are grounded in theory, length of fingers of comb and the features of unloading of forages a metering device are resulted on a transversal horizontal conveyer-metering device (second stage of dosage) The theoretical studies of the feed dosing process have confirmed the advantage of the developed design of the improved vertical chain-flat conveyor feeder of the comb type and improved the quality of the separation of the feed monolith by the working bodies of the conveyor.Item Проблемні аспекти та перспективи інноваційного розвитку сільськогосподарського машинобудування(ЦНТУ, 2018) Сисоліна, Н. П.; Савеленко, Г. В.; Сисоліна, І. П.; Сысолина, Н. П.; Сысолина, И. П.; Sysolina, N.; Savelenko, Н.; Sysolina, І.В статті досліджено сучасні умови функціонування підприємств сільськогосподарського машинобудування, виявлено проблеми, з якими вони стикаються та які уповільнюють їх розвиток, окреслено можливі перспективні засади управління та запропоновано нові підходи щодо підвищення конкурентоспроможності таких підприємств. Обґрунтовано необхідність державної підтримки вітчизняних підприємств сільськогосподарського машинобудування на мезо- та макрорівнях. На основі дослідження комплексу показників побудовано модель механізму інноваційного розвитку. В статье исследованы современные условия функционирования предприятий сельскохозяйственного машиностроения и выявлены проблемы, замедляющие их развитие, а также намечены возможные перспективные основы управления и предложены новые подходы по повышению конкурентоспособности таких предприятий. Обоснована необходимость государственной поддержки отечественных предприятий сельскохозяйственного машиностроения как на мезо-, так и макроуровнях. На основе исследования комплекса показателей построена модель механизма инновационного развития. At the present stage, domestic agricultural machine building does not correspond to innovative development. The purpose of the article is to study the main tendencies and substantiation of approaches to increase competitiveness of agricultural machinery enterprises. In the article the modern conditions of functioning of agricultural machinery enterprises are investigated and the problems, with which they encounter, which slow down their development, are revealed. It also outlines possible perspective management principles and proposes new approaches to improving the competitiveness of agricultural machinery enterprises. It was established that the state does not pay enough attention to the issue of updating the technological equipment of agricultural machinery enterprises, introducing the achievements of scientific and technological progress in the production of domestic agricultural machinery. The necessity of developing a new state program of support of domestic enterprises of agricultural machine-building at the meso- and macro levels was substantiated. The necessity of reorientation of agricultural machine-building enterprises for the production of modern high-tech equipment, which corresponds to world standards and can compete with foreign analogues, is indicated as it is the main way to enter international markets of agricultural machinery and preservation of the national consumer. On the basis of research of a complex of indicators, the model of the mechanism of innovation development is constructed. Currently, increasing the competitiveness of agricultural machinery enterprises is possible only if two basic conditions are met: the introduction of innovative technologies into production and the effective state program of development of the industry. Enterprises need to implement a comprehensive mechanism for increasing innovation development, since it is from the management of the internal activity of the enterprise will depend on the effective performance of the entire enterprise.Item Про причини нерівномірності висіву шнековими туковисівними апаратами(КНТУ, 2009) Сисоліна, І. П.; Sysolina, І.У статті приведені результати теоретичних досліджень по визначенню нерівномірності розподілу добрив у рядку, а також висвітлено основні принципи роботи шнекових туковисівних апаратів різної конструкції. Розроблена теоретично обгрунтована математична модель руху частки добрив та осьового переміщення нижніх точок шнека, для подальшого визначення напрямів покращення якості висіву добрив. In the article it is resulted of the theoretic researches of determination of unevenness of distributing of fertilizers is resulted in a line, and main principles of work of diversity design of screw devices of fertilizers are stated. For determination of the means of improvement quality of sown of fertilizers, the in theory grounded mathematical is developed model of movement of part of fertilizers and lengthwise of movement of lower pointes of screw.Item Результати попередніх досліджень шнекового туковисівного апарата АТП-2(КНТУ, 2008) Осипов, І. М.; Рева, О. М.; Сисоліна, І. П.У статті приведені результати дослідження по визначенню рівномірності розподілу добрив у рядку. In the article it is resulted of the research of determination of evenness of distributing of fertilizers is resulted in a line.Item Використання інформаційних технологій в процесі регулювання доходів населення(КНТУ, 2006) Саловська, Л. В.; Липчанський, В. О.; Сисоліна, І. П.В статті розглянуто сучасні тенденції інформатизації суспільства та їх вплив на механізм регулювання доходів населення. Проаналізовано класичну цільову спрямованість втручання держави в економіку країни. In the article the modern tendencies of informatization of society and their influence are considered on the mechanism of adjusting of profits of population. The analysis of classic having a special purpose orientation of intervention from the state in the economy of country is conducted.Item Обгрунтування параметрів дозуючого пристрою до шнекового туковисівного апарата(КНТУ, 2011) Осипов, І. М.; Амосов, В. В.; Сисоліна, І. П.; Оsipоv, І.; Аmоsоv, V.; Sysolina, I.У статті приведені результати теоретичних досліджень основних параметрів нового вирівнюючого пристрою (дозатора) шнекового туковисівного апарату, а саме: кути підіймання туків циліндричною та конічною поверхнями кільця висівного диска, вплив діючих сил на кут підйому туків конічним кільцем диска, продуктивність висівного вікна, а також конструкція дозатора та принцип його роботи, що показали спроможність дозатора сприяти покращенню рівномірності розподілу добрив у рядку. The results of theoretical researches of basic parameters of new leveler device (metering device) of screw devices of fertilizers are resulted in the article, namely: corners of raising of fertilizers by the cylindrical and conical surfaces of ring of sowing disk, influence of operating forces on the corner of raising of fertilizers the conical ring of disk, the productivity of sowing window, and also construction of metering device and principle, is his works, which rotined possibilities of metering device to be instrumental in the improvement of equitability fertilizers in a line.Item Інноваційний менеджмент та перспективи його розвитку(КНТУ, 2011) Сисоліна, Н. П.; Кононенко, Л. В.; Сисоліна, І. П.; Sysolina, N.; Kononenko, L.; Sysolina, I.У статті розглянуто історичний аспект інноваційного розвитку, визначено роль, сутність та завдання інноваційного менеджменту в процесі управління створенням та просуванням (комерціалізацією) інновацій, приведені результати теоретичних досліджень стосовно факторів сприятливого інноваційного клімату. In the article is considered historical aspect of development of scientific and technical progress, certainly role, essence and task of innovative management, in the process of management creation and advancement (commercialization) of innovations, resulted results of theoretical researches in relation to the factors of favourable innovative climate.