Конструювання, виробництво та експлуатація сільськогосподарських машин. Загальнодержавний міжвідомчий науково-технічний збірник.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/19
Ідентифікатор медіа: R30-03925 (рішення Національної ради України від 25.04.2024 р. № 1418).
Мови видання: українська, російська, англійська, періодичність - один раз на рік.
Browse
2 results
Search Results
Item type:Item, Травмування зернового матеріалу гвинтовими робочими органами шнекових живильників(ЦНТУ, 2017) Куликівський, В. Л.; Палійчук, В. К.; Боровський, В. М.; Куликовский, В. Л.; Палийчук, В. К.; Боровский, В. Н.; Kulykivskyi, V.; Palіychuk, V.; Borovskyi, V.Представлено результати експериментальних досліджень живильників, які були направлені на визначення раціональних конструктивно-технологічних параметрів шнеків. Встановлено, що основний вплив на травмування зернового матеріалу живильником мають зазор між витками і кожухом, частота обертання гвинтового робочого органу та кут нахилу транспортувального шнека. Представлены результаты экспериментальных исследований питателей, которые были направлены на определение рациональных конструктивно-технологических параметров шнеков. Установлено, что основное влияние на повреждение зернового материала питателем имеют зазор между витками и кожухом, частота вращения винтового рабочего органа и угол наклона транспортировочного шнека. The purpose of the paper is to determine the dependence of the grain material injury on the parameters of screw feeders and to substantiate their optimal values. The greatest influence on the damage of grain material carries a gap between the turns of the screw working organ and the screw housing, its approximation to the size of the grain particles leads to increased destruction of individual grains. When the gap is less than the minimum size of the grains, it is practically not observed in the movement during the casing, and when the clearance is more than three average parts of the parts, a passively barely moving material layer forms on the bottom of the casing. The use of feeders with the minimum gap between the screw turns and the casing reduces grain damage by the screw working organ while maintaining the maximum process performance. Changing the angle of the screw feeder not only increases the specific energy consumption of the process, but also affects the growth of damage to the moving grain material.Item type:Item, Дослідження процесу травмування зерна гвинтовим конвеєром(КНТУ, 2016) Куликівський, В. Л.; Палійчук, В. К.; Боровський, В. М.; Kulykivskyi, V.; Palіychuk, V.; Borovskyi, V.Представлено результати експериментальних досліджень гвинтових конвеєрів та живильників, які були направлені на визначення раціональних конструктивних параметрів шнеків. Встановлено, що основний вплив на травмування зернового матеріалу конвеєром мають зазор між витками і кожухом та частота обертання гвинтового робочого органу. The greatest influence on grain material injury makes the gap between the coils and body assembly line, bringing it closer to the average grain size of particles leads to increased destruction of individual grains. At minimum gap smaller grains, jamming them in the process of moving to the body practically not observed, and if the gap more than three medium size pieces at the bottom of the shell is formed passive barely moving layer of material. Using a belt with a threshold gap between the turns and the body can reduce grain damage screw working body by almost half, while maintaining maximum process performance. Tilting the screw conveyor not only increases the specific energy process, but also affects the growth of material injury to grain that moved.