Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
6 results
Search Results
Item Метод синтезу оптимального багатовимірного фільтру для виділення регулярного сигналу на фоні випадкових перешкод(ЦНТУ, 2021) Осадчий, С. І.; Дідик, О. К.; Сербул, О. М.; Каліч, В. М.; Osadchiy, S.; Didyk, O.; Serbul, O.; Kalich, V.В даній статті приводиться дослідження можливості застосування комплексування вимірювальної інформації в умовах, коли корисна інформація являє собою вектор регулярних сигналів, а завади вимірювання – багатовимірний стаціонарний випадковий процес. In terms of [1] we formulate the problem of synthesis of a complex system of allocation of a useful regular signal. Suppose that a multidimensional stationary filter best processes the input information about the same regular signal r(t), which is obtained by several "non-ideal" meters, and the result is transmitted to the evaluation system. In this article, a multi-channel measurement system, which is connected to the input of a multidimensional data transmission system, the dynamics of which is described by a system of linear differential equations. The input of the measuring system receives an n-dimensional vector of measured signals r (t), the components of which are deterministic functions. The vector r (t) belongs to the main group of "non-ideal" meters. Measurements are accompanied by interference, which is a random stationary process with zero mathematical expectation and a known fractional-rational matrix of spectral densities. An integral indicator of the quality of the system is the sum of the weighted integral quadratic error of the regular signal estimation and the variance of the random component of the error. Thus, a new algorithm for the synthesis of a complete optimal regular signal extraction system against the background of a multidimensional stationary random interference is obtained, which allows to find the structure and parameters of a multidimensional optimal filter taking into account the dynamics of the information transmission system.Item Система автоматичного регулювання співвідношення тверде/рідке в млинах з циркулюючим навантаженням(ЦНТУ, 2021) Кондратець, В. О.; Сербул, О. М.; Дідик, О. К.; Мацуй, А. М.; Kondratets, V.; Serbul, O.; Didyk, O.; Matsui, A.В статті приведені проміжні результати розробки і випробування системи автоматичного регулювання співвідношення тверде/рідке в кульових млинах, що працюють зі спіральними механічними класифікаторами в замкнутому циклі. The operation of a ball mill operating in a closed loop with a spiral classifier depends on the vacuum of the pulp in it, which is characterized by a solid / liquid ratio. Supply to the entrance of the ball mill at the same time ore and sand classifier, as well as changes in the circulating load in a wide range greatly complicate the definition of this technological parameter. This situation has led to the fact that the solid / liquid ratio in mills operating in such conditions can not be automatically adjusted, in turn, the deviation of the pulp vacuum from the required value leads to significant losses. The study of the ball mill as a controlled object on the pulp vacuum channel made it possible to describe it using the mathematical expression given in the article. The solution of this expression makes it possible to characterize the change in the mass of the material in the mill over time, provided that a stepwise action is introduced at the entrance - the volume flow of water or ore. A constant value of the mass of material in the mill will clearly characterize the corresponding solid/liquid ratio. It has been found that it is important to study the filtering capabilities of the control object, as control actions on water and disturbing actions on ore can significantly change the vacuum of the pulp in some areas of the mill. The filtering capabilities of the mill can be investigated by its amplitude frequency characteristics, which showed that at low circular frequencies the amplitude frequency characteristics depend on the mode of operation of the mill - the magnitude of the circulating load and the cost of the source ore. Using computer technology, spatial diagrams of the relative oscillations of the mass of material in the mill from the amplitude and frequency of influences at its entrance through the ore and water. In the course of theoretical research it was determined that the only approach to ensure the required accuracy of determining the solid / liquid ratio in these conditions is to filter the signals before applying to the input of the identification unit of the ratio. Thus, the system of automatic control of the solid/liquid ratio at the entrance to the mill is implemented on microprocessor means. Its operation on the laboratory test bench made on the microcontroller showed high accuracy of stabilization of technological parameter, reliability in various conditions of change of characteristics of input signals.Item Ідентифікація лінеаризованої моделі динаміки контролера та терморегулювального вентилю фірми Danfoss за даними пасивного експерименту(ЦНТУ, 2018) Лужков, Д. М.; Осадчий, С. І.; Дідик, О. К.; Осадчий, С. И.; Дидык, А. К.; Luzshkov, D.; Osadchy, S.; Didyk, O.