Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
7 results
Search Results
Item Оптимізація параметрів мікроклімату в навчальних закладах з системами локальної рекуперації повітря(ЦНТУ, 2023) Савеленко, І. В.; Петрова, К. Г.; Котиш, А. І.; Сіріков, О. І.; Savelenko, I.; Petrova, K.; Kotysh, А.; Sirikov, O.Розроблена система автоматичного керування локальною рекуперацією повітря, яка гарантує оптимальні параметри мікроклімату у приміщеннях навчальних закладів. Застосовано комп'ютерне імітаційне моделювання системи керування мікрокліматом на основі температури та концентрації СО2. Виявлено переваги запропонованої системи, яка зменшила тривалість періоду з перевищенням максимально допустимого рівня концентрації СО2 на 49,5%, а також знизила значення концентрації СО2 на 13,1%, при відповідних межах температури. The aim is to develop an automatic local air recovery system to ensure thermal comfort and the normative composition of the air environment in educational institution premises. Improving the efficiency of local air recovery systems while maintaining optimal microclimate parameters is possible through the enhancement of automatic control systems for local recovery devices. An automatic air local recovery control system has been developed, which guarantees optimal microclimate parameters in educational institution premises. Computer simulation modeling has been applied to control the microclimate system based on temperature and CO2 concentration. The advantages of the proposed system have been identified, which reduced the duration of exceeding the maximum allowable level of CO2 concentration by 49.5% and decreased the CO2 concentration by 13.1% within the specified temperature limits.Item Оптимізація параметрів мікроклімату в навчальних закладах з системами локальної рекуперації повітря(ЦНТУ, 2023) Савеленко, І. В.; Петрова, К. Г.; Котиш, А. І.; Сіріков, О. І.; Savelenko, I.; Petrova, K.; Kotysh, А.; Sirikov, O.Розроблена система автоматичного керування локальною рекуперацією повітря, яка гарантує оптимальні параметри мікроклімату у приміщеннях навчальних закладів. Застосовано комп'ютерне імітаційне моделювання системи керування мікрокліматом на основі температури та концентрації СО2. Виявлено переваги запропонованої системи, яка зменшила тривалість періоду з перевищенням максимально допустимого рівня концентрації СО2 на 49,5%, а також знизила значення концентрації СО2 на 13,1%, при відповідних межах температури. The aim is to develop an automatic local air recovery system to ensure thermal comfort and the normative composition of the air environment in educational institution premises. Improving the efficiency of local air recovery systems while maintaining optimal microclimate parameters is possible through the enhancement of automatic control systems for local recovery devices. An automatic air local recovery control system has been developed, which guarantees optimal microclimate parameters in educational institution premises. Computer simulation modeling has been applied to control the microclimate system based on temperature and CO2 concentration. The advantages of the proposed system have been identified, which reduced the duration of exceeding the maximum allowable level of CO2 concentration by 49.5% and decreased the CO2 concentration by 13.1% within the specified temperature limits.Item Підвищення точності визначення місця виникнення короткого замикання в електричних мережах номінальною напругою 110-150 кВ(ЦНТУ, 2022) Котиш, А. І.; Зінзура, В. В.; Гарасьова, Н. Ю.; Сіріков, О. І.; Солдатенко, В. П.; Kotysh, А.; Zinzura, V.; Harasova, N.; Sirikov, O.; Soldatenko, V.На основі аналізу схеми нормального режиму мережі 150 кВ ПрАТ «Кіровоградобленерго» встановлено, що існує ряд підстанцій, де встановлення фіксаторів короткого замикання просто необхідно для виявлення відгалуження на лінії електропередач, де виникло пошкодження. Запропоновано на базі розробленого пристрою електромеханічного фіксатора короткого замикання для повітряних мереж напругою 110-150 кВ запровадження радіоканалу для передачі інформації про стан мережі та місця пошкодження до чергового персоналу. The article is devoted to the study of improving the efficiency of the electric network with a voltage of 110-150 kV through the use of a developed device FKZ, which uses a radio channel to transmit information. At the present stage of development of electric power industry the question of reliability of work of high-voltage electric networks plays an important role. During the operation of such electrical networks, emergencies inevitably occur, the most dangerous of which are short circuits. Determining the location of damage to the electrical network is the most complex, time-consuming and time-consuming technological operation with significant costs. Therefore, the task of improving the design of devices to determine the location of damage, the use of which will significantly reduce the level of operating costs for electrical networks, is relevant. One of the ways to solve the problem of improving the accuracy of determining the location of a short circuit in the electrical network is the use of special technical means - short circuit clamps. The scheme of the normal regime of the 150 kV electric network of PJSC Kirovogradoblenergo was used for the research. The analysis of the configuration of this network showed that it has a number of substations that receive power from transmission lines, which are deaf branches. Therefore, the installation of short-circuit latches on such lines is necessary. The authors of the article propose the introduction of a radio channel to transmit information about the state of the network and the place of damage to the next personnel of the substation. The most appropriate ways to organize a radio channel are: the use of GSM networks; use of unlicensed frequency transmitters. Approximate calculations have been carried out, which confirm the possibility of creating a radio channel for transmitting information from the short-circuit lock for a distance of up to 20 km, using transceivers of non-licensed frequencies.Item Формування оптимальних енергетичних та теплотехнічних характеристик огороджувальних конструкцій будівель(ЦНТУ, 2022) Савеленко, І. В.; Петрова, К. Г.; Серебренніков, С. В.; Сіріков, О. І.; Savelenko, I.; Petrova, K.; Serebrennikov, S.; Sirikov, O.