Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
5 results
Search Results
Item Маса і габаритні розміри кузовних машин для внесення твердих органічних добрив(ЦНТУ, 2022) Лімонт, А. С.; Лімонт, З. А.; Limont, А.; Limont, Z.Мета дослідження полягала в поліпшенні ефективності технологічного процесу внесення твердих органічних добрив кузовними розкидачами та їх проектування шляхом пізнання статистичних зв’язків між масою машин як результативною ознакою і їхніми габаритними довжиною, шириною та висотою як факторіальними ознаками. Досліджено і зворотний статистичний зв’язок, за якого габаритні довжина, ширина і висота машин визначені як результативні ознаки, а маса машин прийнята за факторіальну ознаку. Дослідження показали, що зміну маси машин залежно від їхніх габаритних довжини і висоти та довжини і висоти машин залежно від їх маси успішніше всього подати рівняннями прямих з додатними кутовими коефіцієнтами. За розрахунками зміну маси машин залежно від габаритної ширини та габаритної ширини машин від їх маси доцільно описати відповідно рівняннями прискорено зростаючої експоненти і сповільнено зростаючої степеневої функції. Отримані в результаті дослідження залежності можуть бути використані при проектуванні кузовних машин для внесення твердих органічних добрив та організації їх використання в реальних умовах удобрення ґрунту в механізованих технологічних процесах вирощування сільськогосподарських культур.The research is aimed at improving the efficiency of the technological process of applying solid organic fertilizers by body spreaders, as well as at their design through determining statistical links between the mass of mass of machines as the resultative character and their length, width and height clearance as their factorial characters. The research also covers the reverse statistical link according te which the length, width and height clearance of machines are determined as the resultative characters, and the mass of machines is taken as a factorial character. The objects of the study were body machines for the introduction of solid organic production by enterprises located in the former Soviet Union and modern Ukraine. The data related to the mass of machines and their clearance dimensions have been chosen from the corresponding catalogues of farm machinery and advertising information of plants producing machines for applying solid organic ferhlizers. The processing of the data collected is made on the basis of the mathematical statistics, as well as with the use of standard computer programs. The correlation coefficients in the investigated pair statistical links have taken positive values ranging from 0.474 to 0.890 under the correlation links of the resultative characters for factorial ones which fluctuated from 0.609 to 0.866. The increase in the factorial characters is accompanied by the resultative characters investigated. In order to specily and reveal the character of the relations between the investigated parameters of body machines used for applying solid organic fertilizers we have accomplished the adjustment of experimental values of the resultative characters depending on factorial equations of straight lines with positive angular coefficients and curvilinear relations – graded with logarithmic, exponential and indicial ones and with hyperbolas with the determination of R2-coefficient for every approximation functions. The research testifies that change in the mass of machines depending on their length and height clearance and length and height of machines depending on their mass will be better presented by the equations of straight lines with positive angular coefficients. According to calculations the change in the mass of machines depending on its width clearance and the width clearance depending on its mass appears most expedient when presehted by the corresponding equations of the accelerated increasing exponent and gradually increasing inter-stage function. The dependences obtained as a result of the research conducted can be used for designing body machines for spreading solid organic fertilizers, as well as for using them in the technological processes of growing farm crops.Item Маса коріння рослин і прогнозування продуктивності льону-довгунця та якості волокна(ЦНТУ, 2022) Лімонт, А. С.; Лімонт, З. А.; Limont, А.; Limont, Z.Мета статті полягала в дослідженні продуктивності льону-довгунця та якості волокна і кількості елементарних волокон на поперечному зрізі стебла залежно від маси коріння рослин. В якості продуктивності льону-довгунця визначені густота стеблостою перед збиранням, а також урожайність насіння і волокна. До показників якості волокна віднесені номер довгого волокна, міцність волокна, гнучкість, метричний номер і розрахункова добротність пряжі. Оцінена кількість елементарних волокон в луб’яному пучку та всього волокон на поперечному зрізі стебла. На підставі кореляційно-регресійного аналізу з використанням експериментальних даних Л.