DSpace

Now showing 1 - 2 of 2

Розмірна обробка електричною дугою бічної поверхні зносостійкого інструменту
(ЦНТУ, 2018) Сіса, О. Ф.; Пукалов, В. В.; Юр’єв, В. В.; Сиса, О. Ф.; Юрьев, В. В.; Sisa, O.; Pukalov, V.; Yuryev, V.
Виконано обґрунтування технологічної схеми формоутворення зовнішньої бічної поверхні пуансону, способом розмірної обробки електричною дугою з урахуванням особливостей фізичних механізмів їх утворення та гідродинамічних явищ в міжелектродному проміжку. Встановлені аналітичні зв’язки технологічних характеристик процесу розмірної обробки електричною дугою твердого сплаву ВК8 з режимами обробки і геометричними параметрами. Выполнено обоснование технологической схемы формообразования внешней боковой поверхности пуансона, способом размерной обработки электрической дугой с учетом особенностей физического механизма образования и гидродинамических явлений в межэлектродном промежутке. Установлены аналитические связи технологических характеристик процесса размерной обработки электрической дугой твердого сплава ВК8 с режимами обработки и геометрическими параметрами. The article is devoted to development of the technology and equipment for rough machining of hard-face puncheon's lateral surface with electrical arc as a highly efficient alternative to the conventional methods of rough machining. In order to extend the durability period of the sheet material blanking die, the strong wearproof materials should be used. The hard-face axial puncheons are used due to high strength, hardness and wearproofness. The puncheons are made of the cylindrical hard-face cores, with diameter ranging from 2...20 mm. Then they are grinded. The cores are made of hard alloys with wolfram carbide grain size less than 1 µm, and the 8...25% of cobalt binding content. The cores are produced by the hard-face powder pressing and further sintering in vacuum-compressor furnace. When sintering the cores shrink, followed with the contraction process. The core bending may reach up to 0.35 mm and more. Such curve cores are not used for grinding. Therefore, the problem is to find some optional technologies of treating the hard-face cores for the puncheons. It is suggested to remove the puncheon's lateral surface with electrical arc at the stage of the hard-face blank treatment. This allows removing large allowances of material along with the shortest treatment time. It is suggested to produce the puncheon lateral surface with roughness of Ra = 16…30 µm following rough machining. Thus, the large allowances of material are removed with the shortest treatment time. Here, the treatment cycle of the hard-face puncheon's lateral surface reduces by 1.4...1.8 times. The substantiation was made for the process flow diagram covering fabrication of the hard-face puncheon's lateral surface subject to specifics of the physical mechanism of formation and the hydrodynamic phenomena in the inter-electrode gap. The analytical links were determined between the technological specifications of the process featuring ВК8 alloy rough machining with electrical arc, the processing modes and geometrical parameters. The resulting models enable managing the capacity, specific capacity, specific consumption of electric power and the treated surface accuracy, along with forecasting and optimizing these parameters. The technical solution is offered enabling to expand the processing capacities of the hard-face puncheon's production.
Обробка розмірною електричною дугою шестигранних порожнин пуансонів гарячого пресування
(КНТУ, 2016) Сіса, О. Ф.; Sisa, О.
Виконано обґрунтування технологічної схеми формоутворення поверхонь шестигранної порожнини пуансонів гарячого пресування головок болтів, способом розмірної обробки електричною дугою з урахуванням особливостей фізичних механізмів їх утворення та гідродинамічних явищ в міжелектродному проміжку. Встановлені аналітичні зв’язки технологічних характеристик процесу розмірної обробки електричною дугою сталі 5ХНМ з режимами обробки і геометричними параметрами. The article is dedicated to the development of technology and accessories of the method for processing of hexagonal cavities of hot-pressing punches by electrical arc, as high-performance alternative to traditional processing methods. An important factor in increasing the carrying capacity of heavy duty bolts is the increasing of the elasticity of the bolt head. This condition is fully met by the high-strength bolts with hexagon head produced by the method of hot pressing. The use of an elastic flange ensures continuous operation under alternating loadings without loss of pre-tightening efforts. When developing equipment and tools, it is necessary to take into account the conditions which ensure the formation of the bolt head. The most important parameter for pressing is the dimensional accuracy, hot impact resistance of the tool, material ductility, burr tool cavity walls, since the pressure force on the transmission side surface is proportional to the pressure in the longitudinal direction. It is found that the optimum parameters hex hot pressing punch cavity walls during the processing performance of M = 610 mm³ / min. by electrical arc, is the roughness Ra = 2,5..6,3 mkm that provides frictional force required to fill the cavity of the bolt head. It is suggested to get the hexagonal cavities of hot pressing punches by dimension electrical arc with the set roughness Ra = 2,5..6,3 mkm of side walls, which allows you to take great allowances material at the lowest cost to the processing time. At the same time the cycle of processing is decreased 2-4,5 times. The objectivation of technological scheme of formation of hexagonal cavities of hot pressing punches by dimension electrical arc was made taking into account features of the physical mechanism of formation and hydrodynamic phenomena in the electrode gap. The analytical processing characteristics of process of sizing by electric arc of steel 5HNM with treatment regimes and geometrical parameters were established.

Конструювання, виробництво та експлуатація сільськогосподарських машин. Загальнодержавний міжвідомчий науково-технічний збірник.

Browse

Filters

Settings

Sort By

Results per page

Search Results