Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
4 results
Search Results
Item Критерії вибору великовагових транспортних засобів для ефективних і безпечних перевезень(ЦНТУ, 2024) Аулін, В. В.; Тертиця, О. М.; Надич, Т. М.; Гриньків, А. В.; Ляшук, О. Л.; Гудь, В. З.; Залуцький, С. З.; Aulin, V.; Tertytsia, O.; Nadych, T.; Hrynkiv, A.; Lyashuk, O.; Gud, V.; Zalutsky, S.Визначено етапи вибору великовагових транспортних засобів для безпечного перевезення продукції підприємства. Обґрунтовано технічні, організаційні та економічні критерії. Враховано габаритні та вагові параметри, обмеження навантаження на вісь, а також типи комплектації (шторна, бортова, фургон/рефрижератор). Розглянуто дев’ять варіантів із позиціонуванням центру ваги. Запропоновано механізм вибору транспорту за технічною готовністю та економічною ефективністю. Виконано ранжування, з якого обрано три оптимальні варіанти для перевезень підприємства ЗАТ "Кіровоградграніт". The work defines the stages of solving the problem of choosing heavy-duty vehicles for the effective and safe transportation of the enterprise's products. Technical, organizational and economic (market) criteria for choosing vehicles are formed and substantiated.Item Оптимальний комплекс операцій технічного обслуговування і ремонту для підвищення надійності вузлів, систем та агрегатів мобільних машин(ЦНТУ, 2023) Аулін, В. В.; Ляшук, О. Л.; Гриньків, А. В.; Лисенко, С. В.; Міронов, Д. В.; Слободян, Л. М.; Рогатинський, Р. М.; Aulin, V.; Liashuk, O.; Hrinkiv, A.; Lysenko, S.; Mironov D.; Slobodian, L.; Rogatynskyi, R.В роботі розглядаються удосконалення форм та методів організації систем технічного обслуговування і ремонту мобільних машин для підвищення їх надійності оптимізацією операцій діагностування та контролю технічного стану їх вузлів, систем і агрегатів. The work examines the improvement of the forms and methods of organizing maintenance and repair systems of mobile machines in order to increase their reliability by optimizing diagnostic operations and monitoring the technical condition of their units, systems and units.Item Модель надійності деталей транспортних машин за процесами реалізації триботехнологій їх припрацювання і відновлення(ЦНТУ, 2019) Аулін, В. В.; Лисенко, С. В.; Гриньків, А. В.; Аулин, В. В.; Лысенко, С. В.; Гринькив, А. В.; Aulin, V.; Lysenko, S.; Grinkiv, A.Обґрунтована необхідність побудови фізичних та математичних моделей надійності з врахуванням випадкових процесів та кількості локальних областей при зношуванні та відновленні з використанням триботехнологій припрацювання та відновлення. Дана модель поверхневого шару деталі з k підшарів. Розглянуто поведінку системи "поверхневий шар" з точки зору надійності, як поведінку системи сукупностей взаємозалежних локальних областей контактів. Стохастична модель надійності деталі зведена до системи поверхневих шарів з випадковими локальними областями контактів спряжених деталей. Наведено граф станів псевдосистеми "поверхневий шар" при різних умовах. Отримано систему стохастичних диференціальних рівнянь для розгляду процесів деградації та відновлення псевдостанів та наведено часткові її розв'язки. Обоснована необходимость построения физических и математических моделей надежности с учетом случайных процессов и количества локальных областей при износе и восстановлении с использованием триботехнологий приработки и восстановления. Данная модель поверхностного слоя детали из k подслоев. Рассмотрены поведение системы "поверхностный слой" с точки зрения надежности, как поведение системы совокупностей взаимосвязанных локальных областей контактов. Стохастическая модель надежности детали сведена к системе поверхностных слоев со случайными локальными областями контактов сопряженных деталей. Приведен граф состояний псевдосистемы "поверхностный слой" при различных условиях. Получена система стохастических дифференциальных уравнений для рассмотрения процессов деградации и восстановления псевдосостояний и приведены частичные ее решения. The necessity of building physical and mathematical models of reliability with the consideration of random processes and the number of local areas during wear and restoration using tribotechnologies of working out and restoration is substantiated. The change of states of systems of a surface layer and a part as a whole is presented in the form of graphs for cases of research of processes of wear and restoration and their consideration as systems. Technical states are represented as discrete sets. A pseudostate method was used to build the reliability model and a graph was developed that combined processes of wear and restoration of surface layers of parts. The surface model of the workpiece consists of k sublayers. The behavior of the surface layer system is considered in terms of reliability as the behavior of a system of sets of interdependent local contact areas. The stochastic model of part reliability is reduced to a system of surface layers with random local contact areas of conjugated parts. The graph of the pseudostates of the surface layer system under different conditions is given. A system of stochastic differential equations is obtained to consider the processes of degradation and reconstruction of pseudostates and give partial solutions to it. Three partial cases of non-stationary wear and