Кафедра будівельних, дорожніх машин та будівництва
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/785
Browse
29 results
Search Results
Item Металеві конструкції. Для курсового проектування та виконання кваліфікаційних робіт(ЦНТУ, 2025) Пашинський, В. А.; Pashynskyi, V.Видання містить загальні методичні рекомендації, сортаменти прокатних профілів та довідкові дані, необхідні для проєктування сталевих конструкцій. Усі сортаменти відповідають чинним стандартам на сталевий прокат, найменування яких вказані в довідкових таблицях. The publication contains general methodological recommendations, assortments of rolled profiles and reference data necessary for the design of steel structures. All ranges comply with the current standards for rolled steel, the names of which are indicated in the reference tables.Item Металеві конструкції. До виконання курсової роботи "Сталевий каркас одноповерхової будівлі"(ЦНТУ, 2025) Пашинський, В. А.; Pashynskyi, V.Методичні рекомендації призначені для самостійного виконання курсової роботи здобувачами освітнього рівня "бакалавр". Наведені вказівки щодо змісту курсової роботи, рекомендації з розрахунків і конструювання основних елементів каркасу одноповерхової будівлі з посиланнями на нормативну та навчальну літературу, а також необхідні довідкові дані. Methodological recommendations for independent completion of course project by applicants for the "bachelor" educational level. Instructions are provided on the content of the course project, recommendations on the calculations and design of the main elements of the frame of a one-story building with references to regulatory and educational literature, as well as necessary reference data.Item Металеві конструкції. Практичні заняття(ЦНТУ, 2025) Пашинський, В. А.; Pashynskyi, V.Методичні рекомендації призначені для організації роботи на практичних заняттях та самостійної роботи здобувачів освіти. Наведені алгоритми вирішення типових розрахунково-конструкторських задач, які здобувачі освіти розв'язують на практичних заняттях та в процесі самостійного вивчення навчальної дисципліни. Перелік задач відповідає робочій програмі та силабусу дисципліни. Алгоритми супроводжуються посиланнями на нормативну та навчальну літературу, а також на додатки з необхідними довідковими даними. Methodological recommendations are intended for the organization of work in practical classes and during independent work of students. Algorithms for solving typical design and calculation problems, which students solve in practical classes and in the process of independent study of the academic discipline, are given. The list of tasks corresponds to the work program and the syllabus of the discipline. Algorithms are accompanied by references to normative and educational literature, as well as to appendices with the necessary reference data.Item Металеві конструкції. Самостійні роботи(ЦНТУ, 2025) Пашинський, В. А.; Pashynskyi, V.Методичні рекомендації призначені для допомоги у самостійному вивченні навчальної дисципліни "Металеві конструкції". Висвітлені питання відповідають робочій навчальній програмі та силабусу. У першу чергу дані рекомендації призначені для здобувачів освіти заочної форми навчання та студентів денної форми навчання, які навчаються за індивідуальним навчальним планом, але вони будуть корисні для всіх здобувачів освіти спеціальності "Будівництво та цивільна інженерія". Methodical recommendations are intended to help in independent study of the educational discipline "Metal structures ". The highlighted questions correspond to the working curriculum and syllabus. First of all, these recommendations are intended for students of part-time education and full-time education students who study according to an individual curriculum, but they will be useful for all students of the specialty "Construction and Civil Engineering".Item Providing the thermal reliability of window junctions during the thermal modernization of civil buildings(2020) Pashynskyi, M.; Dzhyrma, S.; Pashynskyi, V.; Nastoyashchiy, V.; Пашинський, М. В.; Джирма, С. О.; Пашинський, В. А.; Настоящий, В. А.In order to assess the possibility of condensation on an internal window jamb surface, the temperature fields of window junctions to brick and precast concrete walls of civil buildings were analyzed, which were massively produced in the second half of the twentieth century. This study obtained the dependences of the jamb temperature on the thickness of the additional insulation layer and the outdoor temperature. Additionally, it showed the possibility of adjusting the jamb temperature by shifting the window frame inside the building. Outside air temperatures at which no condensation will occur in the initial junction structures and after thermal modernization by additional facade insulation were determined. The results can be used to replace worn-out windows and during the thermal modernization of buildings.Item Статистичний аналіз результатів геодезичних зйомок колій мостових кранів у виробничих будівлях(ОДАБА, 2020) Пашинський, В. А.; Тихий, А. А.; Пашинський, М. В.; Пічугін, С. Ф.; Pashynskyi, V.; Tykhyi, A.; Pashynskyi, M.; Pichugin, S.