Конструювання, виробництво та експлуатація сільськогосподарських машин. Загальнодержавний міжвідомчий науково-технічний збірник.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/19
Ідентифікатор медіа: R30-03925 (рішення Національної ради України від 25.04.2024 р. № 1418).
Мови видання: українська, російська, англійська, періодичність - один раз на рік.
Browse
7 results
Search Results
Item type:Item, Транспортування зерна сої гвинтовими робочими органами під час збирання та післязбиральної обробки(ЦНТУ, 2018) Куликівський, В. Л.; Боровський, В. М.; Палійчук, В. К.; Куликовский, В. Л.; Боровский, В. Н.; Палийчук, В. К.; Kulykivskyi, V.; Borovskyi, V.; Palіychuk, V.Представлено результати експериментальних досліджень технологічного процесу переміщення зерна сої, гвинтовими робочими органами збиральних та очисних машин, які були направлені на визначення раціональних конструктивно-технологічних параметрів транспортерів. Встановлено, що основний вплив на травмування зернового матеріалу транспортером мають зазор між витками і кожухом, частота обертання гвинтового робочого органу та вологість насіння сої. Представлены результаты экспериментальных исследований технологического процесса перемещения зерна сои, винтовыми рабочими органами уборочных и очистительных машин, которые были направлены на определение рациональных конструктивно-технологических параметров транспортеров. Установлено, что основное влияние на повреждение зернового материала транспортером имеют зазор между витками и кожухом, частота вращения винтового рабочего органа и влажность семян сои. When performing technological processes agricultural production the grain is repeatedly subjected to shocks, compression and friction, which is accompanied by damage to the surface and internal tissues of the seeds. The main cause of damage to the seeds is the mechanical action of the screw working bodies of the machines and tools during post-harvest processing, drying and transportation. A significant portion of damaged seeds appears already at the stage of soybean harvesting. The level of damage to the grain during harvesting depends on the perfection of the design of the harvesting machines, the modes of operation of their working bodies, the timing and methods of harvesting, and the physical and mechanical properties of the grain at the time of displacement. The purpose of the paper is to determine the dependence of the grain material injury on the parameters of screw feeders and to substantiate their optimal values. The greatest influence on the damage of grain material carries a gap between the turns of the screw working organ and the screw housing its approximation to the size of the grain particles leads to increased destruction of individual grains. The use of conveyors with a minimum gap between the screw and the housing allows reducing soybean grain damage by up to 0.2% as well as reducing the microscopic damage to seeds threefold while maintaining the maximum productivity of the process. Increasing the travel distance significantly affects the damage to the grain material. During the twofold transmission of soybean grain through a screw conveyor, the maximum damage to the seeds was 1.4 % of the total amount of transported grain. A doubling of the transportation distance led to a significant increase in grain damage, which reached 2.8 %. Damage to soybean grain by screw conveyors during harvesting depends on its humidity. With a high moisture content of the material, the screw working bodies deform the soybean seeds and the seed coat peels off. The decrease in humidity leads to a significant fragmentation of the grains by the working bodies of the conveyors. The optimal indicators of moisture content of soybean grain, in terms of the formation of macroscopic and microscopic damage to seeds, by a screw conveyor, are in the range of 13...15%.Item type:Item, Травмування зернового матеріалу гвинтовими робочими органами шнекових живильників(ЦНТУ, 2017) Куликівський, В. Л.; Палійчук, В. К.; Боровський, В. М.; Куликовский, В. Л.; Палийчук, В. К.; Боровский, В. Н.; Kulykivskyi, V.; Palіychuk, V.; Borovskyi, V.Представлено результати експериментальних досліджень живильників, які були направлені на визначення раціональних конструктивно-технологічних параметрів шнеків. Встановлено, що основний вплив на травмування зернового матеріалу живильником мають зазор між витками і кожухом, частота обертання гвинтового робочого органу та кут нахилу транспортувального шнека. Представлены результаты экспериментальных исследований питателей, которые были направлены на определение рациональных конструктивно-технологических параметров шнеков. Установлено, что основное влияние на повреждение зернового материала питателем имеют зазор между витками и кожухом, частота вращения винтового рабочего органа и угол наклона транспортировочного шнека. The purpose of the paper is to determine the dependence of the grain material injury on the parameters of screw feeders and to substantiate their optimal values. The greatest influence on the damage of grain material carries a gap between the turns of the screw working organ and the screw housing, its approximation to the size of the grain particles leads to increased destruction of individual grains. When the gap is less than the minimum size of the grains, it is practically not observed in the movement during the casing, and when the clearance is more than three average parts of the parts, a passively barely moving material layer forms on the bottom of the casing. The use of feeders with the minimum gap between the screw turns and the casing reduces grain damage by the screw working organ while maintaining the maximum process performance. Changing the angle of the screw feeder not only increases the specific energy consumption of the process, but also affects the growth of damage to the moving grain material.Item type:Item, Дослідження процесу травмування зерна гвинтовим конвеєром(КНТУ, 2016) Куликівський, В. Л.; Палійчук, В. К.; Боровський, В. М.; Kulykivskyi, V.; Palіychuk, V.; Borovskyi, V.