Досліджено особливості впливу термоізоляційних матеріалів на теплотехнічні та енергетичні показники огороджувальних конструкцій будівлі. Виявлено протилежний вплив густини деяких утеплювачів на опір теплопередачі. Методом експертних оцінок за техніко-енергетичним, фінансовим та екологічним критеріями обґрунтовано комплекс заходів з термомодернізації огороджувальних конструкцій. Доведено, що за нормативних значень опорів теплопередачі матеріалів огороджувальних конструкцій, без модернізації інженерних систем, досягти рекомендованого класу "С" енергоефективності будівлі не можливо. The purpose of the work is to study of options for thermal modernization of enclosing structures with a justification of the optimal composition of energy-saving measures to achieve maximum energy efficiency of buildings. Ukraine's energy balance shows that more than 30% of the total energy is consumed by the residential sector, of which up to 80% goes to heating. This is due to the low level of energy efficiency of the enclosing structures of residential buildings, as well as the unsatisfactory technical condition of utilities, due to physical wear and tear and obsolescence. The peculiarities of the influence of the type of thermal insulation materials and their characteristics on the thermal and energy performance of the building are investigated. It was found that the increase in the density of insulation affects the thermal resistance of walls in different ways - the density of mineral wool and extruded polystyrene have the opposite effect of foamed polystyrene, ie insulation of mineral wool or extruded polystyrene should be chosen with the lowest density Element-by-element analysis of the components of enclosing structures proved that their impact differs significantly, in the case of separate implementation of measures can reduce heat consumption by 0.07… 23%, and the priority is to modernize the walls of building facades (provided that the glazing ratio K ≤ 0 , 25). Measures of complex thermal modernization of enclosing structures are substantiated by the method of expert assessments according to technical-energy, financial and ecological criteria. Calculations confirm that the complex thermal modernization will reduce the value of specific energy consumption and specific greenhouse gas emissions by 1.5 times, specific heat consumption - by 1.9 times, increase the energy efficiency class of the building from G to D. It is shown that the normative values of heat transfer resistances of external enclosing structures will provide only the class D energy efficiency of the building. It is not possible to achieve the recommended class "C" and higher by further increasing the thermal resistance of the enclosing structures - it is necessary to modernize the engineering systems of the building.Item Пристрій для корекції психоемоційного стану людини(ЦНТУ, 2021) Щєпін, В. В.; Трушаков, Д. В.; Сіріков, О. І.; Shchiepin, V.; Trushakov, D.; Sirikov, O.Статтю присвячено результатам розробки електронного пристрою, що випромінює різнокольорові світлові ефекти для покращення психоемоційного стану людини. На основі проведеного аналізу існуючих пристроїв запропонована та виготовлена власна конструкція електронного приладу, що випромінює різнокольорові світлові ефекти, а також вимірює основні параметри навколишнього середовища - температуру, вологість та атмосферний тиск. Він здатний, за даними цих вимірювань, керувати пристроями зміни мікроклімату в середині приміщення, наприклад, кондиціонером, зволожувачем повітря, опаленням. Проведені експериментальні клінічні дослідження виготовленого пристрою в лікарні КНП «Обласна клінічна психіатрична лікарня Кіровоградської обласної ради» шляхом зняття енцефалограм головного мозку. Отримані позитивні результати, що підтверджують здатність розробленого пристрою впливати на психоемоційний стан людини. The article is devoted to the process of correction (improvement) of a person's psycho-emotional state by creating an electronic device that emits multicolored light effects. The set of researches carried out in the work represents the solved problems in the field of creation of electronic devices for medical purposes. On the basis of the analysis of existing devices, an own design of an electronic device is proposed, based on the emission of various light effects, which allows you to correct the psychoemotional state of a person. A working model of an electronic device has been manufactured, it emits multi-colored light effects, and also measures the main parameters of the environment - temperature, humidity and pressure. Experimental clinical studies of the manufactured device were conducted in the hospital of the Regional Clinical Psychiatric Hospital of the Kirovohrad Regional Council. Experimental clinical studies of the manufactured device were performed by taking encephalograms of the brain. Obtained positive results, confirming the ability of this device to improve the psycho-emotional state of a person.Item Методика визначення розрахункових навантажень промислових підприємств за питомою витратою електроенергії з використанням нестаціонарної моделі графіків електричних навантажень(ЦНТУ, 2019) Плєшков, П. Г.; Казанцев, Ю. І.; Сіріков, О. І.; Гарасьова, Н. Ю.; Величко, Т. В.; Плешков, П. Г.; Казанцев, Ю. И.; Сириков, А. И.; Гарасева, Н. Ю.; Pleshkov, P.; Kazantsev, Yu.; Sirikov, O.; Garasova, N.; Velichko, T.