Д. Фоменка з’ясовано, що зміна густоти стеблостою, урожайності насіння і волокна, номера довгого волокна, міцності і гнучкості волокна, його метричного номера і розрахункової добротності пряжі, маси рослин на початку цвітіння і перед збиранням, кількості елементарних волокон в луб’яному пучку і всього волокон на поперечному зрізі стебла, а також висоти рослин залежно від маси коріння описується рівняннями прямолінійної регресії з додатними кутовими коефіцієнтами. Зміна діаметра стебел залежно від маси коріння рослин описується рівнянням прямої з від’ємним кутовим коефіцієнтом. The purpose of the article was to study the productivity of flax and the quality of the fiber and the number of elementary fibers in the cross section of the stem depending on the mass of the roots of plants. The density of stalks before harvesting, as well as the yield of seeds and fibers were determined as the productivity of long flax. The fiber quality indicators include the number of long fiber, fiber strength, flexibility, metric number and the calculated quality factor of the yarn. The number of elementary fibers in the bast bundle and the total fiber in the cross section of the stem is estimated. Based on correlation-regression analysis using experimental data, L.D. Fomenko determined that the change in stem density, seed and fiber yield, long fiber number, its strength and flexibility, metric number and calculated quality of yarn, plant weight at the beginning of flowering and before harvest, the number of elementary fibers in the bast bundle and all fibers in the cross section stem, as well as the height of the plants depending on the mass of the roots is described by the equations of rectilinear regression with positive angular coefficients. The change in the diameter of the stems depending on the mass of the roots of the plants is written off by the equation of the line with a negative angular coefficient.Item Взаємозалежності об’єму кузова і вантажопідйомності та маси машин для внесення твердих органічних добрив(ЦНТУ, 2022) Лімонт, А. С.; Лімонт, З. А.; Limont, A.; Limont, Z.Мета роботи полягала в дослідженні зв’язку між об’ємом кузова машин для внесення ТОД і їх вантажопідйомністю та масою, а також зворотної зміни вантажопідйомності і маси цих машин залежно від об’єму кузова. В першому випадку результативною ознакою був об’єм кузова, а факторіальними – вантажопідйомність і маса машин, а в другому – за результативні ознаки прийняті вантажопідйомність і маса машин, а в якості факторіальної ознаки визначений об’єм кузова машин для внесення ТОД. Обробка зібраних даних здійснена на засадах математичної статистики і зокрема кореляційно- регресійного аналізу та з використанням стандартних комп’ютерних програм. Коефіцієнт кореляції між об’ємом кузова машин для внесення ТОД і вантажопідйомністю машин, між вантажопідйомністю машин і об’ємом кузова мав однакове значення 0,920. Однакове значення мали і кореляційні відношення об’єму кузова на вантажопідйомність та вантажопідйомності машин на об’єм кузова, яке становило 0,935. Кількісну зміну об’єму кузова залежно від маси машин і маси машин залежно від об’єму кузова краще описують рівняння прямолінійної регресії з додатними кутовими коефіцієнтами (R2=0,824). При збільшенні маси машин на 1 т за її зміни від 1 до 13,7 т об’єм кузова зростає на 1,8 м3. Із збільшенням об’єму кузова на 1 м3 за його зміни від 1,9 до 25,7 м3 маса кузовних машин зростає на 0,456 т. The aim of the study was to investigate the relationship between the body volume of solid organic fertilizer (TOD) machines and their load capacity and weight, as well as the inverse change in load capacity and weight of these machines depending on the body volume. In the first case, the effective feature was the volume of the body, and the factorial – load capacity and weight of machines, and in the second – the effective characteristics were taken to be the load capacity and weight of machines, and as a factorial feature was the body size of the machine. The study included 47 brands and models of body machines for TOD, including 14 machines manufactured by enterprises located in the former Soviet Union, and 9 and 24 produced by “KUHN” and “Strautmann”, respectively. The value of the studied resultant and factorial features was found using information from domestic and foreign literature. The collected data are processed on the basis of mathematical statistics and in particular correlationregression analysis and using standard computer programs. The correlation coefficient between the volume of the body of the machine for applying TOD and the load capacity of the machines, between the load capacity of the machines and the volume of the body was the same value 0,920. The correlation ratios of body volume to load capacity and machine load capacity to body volume, which was 0.935, were equally important. Between the volume of the body and the weight of the cars as well as between the weight of the cars and the volume of the body, the observed values of the correlation coefficients also had the same value, equal to 0.908 and positive. In the two paired relationships studied, the correlations between body volume to machine weight and machine mass to body volume had the same value of 0.861. Quantitative changes in body volume depending on the weight of the machines and the weight of the machines depending on the volume of the body are better described by the equations of rectilinear regression with positive angular coefficients (R2 = 0.824). As the weight of the machines increases by 1 ton and changes from 1 to 13.7 tons, the body volume increases by 1.8 m3. With an increase in body volume by 1 m3 with its change from 1.9 to 25.7 m3, the weight of body cars increases by 0.456 tons. Quantitative change in body volume depending on load capacity and load capacity depending on body volume should be described by equations of rectilinear regressions with positive angular coefficients (R2 = 0.847). According to the calculated R2 coefficients equal to 0.875, the approximation of the experimental values of the effective features of body volume and load capacity to their aligned values was provided by approximating the change in body volume and load capacity by the equations of slowly increasing power functions. According to the angular coefficients of the equations of lines when increasing the load capacity of body machines by 1 ton for its change from 2 to 34 tons, the body volume increases by 0.799 m3, and when increasing the body volume by 1 m3 for its changes from 1.9 to 25, 7 m3 capacity of machines increases by 0.581 tons.Item Коренева система рослин і характеристики стебел льону-довгунця(ЦНТУ, 2022) Лімонт, А. С.; Лімонт, З. А.; Limont, A.; Limont, Z.