Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
2 results
Search Results
Item Экспериментальные исследования спектров шума шестеренного насоса с повышенным коэффициентом перекрытия зубчатого зацепления(КНТУ, 2015) Кулешков, Ю. В.; Руденко, Т. В.; Красота, М. В.; Матвиенко, А. А.; Осин, Р. А.; Kuleshkov, Yuriy; Rudenko, Timofey; Krasota, Mikhail; Matvienko, Alexandr; Osin, Ruslan; Кулєшков, Ю. В.; Матвієнко, О. О.; Осін, Р. А.В статье приведены результаты испытаний шумовых характеристик экспериментального шестеренного насоса с повышенным коэффициентом перекрытия зубчатого зацепления. Исследованы уровни звука, спектры шума экспериментального насоса с повышенным коэффициентом перекрытия зубчатого зацепления, а также серийного насоса аналогичного типоразмера при разных режимах их работы. Выполнен сравнительный анализ шумовых характеристик насосов при разных нагрузках с целью оценки эффективности использования зубчатого зацепления с повышенным коэффициентом перекрытия в шестеренных насосах с целью снижения шума. В статті наведені результати випробовувань шумових характеристик експериментального шестеренного насоса з підвищеним коефіцієнтом перекриття зубчатого зачеплення. Досліджено рівні звуку, спектри шуму експериментального насосу з підвищеним коефіцієнтом перекриття зубчатого зачеплення, а також серійного насосу аналогічного типорозміру при різних режимах їх роботи. Виконано порівняльний аналіз шумових характеристик насосів при різних навантаженнях з метою оцінки ефективності використання зубчатого зачеплення з підвищеними коефіцієнтом перекриття в шестеренних насосах з метою зниження шуму. The objective of the work is the experimental testing of the noise level by the lines of spectrum of the experimental gear pump with helical toothing and the comparison with the noise level of a serial pump. The article presents the results of tests of noise characteristics of the experimental gear pump with the increased overlapping coefficient. The levels of noise, noise spectrums of the experimental gear pump with the increased overlapping coefficient and a serial pump of the analogical size with straight toothing were investigated using different operating modes. The comparative analysis of noise characteristics of the pumps under different load was carried out in order to estimate the efficiency of using increased overlapping coefficient in gear pumps from the point of view of noise reduction. The researching of the sound level of experimental pump showed, that the using of gearing with increased ratio of overlap allows to decrease the noise level that radiated. Mainly the noise level is influenced by speed mode of work, with increasing the frequency of rotation the sound level of a pump increasing by 9…14.5 dB. Comparative analysis of experimental and serial pumps allows to approve, that the level of noise of experimental pump with lower pressure of working liquid 4..16 MPa, and only with zero pressure has higher value. In tests on the maximal loading mode (P=16,0 MPa) in all diapason of rotation experimental pump has lower sound level, than a serial pump. Difference in the sound level of a serial pump and experimental pump is located within 0.5…4.5 dB depending on speed work mode.Item Аналіз існуючих уявлень про механізм виникнення пульсацій миттєвої подачі шестеренного насоса(КНТУ, 2014) Кулєшков, Ю. В.; Руденко, Т. В.; Красота, М. В.; Осін, Р. А.; Кулєшкова, К. Ю.; Kuleshkov, Yuriy; Rudenko, Tymofiy; Krasota, Mykhailo; Osin, Ruslan; Kuleshkova, KseniaВ статті наведені теоретичні дослідження спрямовані на розробку фізичної моделі та відповідної їй аналітичної залежності миттєвої подачі, що дозволяють пояснити причини і механізм пульсації миттєвої подачі шестеренного насоса. The objective of the research is the elaboration of a mathematical physical model of immediate flow of a gear pump which allows explaining the mechanism of occurrence of pulsations of immediate flow and pressure in the process of work cycle of a gear pump. We suggested a new physical model and a corresponding mathematical model of the process of immediate flow of a gear pump which show that the process of flow consists of two simultaneously occurring processes: the process of volume reduction which stimulates flow and the process of volume increase which blocks flow. The suggested mathematical model allows explaining the pulsating character of immediate flow of a gear pump due to the peculiarities of changes of conditional radiuses which connect the centres of gears with the contact point and while rotation they block the flow.