Мета статті полягає у забезпеченні конструкторів та дослідників роботи систем автоматизації процесу керування холодильним обладнанням з одним терморегулювальним вентилем вихідними даними про лінеаризовану модель динаміки контролера разом з регулювальним органом. Ідентифікація виконана у три етапи. На першому етапі на основі даних пасивного експерименту одержані спектральні та взаємні спектральні щільності сигналів. На другому етапі, на основі результатів першого, визначені передаточні функції елементів системи та формуючого фільтру завад. На третьому етапі виконана верифікація результатів ідентифікації, при якій використовувались експериментальні дані та одержані передаточні функції на другому етапі. Цель статьи заключается в обеспечении конструкторов и исследователей работы систем автоматизации процесса управления холодильным оборудованием с одним терморегулирующим вентилем исходными данными о линеаризованной модели динамики контроллера вместе с регулирующим органом. Идентификация выполнена в три этапа. На первом этапе на основе данных пассивного эксперимента полученные спектральные и взаимные спектральные плотности сигналов. На втором этапе, на основе результатов первого, определены передаточные функции элементов системы и формирующего фильтра помех. На третьем этапе выполнена верификация результатов идентификации, при которой использовались экспериментальные данные и полученные передаточные функции на втором этапе. Main purpose of the article is to provide designers and researchers with a dynamics models of a controller for refrigerating equipment with one thermal control valves in conjunction with a regulatory body.. This article is devoted to an analysis of the trends improve refrigeration efficiency by upgrading the control system of a thermostatic expansion valve. It is shown that Danfoss refrigeration equipment increases the efficiency of the formation of the cold due to changes in the evaporator superheat setting. The main idea of upgrading is to use a systems approach to the consideration of refrigeration equipment in conjunction with the cooling chamber and the products which are stored in it. To realize this idea one has developed a new block diagram of the cooling system as a multidimensional follow-up system that operates in conditions of air temperature changes in the refrigerating chamber and fluctuations of the refrigerant temperature and its pressure. The definition of a linearized model took place in three stages. In the first stage, based on the data of the passive experiment, spectral and cross spectral densities of signals are obtained. In the second stage, based on the results of the first, the transfer functions of the system elements and the filtering block are defined. In the third stage, the verification of the identification results, which used experimental data and received transfer functions in the second stage, was performed. The separation of the signal records that are active at the inputs and outputs of the AK-CC 550 controller and Danfoss thermostat valve allows you to determine the linearized pattern of the dynamics of the specified elements, which corresponds to the mode of operation of these elements during the recording of signals. The new transfer functions obtained form the basis for adapting the known methods of synthesis of control systems to the definition of the structure and parameters of the law of control, which is aimed at improving the efficiency of the use of cold in real operating conditions.Item Аналіз якості автоматизованої системи стабілізації потоку хлібної маси зернозбирального комбайну(КНТУ, 2012) Свірень, М. О.; Дідик, О. К.; Мірошніченко, М. С.; Sviren, M.; Didyk, O.; Miroshnichenko, M.В статті розглянутий аналіз якості автоматизованої системи стабілізації потоку хлібної маси зернозбирального комбайну при різних значеннях вагового коефіцієнту, що входить в критерій якості та встановлена залежність показників якості від вагового коефіцієнту. This article describes the automated analysis of the quality of the stabilization system of grain mass flow combine harvester at different weighting coefficients in the quality system and the dependence of the quality of the weights.Item Ідентифікація динаміки зміни урожайності поля в якості збурення, що діє в автоматизованій системі стабілізації потоку хлібної маси зернозбирального комбайну(КНТУ, 2012) Свірень, М. О.; Дідик, О. К.; Мірошніченко, М. С.; Sviren, M.; Didyk, O.; Miroshnichenko, M.В статті розглянуті результати оцінки спектральної щільності зміни урожайності зернових по ходу руху комбайну за відомою картографічною інформацією на класі дробово-раціональних функцій комплексного аргументу. In the article the considered results of estimation of spectral closeness of change of the productivity grain-growing on motion of combine on the known cartographic information on the class of shot-rational functions of complex argument.Item Ідентифікація параметрів динаміки руху зернозбирального комбайну за даними експерименту(КНТУ, 2010) Дідик, О. К.; Віхрова, М. С.; Didyk, O.; Vihrova, M.За результатами експериментального дослідження гальмівних систем зернозбирального комбайна КЗС-9 «Славутич», проведеного на базі Південно-Української філії УкрНДІПВТ ім. Л. Погорілого, одержано функціональну залежність гальмівного шляху комбайна від початкової швидкості, маси, гальмівного зусилля і коефіцієнта динаміки комбайна та визначені динамічні характеристики прямолінійного руху зернозбирального комбайна. On results experimental research of the brake systems of combine harvester KZS-9 «Slavutich», the conducted South-Ukrainian branch on a base UkrNIIPVT the name of L. Pogorelogo, is collected functional dependence of braking distance of combine from initial velocity, mass, brake effort and coefficient of dynamics of combine and dynamic descriptions of rectilineal motion of combine harvester are definite.