В статті досліджені характеристики стебел льону-довгунця залежно від маси коріння однієї рослини та її частки в загальній масі рослин. В якості характеристик стебел прийняті висота рослин, маса насіння з однієї рослини, зігнутість стебел, кількість рослин з рівним стеблом (%), вміст деревини в 10-сантиметровому відрізку стебла на відстані від сім’ядольних листочків до 10 см, 10–20 і 20–30 см, а також вихід волокна з технічної частини стебла. На підставі кореляційно-регресійного аналізу експериментальних даних про масу коріння однієї рослини льону-довгунця, а також частку маси коріння в загальній масі рослин і досліджуваних характеристик стебел, які наведені в літературних джерелах, з’ясовано, що зміна висоти рослин, маси насіння з однієї рослини, кількості рослин з рівним стеблом (%) та вмісту деревини в 10-сантиметровому відрізку стебла на відстані до 10 см від сім’ядольних листочків залежно від частки маси коріння в загальній масі рослин описується рівняннями прямолінійної регресії з додатними кутовими коефіцієнтами. Залежно від цієї ж факторіальної ознаки зміна зігнутості стебел описується рівнянням спадної степеневої функції. The aim of the article was to study the characteristics of long flax stalks depending on the mass of roots of one plant and its share in the total mass of plants. The characteristics of the stems are the height of plants, seed weight per plant, curvature of stems, number of plants with flat stems (%), wood content in a 10-centimeter segment of the stem at a distance of cotyledons up to 10 cm, 10-20 and 20 -30 cm, as well as the output of the fiber from the technical part of the stem. The range of variation of the mass of absolutely dry roots of one plant ranged from 89 to 192 mg for arithmetic mean and standard deviation of 138 and 29.3 mg, respectively, and the coefficient of variation of the empirical distribution of root mass of one plant of the analyzed long flax varieties 21.2%. The share of root mass in the total mass of plants ranged from 19.5 to 32.9%. The main statistical indicators of empirical distributions of the found out characteristics of stalks of flax plants have been determined. Based on correlation-regression analysis of experimental data on the mass of roots of one long flax plant and the studied characteristics of stems, which are given in the literature, it was found that the change in plant height, seed weight per plant, number of plants with flat stems (%) , wood content in a 10-cm segment of the stem at a distance of 10 cm from the cotyledons depending on the proportion of root mass in the total mass of plants, stem curvature depending on the weight of seeds from one plant and stem curvature, wood content in a 10-cm stem segment at a distance of 10–20 and 20–30 cm from the cotyledons, the fiber output from the technical part of the stem, depending on the height of the plants, is described by rectilinear regression equations with positive angular coefficients. Change in the number of plants with flat stems (%) depending on the weight of seeds per plant and plant height, as well as the number of plants with flat stems (%) and wood content in a 10-cm section of stem at a distance of 10 cm from cotyledons depending on from the height of plants is described by the equations of rectilinear regression with negative angular coefficients. The change in the curvature of stems depending on the mass of the roots of one plant and the share of this mass in the total mass of plants is described by the equations of decreasing power functions. The change in the number of plants with a flat stem (%) depending on the root mass of one plant is described by the equation of slow-growing hyperbola. The closest correlation between studies was found between stem curvature and root mass of one plant (negative correlation) with a correlation coefficient of minus 0.706, between stem curvature and the share of root mass in total plant mass (negative correlation) with a correlation coefficient of minus 0.713, between the number of plants with a flat stem (%) and the share of root mass in the total mass of plants and the mass of roots of one plant (in both cases a positive correlation) with correlation coefficients of 0.759 and 0.779, respectively. In the studied relationships, the correlation ratios slightly exceeded the values of the correlation coefficients. A less close positive correlation was found between the wood content in a 10 cm section of the stem at a distance of 10 cm from the cotyledons and the share of root mass in the total mass of plants (correlation coefficient 0.444) and between fiber yield from the technical part of the stem and plant height (correlation coefficient 0.327). A