Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
6 results
Search Results
Item Елементи ремонтопридатності і технологічної надійності льонозбиральних комбайнів(ЦНТУ, 2017) Лімонт, А. С.; Добранський, С. С.; Лимонт, А. С.; Добранский, С. С.; Limont, A.; Dobransky, S.Узагальнені результати досліджень з визначення впливу тривалості усунення технологічних відмов льонозбиральних комбайнів, що спричинені зупинками агрегату на очищення робочих органів комбайна від рослинних решток і тривалості виконання щозмінного технічного обслуговування льонозбиральних комбайнів на продуктивність комбайнового агрегату. З’ясовано закон розподілу наробітку на технологічну відмову і тривалості їх усунення та вплив числа технологічних відмов комбайна за годину змінного часу на продуктивність комбайнового агрегату. Обобщены результаты исследований по определению влияния продолжительности устранения технологических отказов льноуборочных комбайнов, вызванных остановками агрегата на очистку рабочих органов от растительных остатков, и продолжительности выполнения ежесменного технологического обслуживания льноуборочных комбайнов на производительность комбайнового агрегата. Определены закон распределения наработки на технологический отказ и продолжительности их устранения, а также влияние числа технологических отказов комбайна в час сменного времени на производительность комбайнового агрегата. The investigation is aimed at enhancing the efficiency of using flax harvesters which was assessed by means of the production capacity of machine units as components of these harvesters. The use of flax harvesters under real conditions of harvesting fiber flax is investigated. The author studies the duration of maintance in shifts and in the basic time of the shift, as well as the distribution of the operating time with respect to the technological failure and the duration of removing failures of flax harvesters. The author also determines the qualitative and quantitative relations between the quoted indices and suggests the model equations of regression which describe the revealed quantitative changes in these indices. The author determines the laws of distribution of the operating time before failures and the terms for removing them/ The paper specifies the number of technological failures of the harvester per hour of the shift of its operation. The paper analyzes the correlation between the production capacity and the coefficient of using the shift working hours of the flax harvester unit and the number of technological failures of the harvester per hour of the shift time. On the basis of the specified coefficient of the correlation and the correlation ratios with the use of the Student t-criterion the author determines the non-linearity of the correlation between the harvester unit production capacity per hour of the shift time and the terms for removing technological failures. Within the shift time and the part of this term in the structure of the shift time which are described with the equations of dipping hyperbolas. The changes in the investigated production capacity depend on the partial coefficient which takes into account the idle time of the harvesting unit due to the process of removing technological failures. The above changes also depend on the reliability coefficient of the technological process and can be described with the equations of the corresponding gradually ascending hyperbolas. The author reveals the curve linear correlation links between the production capacity of the harvester unit per hour of the shift time and the term of the shiftly technical maintenance of the flax of the flax harvester, the part of this term in the structure of the shift time, partial coefficients of using the time for the shiftly technical maintenance with respect to the duration of the shift and the level of providing shiftly technical maintenance. The corresponding correlation and regression models are determined as well.Item Транспортне забезпечення льонозбирального процесу(КНТУ, 2012) Лімонт, А. С.; Limont, A.Досліджено і визначено елементи транспортного забезпечення збирання льоновороху при використанні льонозбиральних комбайнових агрегатів. Охарактеризовані розподіли маси вороху в причепі і що поступає за зміну роботи комбайнового агрегату. Оцінено потік причепів з ворохом, що формує льонозбиральний комбайновий агрегат. The paper investigates and determines the elements of the transport service of flax heap harvesting when using flax harvesting combine units. It characterizes the distribution of the heap bulk in the trailer and the bulk coming during the shift of the combine unit operation. The flow of trailers with heap which forms the flax harvesting combine unit has been estimated.Item Вантажно-транспортне забезпечення збирання льонотрести(КНТУ, 2011) Лімонт, А. С.; Limont, A.Опрацьована методика розрахунку вантажно-транспортного забезпечення збирання льонотрести. Наведені розрахункові залежності для визначення тривалості навантажування снопів і рулонів трести в транспортні засоби та потреби в транспортних засобах, використання яких сприятиме реалізації потоковості технологічного процесу збирання. The paper develops the methods of calculating the loading and transport support of broken flax harvesting. It presents calculation relationships for determining the time needed for loading broken flax sheafs and rolls into a transport vehicle and the demand for transportation facilities the use of which will facilitate the continuity of the technological process of harvesting.Item Тривалість збирання льонотрести та її агротехнологічне прогнозування(КНТУ, 2013) Лімонт, А. С.; Limont, A.В реальних умовах виробництва льону-довгунця вивчено статистичний розподіл тривалості збирання рошенцевої трести з визначенням основних його характеристик. З урахуванням нормативних тривалостей сівби, брання і розстилання льону-довгунця, а також проектованої тривалості вилежування льонотрести зпрогнозована агротехнологічна тривалість її збирання. The investigation is aimed at increasing the efficiency of mechanized harvesting of the spread rotted straw through revealing the relations between qualitative, quantitative indices of fiber and the duration of raw fiber maturing and picking. Using real terms of rotted straw picking under the conditions of fiber flax production the statistical distribution of the duration of the spread rotted stray harvesting along with determining its baser characteristic is studied. The author specifies the correlation and repression model of the percent number of the scotched long fiber and the duration of the rotted straw maturing through the equation of convex parabola of the second order. The operation tolerance related to the duration of the rotted straw maturing is determined. The results of the investigations info the determination and substantiation of the standard duration of fiber flax sowing and the agrotechnical duration of the flax scotching and spreading under the conditions of combined harvesting are generalized. With respect to the operation tolerance to the duration of the rotted straw maturing of 10 days, agrotechnical duration of fiber flax scotching and straw spreading of 15 days and the standard duration of sowing amounting to 4 days one can prognosticate the duration of the rotted straw harvesting amounting to 29 days.Item Швидкість руху агрегату і висота брання льону-довгунця як фактори якості очісування стебел комбайном(КНТУ, 2010) Лімонт, А. С.; Limont, A.Розглянуто втрати насіння від недоочісування стебел залежно від швидкості руху льонозбирального комбайнового агрегату та висоти брання льону-довгунця. Вплив досліджуваних факторів на якість очісування визначений з використанням елементів дисперсійного аналізу. The paper considers loss of seeds by stalk under stripping mess depending on flax combine unit travel speed and fiber flax pulling height. The influence of the factors under study on the stripping quality has been determined using some elements of dispersion analysis.Item Закономірності відходу стебел в плутанину при збиранні льону-довгунця комбайнами(КНТУ, 2011) Лімонт, А. С.; Limont, A.Висвітлені втрати волокнистої складової урожаю льону-довгунця при механізованому збиранні. Наведені залежності, що пояснюють механізм відходу стебел в плутанину при збиранні льону-довгунця комбайнами. Узагальнені наукові дані про вплив на відхід стебел в плутанину секундної подачі їх в комбайн, висоти брання та регулювань затискного конвеєра. The paper deals with the losses of the yield fibrous component under mechanized harvesting. It presents characteristics which explain the mechanism of stalk getting to tangled mess when harvesting fiber flax by combines. The author summarizes scientific data concerning the influence of the stalk feed per second into the combine, the height of pulling and the clumping conveyor adjustments on stalk getting to tangled mess.