Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
5 results
Search Results
Item Дослідження двосекційного змішувача для приготування збалансованих сумішей на фермах ВРХ(ЦНТУ, 2020) Кісільов, Р. В.; Хмельовський, В. С.; Лузан, П. Г.; Сисоліна, І. П.; Kisilyov, R.; Khmelevsky, V.; Luzan, P.; Sysolina, I.; Кисилев, Р. В.; Хмелевский, В. С.; Сысолина, И. П.У статті на підставі проведено аналізу існуючих конструкцій запропоновано нову схему двосекційного стрічково-лопатевого змішувача. Експериментальні дослідження визначили вплив конструктивних і режимних параметрів на якість приготування кормосуміші для великої рогатої худоби. Визначена область раціональних значень при яких досягається максимальна однорідність суміші. Отримано графічні залежності, які характеризують якісну роботу двосекційного комбінованого змішувача кормів. Improving of livestock industry efficiency significantly depends on quality of feed preparation, as they are in cost structure of products are 30-60% of costs. Advanced technologies that allow to fully realize genetic potential of animals, due to the lack of necessary technical support have not become widespread. The experience of using intensive full-system technologies for livestock production shows that, along with reliable and balanced provision of farms with high quality feeds, traditional feeding systems are being improved, which are aimed at the development of economically efficient mechanized feed processing technologies and the preparation of full-range and balanced feed mixtures. Existing designs of feed mixers for cattle do not fully meet the zootechnical requirements for the preparation of multicomponent balanced complete feed mixtures, have high energy costs and high specific material consumption. Therefore, research aimed at developing working bodies for feed mixers, which will ensure the creation of a highly efficient feed base at low energy and material costs are of economic importance and is an urgent scientific task. In the article on the basis of the conducted researches the basic constructive-technological scheme of the effective single-shaft two-section mixer for realization of process of preparation of balanced mixes for cattle executed in the form of the horizontally located cylindrical case with the combined mixer consisting of section of screw tapes and flat blades (left and right) direction of inclination, the working surface of which is located at an angle of 45… 500 to the axis of the shaft and is equipped with radial fingers. The purpose of experimental research was to establish identification of developed mathematical models and adequacy of research results of proposed feed mixer and determine impact of basic parameters and modes of its operation on quality process. Аchieve this goal, mutual influence of simultaneous changes in speed of agitator shaft, width of flat blade angle of blade to axis of agitator shaft and duration of feed mixing on quality process: homogeneity of mixture and drive power of mixer shaft. Theoretical studies of the process of preparation of a balanced complete ration mixture confirmed the advantage of the developed design of the combined two-section mixer and increased the quality index (homogeneity of the mixture) to 98%. В статье на основании проведения анализа существующих конструкций предложена новая схема двухсекционного ленточно-лопастного смесителя. Экспериментальные исследования определили влияние конструктивных и режимных параметров на качество приготовления кормосмеси для крупного рогатого скота. Определена область рациональных значений при которых достигается максимальная однородность смеси. Получены графические зависимости, характеризующие качественную работу двухсекционного комбинированного смесителя кормов.Item Вдосконалення конструкції дозатора кормів грабельного типу(ЦНТУ, 2019) Кісільов, Р. В.; Лузан, П. Г.; Сисоліна, І. П.; Лузан, О. Р.; Кисилев, Р. В.; Лузан, П. Г.; Сысолина, И. П.; Лузан, Е. Р.; Kisilyov, R.; Luzan, P.; Sysolina, I.; Luzan, O.В статі проведений аналіз літературних досліджень і наукових публікацій по дозуванню кормів та запропонована нова конструкція вертикального транспортерного бункерного відокремлюючого дозатора, який обладнаний круглоланковим ланцюгом і гребінками з пальцями. Теоретично обґрунтовано конструктивні параметри, функціонально-технологічна схема на базі бункера-дозатора БДК-Ф-70-20, режими роботи робочих органів, крок встановлення гребінок, довжина пальців гребінки та приведені особливості розвантаження кормів дозатором на поперечний горизонтальний транспортер-дозатор (друга ступінь дозування). В статье проведен анализ литературных исследований и научных публикаций по дозированию кормов и предложена новая конструкция вертикального транспортерного бункерного отделяющего дозатора, который оборудован круглозвенной цепью и гребенками с пальцами. Теоретически обоснованы конструктивные параметры, функционально-технологическая схема на основе бункера-дозатора БДК-Ф-70-20, режимы рабочих органов, шаг установки гребенок, длина пальцев гребенки и приведены особенности разгрузки кормов дозатором на поперечный горизонтальный транспортер-дозатор (вторая ступень дозирования). The experience of using intensive full-system technologies for livestock production shows that, along with reliable and balanced provision of farms with high quality feeds, traditional feeding systems are being improved, which are aimed at the development of economically efficient mechanized feed processing technologies and the preparation of full-range and balanced feed mixtures. In the article, an analysis of literary research and scientific publications on the dosage of feed by rotary biota. This process showed that the transporter-bitumen dosing working element of the type-type has