negative correlation with a correlation coefficient of minus 0.336 was found between seed weight per plant and plant height. In these studied relationships, the correlation coefficients slightly exceeded the values of the correlation relations of the performance factors by factorial ones. A positive correlation with a correlation coefficient of 0.114 with a correlation ratio of 0.141 was found between the mass of seeds from one plant and the share of root mass in the total mass of plants. In the rest of the correlations studied, the correlation coefficients ranged from 0.013 to 0.102 and were even smaller. The results of the research can be used in designing the technological process of growing flax, choosing tools for basic tillage and elaboration of technological and operational regulations for the use of mechanization in the preparation and harvesting of Roshen flaxseed.Item Масово-об’ємні параметри і лінійні розміри платформи тракторних причепів(ЦНТУ, 2020) Лімонт, А. С.; Лімонт, З. А.; Limont, A.; Limont, Z.; Лимонт, А. С.; Лимонт, З. А.Мета дослідження полягала у з’ясуванні масово-об’ємних параметрів тракторних причепів та пошуку якісно-кількісних зв’язків між лінійними розмірами платформи транспортних засобів і їхніми масово-об’ємними параметрами. В якості параметрів прийняті маса і номінальна вантажопідйомність причепів та об’єм їх платформи по основних бортах. Лінійними розмірами платформи визначені внутрішні її довжина і ширина та висота по основних бортах. Залежно від маси і номінальної вантажопідйомності причепа та об’єму платформи по основних бортах внутрішні її довжина змінюється за прямолінійними залежностями з додатними кутовими коефіцієнтами, ширина – за сповільнено зростаючими гіперболами, а висота платформи по основних бортах сповільнено зростає за степеневими функціями. The paper is armed at determining the mass and volume parameters of tractor trailers and looking far the qualitative and quantitative relations between the linear dimensions of the platform of transport vehicles and their mass and volume parameters. The mass and nominal loading capacity of trailers, as well as the volume of their plat form according to the main ramps were taken as the above parameters. The linear dimensions of the platform determine their internal length and width and the height by the mass ramps. The investigated statistical binary relations are assessed by the coefficients correlation which augured additional values within the limits of 0.319–0.891, as well as by the correlation relations between the resultative indices according to factorial values from 0.530 to 0.868. The qualitative chandes in the resultative indices depending on the factorial indices with the use of standard computer prodrams are described by the regression equations. In accordance with R2-coefficient by means of equalizing the experimental values of the investigated resultative indices by a set of approximizing functions the character of the corresponding changes is determined. Depending on the mass and nominal loading capacity of the trailer and the volume of the platform according to the main ramps its internal length is changed according to rectilinear dependences with additional angular coefficients its width – by gradually increasing hyperbolas, and the height of the platform according to the main ramps gradually increases according to the degree functions. With respect to the changes in the height of the platform depending on the investigated factorial indices by the equations of gradually increasing hyperbolas as to their asymptotes the authors have determined the marginal increase in the height of the main ramps of the platform. Along with the change in the mass and nominal loading capacity of the trailers from 0.735 to 7.10 t and from 2.0 to 24.0 t respectively per ton, the increase in the mass and loading capacity of the trailer the length of the platform increases with the same consequence by 424 and 152 mm. Along with the change of the platform volume per from 2.0 to 15.2 m3, its increase per m3 is accompanied by the increase in the length of the platform by 330 mm. Along with the increase of mass and loading capacity of the trailer in more than 4 and 10 t respectively, as well as the increase of the platform volume in more than 8 m3, the intensity of the increase of its width slows down gradually. The marginal increase in the height of the main ramps of the platform along with the change in its volume, mass and loading capacity of the trailer amounts to 713, 714 and 775 mm respectively. The research results can be used for prognosticating the dimensions of the trailers under their calculation and design, as well as under the organization of the transporting support of the mechanized production of agricultural produce. Цель исследования состояла в определении массово-объемных параметров тракторных прицепов и поиске качественно-количественных связей между линейными размерами платформы транспортных средств и их массово-объемными параметрами. В качестве параметров приняты масса и номинальная грузоподъемность прицепов, а также объем их платформ по основным бортам. В зависимости от массы и номинальной грузоподъемности прицепа, объема платформы по основным бортам внутренние ее длина изменяется по прямолинейным зависимостям с положительными угловыми коэффициентами, ширина – по замедленно возрастающим гиперболам, а высота платформы по основным бортам замедленно возрастает по степенным функциям.