Дослідження виконане на основі результатів геодезичних зйомок положення колій мостових кранів у машинобудівних цехах на протязі чотирьох років. Розроблена методика статистичного аналізу відхилень колій мостових кранів від проектного положення у плані та по висоті. Обрані види законів розподілу для імовірнісного опису відхилень, зокрема обґрунтована можливість використання розподілу модуля випадкової величини для опису відхилень, які контролюються без урахування знаку. Запропонована узагальнена характеристика стану кранових колій у вигляді імовірності виходу відхилень за встановлені нормами гранично допустимі межі. На прикладі двох цехів відображено позитивний вплив рихтування кранових колій на статистичні характеристики їх положення в плані. The studies were carried out in order to develop effective methodology for the statistical analysis of the results of geodetic surveys of the rails of overhead cranes. The findings will provide generalization of the measurement results, demonstration of their changes over time, as well as comparison with the permissible values of deviations from the design position. The analysis includes the results of geodetic surveys of the position of the rails of overhead cranes in machine-building shops during four years. The position of the heads of the crane rails was determined using a level, a transit theodolite, and a laser sight. In accordance with the requirements of regulatory documents for the operation of overhead cranes, three parameters of the position of the crane rail heads were controlled: the height difference on adjacent pillars of the same row; height difference on pillars of different rows in one transverse frame; deviation of the distance between the rails from the design value. The controlled parameters are random variables that should be analyzed by statistical methods. Deviations of the distance between the axes of the crane rails from the design value are presented in the form of a random variable with the normal distribution law. The differences in the elevation marks of the heads of the crane rails, which are monitored without taking into account the sign, are described by the distribution law of the modulus of a random variable. As a generalized characteristic of the state of crane rails, it is proposed to use the probabilities of horizontal and vertical deviations of the crane rails beyond maximum permissible values established by the norms. Based on the results of the research, conclusions were drawn about the need for systematic control of the position of overhead crane rails by geodetic methods, the applicability of the above distributions for the probabilistic description of deviations of crane rails from the design position, as well as the feasibility of using the probability of deviations of the crane rails geometry beyond the permissible values established by the norms.Item Досвід розрахунково-екпериментального оцінювання енергетичних показників будівлі школи(НУВГП, 2020) Настоящий, В. А.; Пашинський, В. А.; Пашинський, М. В.; Джирма, С. О.; Nastoiashchyi., V.; Pashynskyi, V.; Pashynskyi, M.; Dzhyrma, S.Висвітлена методика і результати оцінювання показників енергетичної ефективності будівлі школи з урахуванням теплових характеристик огороджувальних конструкцій, отриманих за даними вимірювань у процесі натурних обстежень. Проаналізовано вплив термомодернізації на клас енергетичної ефективності будівлі. During the examination, numerous damages of the outer wall cladding, unfilled seams between the wall blocks and poorly executed junction of window and door frames to a wall were revealed, where heat transfer is highly increased due to air leakage from the inside of the building. The actual values of the heat transfer resistance of walls and translucent structures, experimentally established using a thermohygrometer, do not meet the requirements of current standards. Examination of the outer walls and window blocks using a thermal imager revealed thermal anomalies that significantly reduce the thermal insulation characteristics of enclosure structures. It is noted that the use of technical devices makes it easy to detect thermal anomalies and to estimate the characteristics of enclosure structures. Based on the research