Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
2 results
Search Results
Item Дослідження процесу формування у ґрунті вологоутримуючого шару(ЦНТУ, 2023) Дідух, В. Ф.; Цизь, І. Є.; Тарасюк, В. В.; Хомич, С. М.; Didukh, V.; Tsiz, І.; Tarasyuk, V.; Khomych, S.У статті наведені дослідження закономірності перерозподілу вологи від органічних добрив підвищеної вологості до шарів ґрунту для формування вологоутримуючого шару під час вирощування сільськогосподарських культур. Результати вказують на доцільність використання сапропелю природної вологості для формування поживного шару на піщаному ґрунті. З метою механізованого внесення сапропель доцільно змішувати із доступними органічними наповнювачами. Впровадження способу вирощування сільськогосподарських культур з широкорядним способом посіву, який передбачає створення у ґрунті смуг із органічних добрив підвищеної вологості може бути реалізований на основі модернізованого розкидача органічних добрив. The purpose of the article is to study the regularity of moisture redistribution from organic fertilizers of high humidity to soil layers for the formation of a moisture-retaining layer during the cultivation of agricultural crops. For research, soil, organic fertilizers of high humidity and soil again were laid in layers in cylindrical containers. The moisture content of the layers was measured every 7-10 days. As a result, a clear distribution of the humidity of the layers was found in all variants of the experiment. The minimum humidity is found in the upper layer. The greatest migration of moisture to the upper layer took place on clay soil and the application of organic fertilizer sapropel + chaff of wheat straw. The moisture accumulated in the middle layer of organic fertilizers migrated the most to the lower layer in all variants of the experiment with clay soil, where the equalization of moisture in the middle and lower layers occurred during the first 30 days of the study. In the variants of the experiment with sandy soil, the maximum moisture retention in the middle layer was found for the organic fertilizer sapropel + wood sawdust and sapropel + wheat straw chaff. In order to implement the process of forming a layer of fertilizers with increased soil moisture under the conditions of growing agricultural crops of the wide-row sowing method, a scheme of a modernized spreader of organic fertilizers is proposed. The revealed regularities indicate the expediency of using sapropel of natural humidity for the formation of a nutrient layer on sandy soil. For the purpose of mechanized application by the working bodies of machines for solid organic fertilizers, it is advisable to mix sapropel with available organic fillers. The introduction of a method of growing agricultural crops with a wide-row sowing method, which involves the creation of strips of organic fertilizers of high humidity in the soil, can be implemented on the basis of a modernized, according to the scheme given in the article, spreader of organic fertilizers.Item Вплив властивостей компонентів КМ (КП) на напружено-деформований стан і триботехнічні характеристики деталей СГТ(КНТУ, 2015) Аулін, В. В.; Кузик, О. В.; Носуленко, В. І.; Aulin, Viktor; Kuzyk, Oleksandr; Nosulenko, VictorРозглянуто різновиди контактування трибоелементів (ТЕ), зміцнених КМ (КП), які дозволяють істотно змінювати якість фізичного контакту, величину фактичної площі, здатність поверхневого шару (ПШ) ТЕ до еволюції складу і структури в процесі тертя та зношування. Виявлено ефективне гальмування руху дислокацій гетерогенними структурами КМ (КП), як при низьких, так і при високих температурах, а також рекристалізаційні процеси. Розглянуто напружений стан матеріалу ТЕ з КМ (КП) при терті. Отримано умову пластичної рівноваги компонентів у вигляді системи рівнянь та формула величини напруження при переході від матеріалу наповнювача до матеріалу матриці та визначено характер деформації, яким вони підлягають. Отримано вираз для критичного кута нахилу виступу і коефіцієнта тертя та проведена оцінка зміни коефіцієнта тертя. В процесі тертя і зношування ПШ КМ (КП) підлягає пружно-пластичному деформуванню, мало- або багато цикловому руйнуванню під силовим впливом, при протіканні теплових процесів та структурно-фазових перетворень, формуванню залишкових напружень різних знаків, спостерігається сумарний ефект силових, температурних та структурно-фазових залишкових напружень. The varieties of contact of triboelementov are considered tribo-element (TE), fortified composite material (CM) composition coating (CC), that allow substantially to change quality of physical contact, size of actual area, ability of superficial layer (SL) TE to the evolution of composition and structure in the process of friction and wear. The effective braking of motion of distributions the heterogeneous structures of CM(CC) is educed, both at subzero and at high temperatures, and also recrystallizations processes. The operating at a friction loading is distributed on hard fillers, that serve as opportune, barriers to movable distributions and reduce speed of flowage of matrix, that brings to the decline of intensity grasping over in a contact "matrix-matrix" and in a resiliently-plastic matrix there is relaxation of net voltages, minimum deformation and decline of probability of origin of cracks of tiredness. The tense state of material is considered TE of CM(CC) at a friction. The condition of plastic equilibrium of components as a system of equalizations and formula of size of tension are got in transition from material of filler to material of matrix and character of deformation is certain they are subject that. Expression for the critical angle of slope of performance and coefficient of friction and conducted estimation of change of coefficient of friction are got. In the process of friction and wear of SL CM(CC) subject to resiliently-plastic deformation, small- or much to cyclic destruction under power influence, at flowing of thermal processes and structurally-phase transformations, to forming of remaining tensions of different signs, there is a total effect of power, temperature and structurally-phase remaining tensions.