Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
3 results
Search Results
Item Елементи організації операційних технологій в рослинництві з урахуванням аграрних ризиків(ЦНТУ, 2023) Бурлака, О. А.; Келемеш, А. О.; Горбенко, О. В.; Burlaka, О.; Kelemesh, А.; Gorbenko, О.Тематика представленої статті охоплює системне оцінювання операційних технологій в галузі рослинництва, де одним з ключових факторів є імовірність недоотримання запланованих кінцевих результатів виробництва під впливом аграрних ризиків. Обґрунтування та вибір оптимальної технології вирощування та збирання певної групи сільськогосподарських культур є складною багатокритеріальною техніко-організаційною задачею. На практиці досить часто спостерігаються випадки, коли максимальні технічні, економічні організаційні, технологічні зусилля та витрати у рослинництві не приносять очікуваного запланованого результату щодо ефективності сільськогосподарського виробництва. При цьому постає актуальне практичне та прагматичне питання: чи доцільно в складних економічних та політичних умовах економіки країни використовувати максимум ресурсного, технічного та технологічного забезпечення виробничих процесів у рослинництві, якщо співвідношення «витрати – отриманий результат» може бути набагато менше очікуваних планових показників, і, при цьому, має місце значний вплив некерованих людиною факторів щодо вирощування та збирання сільськогосподарських культур, таких, як наприклад, агрокліматичні ризики. Вважаємо, що в такому варіанті, більш доцільно обирати технології навіть з меншим потенціалом ресурсного забезпечення, направлені на збільшення економічної стійкості виробництва у випадках настання збиткових виробничих результатів під впливом агрокліматичних ризиків. В даній публікації планування виробничих процесів щодо організації операційних технологій в рослинництві розглянемо на прикладі порівняння та вибору оптимального, за умови врахування агрокліматичних ризиків, варіанту, на прикладі вирощування та збирання озимої пшениці. The topic of the presented article covers the systematic evaluation of operational technologies in the field of crop production, where one of the key factors is the probability of failure to achieve the planned final production results under the influence of agrarian risks. Justification and selection of the optimal technology for growing and harvesting a certain group of agricultural crops is a complex multi-criteria technical and organizational task. At the same time, an urgent practical and pragmatic question arises: is it expedient in the difficult economic and political conditions of the country's economy to use the maximum of resource, technical and technological support of production processes in crop production, if the ratio "costs - the obtained result" can be much less than the expected planned indicators, and, at the same time, there is a significant influence of nonhuman- controlled factors regarding the cultivation and harvesting of agricultural crops.Item Оцінка шляхів використання відходів рослинницької продукції(ЦНТУ, 2018) Коломієць, Л. В.; Мартиненко, С. А.; Левицька, К. А.; Коломиец, Л. В.; Мартыненко, С. А.; Левицкая, К. А.; Kolomiyets, L.; Martinenko, S.; Levitska, K.Проаналізовано питання утворення та використання відходів рослинництва. Накреслено шляхи оптимізації поводження з відходами в умовах сьогодення. Доведено доцільність використання біопалива. Проанализирован вопрос образования и использования отходов растениеводства. Очерчены пути оптимизации обращения с отходами в нынешних условиях. Доказано целесообразность использования биотоплива. The purpose of the paper is to substantiate the necessity of recycling of secondary raw materials in agriculture, illumination of ways to use plant-based raw material waste as an alternative source of energy. The agricultural sector of Ukraine is highly developed, therefore, a large amount of crop production waste is generated annually. The production of grain and leguminous crops in Ukraine is about 40-50 million tons per year. In addition to the part of the harvest, about the same amount of waste produced, or by-products of plant production. Therefore, in farms where the growing of groups of cultivated plants is actively carried out, the wide introduction of technological lines for the processing of cultivars and the formation of pellets, granules and others. types of biofuels that can be used in modern fuel systems, boilers, etc. Having studied the world experience and domestic achievements in the field of development of the biofuel market, it is recommended to introduce equipment for the implementation of technological operations for the production of solid biofuels (fuel pellets) from plant biomass of agricultural crops according to the following scheme: large grinding, drying, fine grinding, moisturizing, pressing, cooling, packing. Large shredding is performed by stacking bales or straw rolls on the flatbed moving conveyors and feeding them as loading to the crusher. Large crushers grind the raw material for further drying. The grinding process should ensure that the particles are not more than 10 mm in size. Large shredding allows you to quickly and qualitatively prepare the raw material for drying and further processing in a small crusher. It was established that fuel raw material obtained from plant products does not cause significant pollution of the environment; is formed continuously; has a stable price, unlike traditional energy resources. Thus, today agriculture is a significant source of biomass production of secondary vegetable raw materials. Further definition of ways to increase plant biomass waste is necessary, since a certain part of them must be returned to the soil, and the surplus becomes an important reserve of alternative biofuels.Item Ситуаційне планування механізованих технологічних операцій у рослинництві(КНТУ, 2015) Шолудько, П. В.; Тригуба, І. Л.; Sholudko, Petro; Tryhuba, InnaРозроблена програма та алгоритм оцінки вибору машинних агрегатів за багатьма критеріями методом Паретто, які можуть бути реалізовані в умовах конкретного господарства незалежно від структури земельних угідь, посівних площ, технічної оснащеності. Адекватність розробленої моделі перевірена в умовах реального господарства. The article reveals analysis of scientific works as to situational planning and choice of effective machine-tractor units for fulfilment of technological operations in crop production. The work argues need to develop instruments for situational planning of mechanized technological operations in crop production. The research proposes an approach as to situational planning of mechanized technological operations in crop production, which is based on Pareto method and enables making of multi-criteria choice of machine-tractor units for fulfilment of technological operations. The authors have analyzed criteria of the choice of machine-tractors units for fulfilment of technological operations. It is proposed to make choice of machine-tractor units for fulfilment of technological operations in crop production according to overall index of quality of work fulfilment, productivity of the units, resource consumption of the operations, and composite index of harmful effects from the operations fulfilment. The authors have developed an algorithm and content solution of situational planning of mechanized technological operations in crop production, which are based on the proposed approach and make ground for correct managerial decisions as to choice of machine-tractor units for fulfilment of technological operations regardless of natural-climatic conditions of farms and their machine-tractor park.