significant drawbacks, which are due to the imperfection of its construction, the negative effects of centrifugal forces and the circular efforts of the fingers of the comb, the unevenness of the conveyor supply, the density and the surface of the loaded bark in the bunker, the lagging or slipping of the feed relative to conveyor, by reducing the transverse area of the monolith when unloading feed from the bunker. Disadvantages of bitumen dispensers can be eliminated if the rotary motion of the comb edges in the feed monolith is replaced by the translational motion of the vertical chain separating conveyor. When using such a dispenser, the quality of the dosage increases, the energy intensity of the process decreases, and the unwanted negative forces of inertia and the circular effort of the fingers of the bitumen dispenser are completely excluded. In the article the analysis of literary researches and scientific publications is conducted on the dosage of forages and the new construction of vertical conveyer bunker separating metering device which is equipped chain and combs with fingers is offered. Structural parameters, functionally-technological chart on the basis of bunker-metering device of BDK-F-70-20, modes of workings organs, step of setting of combs, are grounded in theory, length of fingers of comb and the features of unloading of forages a metering device are resulted on a transversal horizontal conveyer-metering device (second stage of dosage) The theoretical studies of the feed dosing process have confirmed the advantage of the developed design of the improved vertical chain-flat conveyor feeder of the comb type and improved the quality of the separation of the feed monolith by the working bodies of the conveyor.Item Дослідження процесу приготування кормових сумішей для ВРХ комбінованим змішувачем(КНТУ, 2014) Кісільов, Р. В.; Лузан, П. Г.; Мачок, Ю. В.; Нестеренко, О. В.; Kisilyov, R.; Luzan, P.; Machok, Y.; Nesterenko, O.В статті проведений аналіз роботи і досліджень традиційних конструкцій змішувачів кормів, визначені напрямки вдосконалення процесу приготування кормових сумішей для ВРХ та запропонована нова конструкція комбінованого змішувача, принцип роботи якого пояснюється технологічними і розрахунковими схемами. The analysis of work and researches traditional constructions forage mixers is conducted in the article, directions of improvement process of preparation forage mixtures are certain for cows and the new combined mixer construction offers, principle of work that is explained by technological and calculation charts. Analysis of the mixing process showed that a state of complete mechanical mixing of components is achieved by disordered distribution of particles under the action of external forces working of the mixer in accordance with the requirements of zootechnical content components in all portions of the mixture with a prescription specified daily ration of feed for animals of appropriate technology. To eliminate the existing shortcomings of traditional mixers offered improved mixer with combined multisection scheme of raw material flow spiral, ribbon and flat blades. The share of each component of the mixture fall into the area of interaction of complex movements, intersections and collisions and periodically moved from one stream to another, providing intensive mass transfer and accelerates the process of mixing feed.Item Дослідження і розробка удосконаленої конструкції вертикального транспортерного дозатора кормів грабельного типу(КНТУ, 2010) Матвєєв, К. Д.; Кісільов, Р. В.; Матвєєва, В. О.; Лєснік, О. М.; Сергієнко, В. М.; Matveev, K.; Kisilyov, R.; Matveeva, V.; Lesnik, O.; Sergienko, A.В статі проведений аналіз літературних досліджень і наукових публікацій по дозуванню кормів та запропонована нова конструкція вертикального транспортерного бункерного відокремлюючого дозатора, який обладнаний круглоланковим ланцюгом і гребінками з пальцями. Теоретично обґрунтовано конструктивні параметри, функціонально-технологічна схема на базі бункера-дозатора БДК-Ф-70-20, режими роботи робочих органів, крок встановлення гребінок, довжина пальців гребінки та приведені особливості розвантаження кормів дозатором на поперечний горизонтальний транспортер-дозатор (друга ступінь дозування). In the article the analysis of literary researches and scientific publications is conducted on the dosage of forages and the new construction of vertical conveyer bunker separating metering device which is equipped chain and combs with fingers is offered. Structural parameters, functionally-technological chart on the basis of bunker-metering device of BDK-F-70-20, modes of workings organs, step of setting of combs, are grounded in theory, length of fingers of comb and the features of unloading of forages a metering device are resulted on a transversal horizontal conveyer-metering device (second stage of dosage).Item Теоретичні дослідження процесу змішування кормів стрічково-лопатевим змішувачем(КНТУ, 2011) Кісільов, Р. В.; Kisilyov, R.В статті проведений аналіз роботи і теоретичних досліджень традиційних конструкцій змішувачів кормів, визначені напрямки вдосконалення процесу змішування та запропонована нова конструкція стрічково-лопатевого змішувача, принцип роботи якого пояснюється технологічними і розрахунковими схемами. Теоретично обґрунтовані кінематичні параметри і визначені енергетичні витрати. The analysis work and theoretical researches of traditional constructions of mixers forages is conducted in the article, directions improvement of process mixing are certain and the new construction band-blade mixer is offered Principle of work which is explained technological and calculation charts. In theory kinematics parameters are grounded and power expenses are certain.