Збірники наукових праць ЦНТУ

Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1

Browse

Search Results

Now showing 1 - 4 of 4
  • Item
    Вплив енергії геоелектромагнітного поля на підвищення врожайності сільськогосподарських культур
    (КНТУ, 2016) Свірень, М. О.; Амосов, В. В.; Шмат, С. І.; Іванько, І. П.; Sviren, М.; Amosov, V.; Shmat, S.; Ivanko, І.
    Експериментально підтверджено вплив раціонального використання енергії електромагнітного поля Землі на врожайність сільськогосподаpських культур. Запропоновано нові агротехнічні прийоми обробітку ґрунту та сівби і вдосконалені робочі органи для їх реалізації. У результаті впровадження нової технології отримано підвищення врожайності сільськогосподаpських культур на 12–15%.Field experiments for research of the influence of energy of the electromagnetic field of Earth on the productivity of agricultural crops were conducted. Placement of steel wires on the bottom of the ditch in the direction north-south allowed getting increase in productivity of grain-crops from 3 to 8% comparing to the mouldboard and subsurface methods of soil cultivation. Four years of experience showed that for the increase of productivity of wheat, corn, soy on 12–15% it is necessary to conduct subsurface tillage of soil with simultaneous ditching at the depth of 40 cm in direction north-south. In order to decrease energy losses it is recommended to combine sowing of the cultivated cultures with ditching.
  • Item
    Удосконалення конструкції пневмомеханічного висівного апарата
    (КНТУ, 2009) Косінов, М. М.; Шмат, С. І.; Амосов, В. В.; Kosinov, М.; Shmat, S.; Amosov, V.
    Проведено аналіз впливу стабільності величини розрідження в вакуумній камері пневматичного висівного апарата на якість заповнення отворів висівного диска насінинами і розглянуто заходи для підвищення рівномірності величини розрідження, розроблені різними авторами а також основні переваги і недоліки цих пропозицій. На підставі проведених власних досліджень авторами запропоновано внести конструктивні зміни в серійний пневматичний висівний апарат для покращення заповнення отворів диска насінинами. The analysis of influencing of stability of size of rarefaction in the vacuum chamber of pneumatic sowing vehicle on quality of filling of opening of sowing disk is conducted by seeds and methods for the rise of evenness of size of rarefaction are considered, developed by different authors and also basic advantages and lacks of these suggestions. On the basis of the conducted own researches by authors it is offered to make structural alterations in the serial pneumatic sowing a vehicle for the improvement of fdling of opening of disk seeds.
  • Item
    Удосконалений сошник прямого посіву зернових культур
    (КНТУ, 2010) Шмат, С. І.; Гончаров, В. В.; Дейкун, В. А.; Shmat, S.; Goncharov, V.; Dejkun, V.
    Для підвищення схожості насіння і розвитку рослин запропонований сошник прямого посіву зернових культур. У статті розглянуті теоретичні передумови розміщення насіння після сошника та його переваги перед існуючими конструкціями. For the rise of likeness of seeds and development of plants soshnik of the direct sowing of corn cultures is offered. In the article the device of soshnik and his advantage before existent constructions is considered.
  • Item
    Ресурсозберігаючі технології вирощування сільськогосподарських культур
    (КНТУ, 2010) Шмат, С. І.; Лузан, П. Г.; Колісник, С. В.; Shmat, S.; Luzan, P.; Kolesnik, S.
    В статті розглянуті перспективні ресурсозберігаючі технології вирощування сільськогосподарських культур. Традиційні технології обробітку ґрунту та сівби дуже енергоємні, що приводить до погіршення родючості ґрунту, зменшення його біологічної активності і значного ущільнення. Сучасні технології потребують нових підходів, заснованих на безплужному обробітку ґрунту, використанні нових ефективних ґрунтообробних та посівних машин. Запропоновані засоби та технології забезпечують при менших витратах палива на 15-20% вищу урожайність. Perspective resource-saving technologies of culture growing are considered in the article. As the traditional technologies of tillage and crop treatment are very power-consuming it leads to deterioration of soil fertility, reduction of its biological activity and to significant soil packing. Modern technologies need new approaches which are based on plough-free tillage, usage of new effective tillage and seeding machines. Introduced tools and technologies ensure 15-20% higher crop capacity at less fuel costs.