Запропонована методика визначення розрахункового електричного навантаження промислових підприємств за питомою витратою електроенергії та визначенням коефіцієнту максимуму на основі теорії ймовірності з використанням ергодичних теорем для нестаціонарних випадкових процесів. Дана методика може бути використана для визначення розрахункового електричного навантаження на вищих щаблях системи електропостачання - цех, корпус, підприємство. Предложенная методика определения расчетной электрической нагрузки промышленных предприятий за удельным расходом электроэнергии и определения коэффициента максимума на основе теории вероятности с использованием эргодических теорем для нестационарных случайных процессов. Данная методика может быть использована для определения расчетной электрической нагрузки на высших ступенях системы электроснабжения - цех, корпус, предприятие. The proposed methodology for determining the calculated electric load of industrial enterprises for the specific energy consumption and determining the coefficient maximum based on probability theory using ergodic theorems for non-stationary random processes. When designing power supply systems, the main initial value is the calculated electrical load. High demands are placed on the accuracy and correctness of determining the electrical load. The most common method for calculating the electrical loads of industrial enterprises is the method of ordered diagrams. It is recommended for use at the lower levels of power supply systems at the level of individual consumer groups, sections, workshops and buildings. At higher levels of electricity distribution, the application of this calculation method may be accompanied by significant errors. Therefore, its use for higher levels is not recommended. The specific energy costs of the workshops and the plant as a whole are determined using the main energy characteristics. It can be applied to certain similar enterprises. According to the specific norms of power consumption and the design performance data, the average power is determined. Knowing the average value for the time interval and the variance of the graph of the electrical load, as well as the distribution laws, it is possible to determine the estimated 30-minute maximum load for a given confidence probability. And by its value, the coefficient maximum. By multiplying the average power by the coefficient maximum, the desired design load is determined. The proposed method for calculating the electrical loads of industrial enterprises can be used for higher stages of the power supply system at the level of sections, workshops and the enterprise as a whole. The advantage of the proposed method, in contrast to the ordered diagram method, is the absence of the need to consider and take into account the characteristics of the operating modes of individual electric consumers.Item Проблеми визначення ефективності та ранжування енергоощадних заходів на об'єктах бюджетної сфери(ЦНТУ, 2019) Плєшков, П. Г.; Серебренніков, С. В.; Петрова, К. Г.; Савеленко, І. В.; Сіріков, О. І.; Плешков, П. Г.; Серебренников, С. В.; Петрова, Е. Г.; Савеленко, И. В.; Сириков, А. И.; Pleshkov, P.; Serebrennikov, S.; Petrova, K.; Savelenko, I.; Sirikov, O.Проаналізовано енергетичні особливості об’єктів бюджетної сфери за результатами енергоаудитів, розглянуто критерії оцінювання ефективності енергоощадних заходів та їх ранжування за пріоритетністю. Проанализированы энергетические особенности объектов бюджетной сферы по результатам энергоаудитов, рассмотрены критерии оценки эффективности энергосберегающих мероприятий, их ранжирование по приоритетности. The purpose of the work is to formulate and solve the problem of determining the energy efficiency of energy-saving measures when performing energy audits and ranking them by priority. We have developed investigation of energy flows of budgetary objects by conducting energy audits and finding ways to improve their energy efficiency by implementing energy-efficient measures. Energy peculiarities of the objects of the budget sphere according to the results of energy audits are analyzed, criteria of estimation of efficiency of energy saving measures and their ranking by priority are considered. Permanent tariff increases for all types of energy stimulate the search for energy savings, which will allow consumers to reduce their energy bills. In addition, to obtain financing from the state and / or local budgets, investments from international funds for the energy modernization of budgetary objects, it is necessary to justify a complex of energy-saving measures based on the results of the energy audit and the availability of energy certificates of buildings. Energy audits shows that the customer does not always clearly understand the priority of energy efficient measures and the real level of losses due to elements of fencing structures, in engineering systems of power supply, heating, ventilation etc. This leads to irrational allocation of funds for the implementation of energy efficient measures. Only a comprehensive energy audit of the building and its engineering systems will help the customer understand the tasks. The investment budget for energy efficiency measures is always limited and, as a rule, less than the amount of investment proposals, measures should be ranked in order to choose the most effective solutions. Choosing the criteria for ranking energy-saving measures is a difficult task that cannot always be based on technical and economic calculations, so it is important to search for natural and economic criteria by which energy-saving measures should be ranked in packages. The division of energy-saving measures into small and high-cost ones depends on the financial capacity of the customer and is therefore conditional. To obtain the correct results of calculating the savings from the implementation of energy-saving measures, it is necessary to focus on the baseline of energy consumption, which it is based on the design mode of operation and the regulatory microclimate in the premises. The problem of determining the baseline level of energy consumption is an urgent one and it needs further discussion and research.