Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
3 results
Search Results
Item Інтенсифікація процесу сепарації зерна на плоскому коливальному решеті із зигзагоподібним розташуванням отворів(ЦНТУ, 2024) Бажан, І. М.; Васильковський, О. М.; Лещенко, С. М.; Амосов, В. В.; Bazhan, I.; Vasylkovskyi, O.; Leshchenko, S.; Amosov, V.У статті викладені результати теоретичного аналізу шляхів підвищення ефективності роботи плоских коливальних решіт. Встановлено, що підвищення ефективності сепарації можливо досягти лише шляхом інтенсифікації процесів взаємного переміщення (сегрегації) часток всередині шару матеріалу у вертикальній і горизонтальній площинах. Висловлено припущення, що найбільш ефективною є активізація внутрішньошарових процесів у оброблюваному матеріалі, яка забезпечується двома способами – встановленням оптимального кінематичного режиму коливань і конструкційними параметрами самого решета. Наведено нове, запатентоване технічне рішення – решето із зигзагоподібним розташуванням отворів і сформовано основні задачі і елементи методики попередніх досліджень. Сформульовано висновки за результатами проведеного аналізу. Increasing the quantitative and qualitative performance of agricultural machinery is a pressing task for scientists conducting research in the field of agricultural engineering. This article is devoted to the analysis of methods and means of intensification of intralayer processes occurring in grain material during sieve separation in order to increase the efficiency of grain cleaning by size on flat-screen vibrating machines.Item Оцінка рівномірності розподілу та засміченості зерна при його багаторівневому введенні в пневмосепаруючий канал(ЦНТУ, 2021) Нестеренко, О. В.; Лещенко, С. М.; Васильковський, О. М.; Петренко, Д. І.; Nesterenko, O.; Leshchenko, S.; Vasylkovskyi, O.; Petrenko, D.Одним із важливих показників ефективності роботи пневмосепаруючих каналів є рівномірність поля швидкостей повітряного потоку, яка в свою чергу залежить від розподілу зернового матеріалу в робочій зоні сепарації. В статті приведені результати розподілу зернового матеріалу при багаторівневому способі введення зерна, а також його вплив на засміченість легкими домішками по висоті пневмосепаруючого каналу. В результаті досліджень отримано залежності засміченості очищеного зерна легкими домішками від кількості задіяних рівнів живильного пристрою. The uniformity of grain distribution in a pneumatic separation channel is an important factor and it significantly affects the quality of grain cleaning. Indeed, with uneven feeding, impurities entering the pneumatic separating channel, to a large extent, are located in the middle or lower layers of grain flow, which impairs the possibility of their release into the settling chamber. Feeders are used to create a more uniform distribution of grain in the operating area of the pneumatic separating channel. They provide conditions under which grain material is fed into the air stream by a thin layer of directed jet. This feeding can significantly improve the interaction of the components of the input grain material with air, increasing the likelihood of their release, as well as minimize the contact of particles of the grain mixture, which significantly increases the efficiency of air flow. Based on the review and analysis of feeder designs, we have proposed a feeder for multi-level grain introduction. The use of such a feeder can significantly improve the quality of pneumo-separation, but there is a possibility of light impurities in the upper grain layers, which can affect the completeness of the separation of the purified grain. Experimental studies were conducted to determine the effect of multilevel introduction on the content of light impurities in the purified grain along the height of the pneumatic separation channel, as well as to analyze the distribution of grain mixture in the operating separation area. As a result of the conducted research it is determined that the number of involved levels of introduction of the feeding device influences the degree of clogging of the cleared grain, thus, uniformity of distribution of grain improves at increase in quantity of levels. In particular, when using up to 4 levels of the feeder under load qbi = 350 kg/dm·h at each level, the amount of light impurities entering the purified grain is not more than 3% of their total weight in the source material.Item Дослідження безконтактного руху легких домішок у вертикальному пневмосепаруючому каналі(КНТУ, 2016) Нестеренко, О. В.; Лещенко, С. М.; Петренко, Д. І.; Гончарова, С. Я.; Мельник, Ю. В.; Nesterenko, О.; Leshchenko, S.; Petrenko, D.; Goncharova, S.; Melnik, Y.В статті розглянуто безконтактний рух легких частинок в вертикальному ПСК при їх багаторівневому одношаровому введенні. При прийнятих допущеннях отримані закономірності безконтактного руху легких частинок в ПСК, які дозволяють визначити раціональні параметри живильного пристрою. В результаті теоретичного аналізу визначено час перебування легких частинок в ПСК при їх безконтактному русі та зону їх виділення під час розділення зернової суміші повітряним потоком. Rational use of air flow during the separation of the grain mix is one of the main problems in pneumatic separation. Thus, it is necessary to ensure appropriate quality cleaning performance while increasing grain cleaning machines (GCM). In greater degree it concerns pneumatic GCM, who have somewhat lower rates than specific performance sieve. Therefore, improvement and development of new pneumatic structures is an important and urgent task. Taking into account the insufficient analytical scrutiny process at pneumatic separation multilayer material in grain movement pneumatic separating channel (PSC) is necessary tasks to establish patterns of airflow interaction with light impurities during their flight in contactless PSC. As a result of analytical study examined contactless movement of light impurities when entering multigrain single layer material, ie flow, in which crops are layers PSC each other with a certain interval and have the same kinematic characteristics. Based on the theoretical analysis established pattern of interaction of light particles of grain mixture with air flow during flight of contactless multi-grain placing a single layer of material in PSC. Established that the contactless movement of light impurities in the PSC, regardless of the input area of selection is in the range 0.015 ... 0.05 m, depending on their coefficient of sails. The goal of future research should be to establish contact interaction of light impurities from the grain mixture and air flow in the multilayer material placed in the PSC.