Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
4 results
Search Results
Item Вплив технологічних параметрів процесу розмірної обробки електричною дугою на шорсткість робочої поверхні спряжених пар робочих деталей розділових штампів(КНТУ, 2009) Носуленко, В. І.; Шмельов, В. М.; Nosulenko, V.; Shmelyov, V.В статті описано вплив технологічних параметрів процесу РОД: сили технологічного струму /, що змінюють в межах від 100А до 400А; статичного тиску робочої рідини Ps, що змінюють в межах від ІМПа до 1,4МПа; висоти робочого пояска графітового електрод-інструмента h, що змінюють в межах від 0,5мм до 1,5мм, на шорсткість робочих поверхонь робочих деталей розділових штампів Ra, та доведено можливість застосування способу РОД в сукупності з СКЗ ЕІ для виготовлення спряжених пар робочих деталей розділових штампів. In article influence of technological parametres of process of dimensional processing by an electric arch is described: forces of a technological current /, changing in limits from 100A to 400A; static pressure of the working liquid Ps, changing in limits from IMPa to l,4MPa; heights of a working belt of the graphite electrodetool h, changing in limits from 0,5mm to 1,5mm, on a roughness of working surfaces of working details of dividing stamps Ra, also possibility of application of a way of dimensional processing by an electric arch in aggregate in the way of operated deterioration an electrode-tool for manufacturing of conjugating pairs working details of dividing stamps is proved.Item Оптимізація якісних характеристик поверхонь робочих деталей розділових штампів в умовах розмірної обробки електричною дугою(КНТУ, 2014) Шмельов, В. М.; Shmelyov, V.Виконано оптимізацію якісних характеристик поверхонь робочих деталей розділових штампів в умовах розмірної обробки електричною дугою (РОД). Показано залежність між конструкцією матриці і необхідною шорсткістю її робочої поверхні. Описано залежності якості обробленої поверхні робочих деталей розділових штампів від технологічних характеристик процесу РОД. The paper purpose-optimisation of qualitative performances of a surface of working details dividing ofstamps in the conditions of dimensional processing the electric arc. In a paper the analyzes of a construction of the matrix and a necessary surface roughness of working details of separating dies is carried out, on the basis of this gives recommended roughnesses of surfaces of working details received by methods of a classical electrical discharge machining. On the basis of experimental data derived the mathematical model of a surface roughness of working details dividing of stamps depending on the basic technical characteristics on process of dimensional processing the electric arc. It is shown that the surface roughness of working details dividing of stamps received by a mode of dimensional processing the electric arc, corresponds to the recommended surface roughness of these details received by classical methods of an electroerosion machining. Use of a mode of dimensional handling by an electric arc allows to receive working details of separating dies of the necessary sizes and with necessary indexes of a surface roughness of the worker of a part, and accordingly and to ensure necessary firmness, and lowering of the cost price of their manufacture. Using the method of dimensional processing the electric arc allows to receive of working details dividing of stamps the necessary sizes and with necessary indexes of a surface roughness of the worker of a part, and according to ensure necessary firmness, and lowering of the cost price of their manufacture.Item Особливості фізичного механізму електричної ерозії в умовах розмірної обробки електричною дугою спряжених пар робочих деталей розділових штампів(КНТУ, 2011) Шмельов, В. М.; Shmelyov, V.Описано особливості фізичного механізму електричної ерозії, зокрема якісні характеристики джерел тепла на електродах, в умовах розмірної обробки електричною дугою спряжених пар робочих деталей розділових штампів. Показано, що за зазначених умов забезпечуються оптимальні характеристики поверхні робочих деталей розділових штампів, такі як шорсткість обробленої поверхні і зона термічного впливу та точність виготовлення спряжених деталей. Features of physical mechanism of electric erosion are, in particular high-quality descriptions of sources of heat on electrodes, in the conditions of size treatment of the attended pair of workings details of dividing stamps a voltaic arc. It is shown, that under the specified conditions optimum characteristics of a surface of working details of dividing stamps, such as a roughness of the processed surface and a zone of thermal influence, and also accuracy of anufacturing of interfaced details are provided.Item Розділовий штамп суміщеної дії з моноблочною матрицею-пуансоном(КНТУ, 2010) Носуленко, В. І.; Шмельов, В. М.; Nosulenko, V.; Shmelyov, V.В статті описано конструкцію розділового штампу суміщеної дії для вирубування-пробивання з моноблочною матрицею-пуансоном, наведено його переваги порівняно із розділовими штампами суміщеної дії для вирубування-пробивання, виготовленими за традиційними технологіями. In the article the construction of dividing stamp of the combined action is described for felling-holing with a monoblock matrix-puncheon, advantages of such stamp are resulted by comparison to the dividing stamps of the combined action for felling-holing, made for traditional technologies.