Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
3 results
Search Results
Item Алгоритм цифрової ідентифікації зернових матеріалів(ЦНТУ, 2024) Степаненко, С. П.; Днесь, В. І.; Борис, А. М.; Кузьмич, А. Я.; Волик, Д. А.; Stepanenko, S.; Dnes, V.; Borys, A.; Kuzmych, A.; Volyk, D.Розглянуто питання застосування технологій машинного зору для підвищення точності та ефективності ідентифікації зернових матеріалів у процесі післязбиральної обробки. Визначено, що традиційні методи контролю якості зерна, зокрема візуальні, мікробіологічні та хімічні тести, мають суттєві обмеження при ідентифікації домішок, особливо тих, що подібні за фізичними та візуальними ознаками. Запропоновано алгоритм цифрової ідентифікації зерна, заснований на методах машинного зору та машинного навчання. The article examines the application of machine vision technologies to enhance the accuracy and efficiency of grain material identification during post-harvest processing. It has been determined that traditional grain quality control methods, including visual, microbiological, and chemical tests, have significant limitations in identifying impurities, especially those similar in physical and visual characteristics. In response to these challenges, a digital grain identification algorithm based on machine vision and machine learning methods is proposed.Item Дослідження фізико-механічних та оптичних характеристик зернових матеріалів(ЦНТУ, 2024) Степаненко, С. П.; Кузьмич, А. Я.; Борис, А. М.; Днесь, В. І.; Волик, Д. А.; Кузьмич, А. А.; Stepanenko, S.; Kuzmych, A.; Borys, A.; Dnes, V.; Volyk, D.; Kuzmych, A.Дослідження виконувалося на основі експериментальних даних щодо основних фізикомеханічних характеристик пшениці та її оболонок. Подано структурно-функціональну схему і опис приладу для визначення оптичних характеристик зернових матеріалів.Встановлено, що зі збільшенням вологості зростають і досліджувані показники: коефіцієнт тертя, кут природного укосу та коефіцієнт внутрішнього тертя. Отримано значення спектральних коефіцієнтів відбиття випромінювання видимого діапазону від зернових матеріалів та коефіцієнтів пропускання випромінювання від висоти шару матеріалу. The purpose of the study is to experimentally study the dependence of the physical and mechanical parameters of wheat grain on the moisture level and optical characteristics: the coefficient of friction on the perforated surface, the angle of natural slope and the coefficient of internal friction, the coefficient of absorption and reflection of light rays from the grain. The study is based on experimental data on the main physical and mechanical characteristics of wheat and its husks. The method of determining the physical and mechanical characteristics of wheat grain is presented, and the conditions of the experiments are described. The work presents a structural and functional scheme and a description of the device for determining the optical characteristics of grain materials.Item Збирання незернової частини урожаю соняшнику на енергетичні цілі(ЦНТУ, 2020) Кузьмич, А. Я.; Анеляк, М. М.; Грицака, О. М.; Kuzmych, A.; Aneliak, M.; Hrytsaka, O.; Грицака, А. Н.Проведено аналіз технологій збирання соняшнику, обґрунтовано спосіб збирання подрібненої маси незернової частини урожаю соняшнику з формуванням валків підвищеної погонної маси на краю поля. Наведено результати лабораторно-польових досліджень збирання, підбору та пресування подрібненої маси незернової частини урожаю соняшнику. Запропоновано конструкційно-технологічну схему причіпного копнувача-валкоутворювача до зернозбирального комбайна для формування валків незернової частини урожаю соняшнику з підвищеною погонною масою. The aim of the research is to increase the efficiency of harvesting the non-grain part of the sunflower crop for energy purposes by developing technology and substantiation of technical means. The analysis of sunflower harvesting technologies is carried out; the method of harvesting the crushed mass of the non-grain part of the sunflower crop with the formation of windrows of high linear mass at the edge of the field is substantiated. The results of laboratory field research of harvesting, selection and pressing of the crushed mass of the non-grain part of the sunflower crop are presented. Directions of improvement of the baler for harvesting of a non-grain part of sunflower harvest are noted. The constructional-technological scheme of the trailed hopper and windrow-former to the combine harvester for formation of windrows of a non-grain part of a crop of sunflower with the increased running weight is offered. The results of laboratory field studies confirmed the hypothesis of the possibility of selecting the rolls of the crushed mass of the non-grain part of the sunflower crop with a running weight of more than 20 kg per meter at a level of losses not exceeding 20%. The efficiency of harvesting the non-grain part of the sunflower crop for energy purposes can be increased by collecting the crushed mass passed through the combine harvester in a trailed digger and forming rolls with high running weight at the edge of the field for drying and subsequent selection by serial balers. It is established that at the level of yield of sunflower seeds within 3 ton per ha the volume of harvesting by the combine harvester of the crushed weight of non-grain part makes 7.5-8.5 center per ha. When picking with a baler, rolls with a density of 75-90 kg per m3 were formed at an average humidity of 23%. Проведен анализ технологий уборки подсолнечника, обоснован способ уборки измельченной массы незерновой части урожая подсолнечника с формированием валков повышенной погонной массы на краю поля. Приведены результаты лабораторно-полевых исследований уборки, подбора и прессования измельченной массы незерновой части урожая подсолнечника. Предложена конструкционно-технологическая схема прицепного копнителя-валкообразователя к зерноуборочному комбайну для формирования валков незерновой части урожая подсолнечника с повышенной погонной массой.