results, an energy passport of the building was developed. The design value of specific energy consumption is 55.7 kW×h/m3. Taking into account the maximum value of 35 kW×h/m3 for educational institutions, that are a subject of thermal modernization, the building was examined and classified as energy efficiency class F. Design proposals have been developed for thermal modernization of the building by using ventilated facade systems with rockwool insulation. After thermal modernization, the specific energy consumption are reduced to 34.7 kW×h/m2, and the energy efficiency is improving to class C.Item Method of administrative-territorial zoning of the design parameters of air temperature(2019) Pashynskyi, V.; Pashynskyi, M.; Pushkar, N.; Skrynnik, I.; Пашинський, В. А.; Пашинський, М. В.; Пушкар, Н. В.; Скриннік, І. О.This study proposes a method of administrative-territorial zoning of the major design parameters of the air temperature. For each administrative region, the design values of the mean temperature of the year, the temperatures in the coldest and the warmest month, and the temperature of the coldest and the warmest day are set. These parameters can be applied during the building and in the structural design of the entire region. The study was conducted in Ukraine, however, is applicable to all countries.Item Вагові характеристики та галузі раціонального використання сталевих центрально стиснутих колон(ЛНТУ, 2019) Пашинський, В. А.; Пашинський, М. В.; Скриннік, І. О.; Дарієнко, В. В.; Pashynskyi, V.; Pashynskyi, M.; Skrynnik, I.; Dariienko, V.За результатами експериментального проектування центрально стиснутих сталевих колон шести типів виявлені залежності їх маси від висоти й навантаження. За укрупненими розцінками оцінена вартість виготовлення та монтажу колон різних типів. Результати роботи дозволяють орієнтовно встановити металоємність і вартість колон різних типів за відомою висотою й навантаженням та обрати раціональний тип колони. Six types of central compressed steel columns are considered: rolled and welded I-beams, square pipes, two channel bars connected via planks, four metal corners connected via planks or lattices. The experimental design of columns of all types was carried out with various combinations of heights up to 20 meters and the load on the column up to 9 MN. It is shown that the sections of welded I-beams, as well as four-branch columns connected via planks or lattices can be selected for all combinations of height and load within the specified limits. The areas of possible use of columns from rolled I-beams, square pipes and two channel bars connected via planks are limited by the serviceability limit and ultimate limit state of the rolled profiles from the respective assortments. According to the design results, the dependencies of the optimum cross-sectional dimension of the welded I-beams and four metal corners connected via planks or lattices on the load and the height of the column are established and described by analytical expressions. A unified type of analytical dependence of the linear mass of central compressed columns on their height and current load is proposed. The coefficients of these dependences for the columns of the six types are obtained by approximating the results of experimental design using the least squares method. According to the results of a comparative analysis, the areas of rational use of central compressed columns of six types are set according to the criteria of metal consumption and cost. In most cases, four metal corners connected via planks or lattices is characterized by the least metal consumption, but at low heights and high loads - welded I-columns. According to the cost criterion, in most cases it is better to have welded I-columns, and four metal corners connected via planks or lattices have the lowest cost at high heights and small longitudinal forces.Item The dataware of building structures reliability calculations under temperature effects(Polish Association for Wind Engineering, 2018) Pichugin, S.; Pashynskyi, V.; Kariuk, A.; Пічугін, С. Ф.; Пашинський, В. А.; Карюк, А. М.The statistical characteristics of random process of atmosphere air changes, needed for building structures reliability calculations, were generalized. The effects of additional geographical factors, influencing the temperature regime of the locality were analyzed: geographical altitude, proximity to the sea, long-term interannual temperature changes. Recommendations were given as to calculation of atmosphere air statistical characteristics, needed for estimated values normalization and for assessment of building structures reliability indicators.
- «
- 1 (current)
- 2
- 3
- »