restoration of the surface layer system are considered: the intensity of these processes in the local contact areas of the surface layer do not depend on their working quantity, but are only a function of time; the intensity of wear and tear in local contact areas is independent of the number of them working at a given time; the wear and tear intensity is a function of time and number of working contacts. It is determined that the efficiency of the process of solving problems, reflected in partial cases, is significantly increased when using the mathematical apparatus of Markov chains.Item Розв’язання проблеми надійності технологічних процесів вантажних перевезень підприємствами агропромислового виробництва(ЦНТУ, 2019) Аулін, В. В.; Голуб, Д. В.; Великодній, Д. О.; Дьяченко, В. О.; Аулин, В. В.; Голуб, Д. В.; Великодный, Д. О.; Дьяченко, В. О.; Aulin, V.; Holub, D.; Velykodniy, D.; Dyachenko, V.Розроблено структурно-функціональні схеми технологічного процесу перевезень в агропромисловому виробництві на прикладі транспортування зерна на експорт підприємством виробником. Виявлено взаємодію автомобільного транспорту з іншими видами транспорту в цьому процесі. Запропоновано різні варіанти реалізації структурно-функціональних схем процесу перевезення зерна та проаналізовано їх елементи як технологічні операції. Дана оцінка ймовірності безвідмовної роботи при реалізації технології перевезення зерна на експорт від кількості структурних елементів і запропоновані варіанти структурно-функціональної схеми. Виявлено, що структуризація процесу перевезень у вигляді послідовності взаємодії його учасників дозволяє вирішити завдання зниження кількості структурних елементів функціонально-структурної схеми і відповідно підвищити надійність транспортних систем. Разработаны структурно-функциональные схемы технологического процесса перевозки в агропромышленном производстве на примере транспортировки зерна на экспорт предприятием производителем. Выявлено взаимодействие автомобильного транспорта с другими видами транспорта в этом процессе. Предложены разные варианты реализации структурно-функциональных схем процесса перевозки зерна и проанализированы их элементы как технологические операции. Дана оценка вероятности безотказной работы при реализации технологии перевозки зерна на экспорт от количества структурных элементов и варианта структурно-функциональной схемы. Выявлено, что структуризация процесса перевозок в виде последовательности взаимодействия его участников позволяет решить задачу снижения количества структурных элементов функционально-структурной схемы и соответственно повысить надежность транспортных систем. The interaction of road transport with other modes of transport in the complex transport system of transportation of grain for export is revealed. Different variants of realization of structural-functional scheme of grain transportation process are constructed, their elements are analyzed in the form of technological operations. The estimation of the probability of failure-free operation from the number of structural elements of the structural-functional scheme of the reliability of the transport system is given. It is shown that the direct transport scheme of transportations is more reliable than the transport-warehouse scheme. It was revealed that the presence of auxiliary or providing technological operations significantly increases the number of structural elements of the transport system reliability scheme. The condition of maintenance and increase of reliability typical for the transport system of transportation of cargoes and passengers is formulated and participation of participants of processes of transportations under conditions of outsourcing is clarified. Different combinations of participants of the transportation process are considered and the procedure for determining their number is developed. It is shown that the structuring of the process of transportation of cargoes and passengers in the form of a sequence of interaction of its participants, and not as a sequence of technological operations, allows us to solve the problem of reducing the number of structural elements of the functional and structural scheme of the reliability of transport systems. The analysis of the criteria for the selection of participants in the transport process and their grouping according to the timeliness of the provision of transportation orders, the attractiveness of commercial terms of interaction, the range of transport services, and the reliability of interaction with subcontractors are determined. The concept of criteria for establishing organizational relationships between the participants in the transportation process, which are ordered by contractual relations, is clarified. The scheme of the relationship of the type of contractual relations with the level of reliability of transport systems is presented. It is shown that a reliable assessment of reliability involves detailing the process of transportation in sections, requiring the use of quantitative criteria. The algorithm of optimization of the structural-functional scheme of reliability of the transport system is constructed, in which the sequence of application of the approach of providing and increasing reliability by optimizing the number of structural elements is presented.