Представлено результати експериментальних досліджень гвинтових конвеєрів та живильників, які були направлені на визначення раціональних конструктивних параметрів шнеків. Встановлено, що основний вплив на травмування зернового матеріалу конвеєром мають зазор між витками і кожухом та частота обертання гвинтового робочого органу. The greatest influence on grain material injury makes the gap between the coils and body assembly line, bringing it closer to the average grain size of particles leads to increased destruction of individual grains. At minimum gap smaller grains, jamming them in the process of moving to the body practically not observed, and if the gap more than three medium size pieces at the bottom of the shell is formed passive barely moving layer of material. Using a belt with a threshold gap between the turns and the body can reduce grain damage screw working body by almost half, while maintaining maximum process performance. Tilting the screw conveyor not only increases the specific energy process, but also affects the growth of material injury to grain that moved.Item type:Item, Визначення циркуляції вороху у молотарці зернозбирального комбайна(КНТУ, 2013) Герук, С. М.; Пустовіт, С. В.; Geruk, Stanislav; Pustovit, S.Викладено методику визначення закономірності циркуляції колосового вороху в молотарці комбайна, яка проводилась на експериментальній установці. Описано спосіб забарвлення насіння для визначення циркуляційних процесів.The determination methods of regularity of the ear heap circulation, which were held at the experimental laboratory plant, are explained. The way of the seed colouring for circulation processes determination is described. Conformity to law of circulation lots in the threshing machine of combine can be studied during work of row of the parallell set cleanings with a transmission ear lots to every following from them.The purpose of work is a search of ways of effective decline of injuring of grain at collection, research of process of circulation and separacii of components ear lots. Geared-up thus grain was used for a study conformity to law of circulation lots in the threshing machine of combine and its influence on the indexes of work of cleaning. For this purpose by us was the developed and made setting, that allows to define the size of the circulatory loading during three cycles.Item type:Item, Обгрунтування необхідної довжини сепаруючої поверхні нижнього решета очистки(КНТУ, 2015) Пустовіт, С. В.; Pustovit, SergiyОписано конструктивні параметри нижнього та верхнього жалюзійного решета та проведено обґрунтування необхідної довжини сепаруючої поверхні нижнього решета очистки. The aim of this work is to reduce injury to the grain during harvesting, by way of justification required length separating the bottom surface of the cleaning sieve. Describes the design parameters of the upper and lower louvered sieve and conducted substantiation required length separating the bottom surface of the cleaning sieve. Determined the length of flight of grains after impact along the line of the lower sieve and the flight time. The dependence for determining the necessary length of the lower louver sieve, cleaning of the combine.Item type:Item, Теоретичне обгрунтування винесення вільного зерна з решіт очищення в камеру колосового шнека зернозбирального комбайна(КНТУ, 2012) Пустовіт, С. В.; Pustovit, S.Викладено теорію винесення вільного зерна з решіт очистки в камеру колосового шнека зернозбирального комбайна. The theory of taking away of free grain is expounded from the sieves of cleaning in the chamber of ear шнека of combine harvester.Item type:Item, Вплив травмування на міцність насіння зернових культур(КНТУ, 2014) Дерев’янко, Д. А.; Derevyanko, D.В статті розглядаються дослідження травмування та руйнування зернівок від впливу зовнішніх та внутрішніх факторів. The paper considers the research of the weevil damage and compression as a result of inner and outer factors. The effects of damaging on the solidity of the cereal seeds. In the process of a constant weevils damaging a plastic zone appears at the end of a crack at the end of damaging the increase in pressure results in additional efforts in the zone of a plastic deformation. These additional efforts lead to the increase in microdamages which are the basis for the creation of the future weevils cracking resulting in their damaging. The nature of weevils damaging depends on the cracks size and guantity as well as on their location. Being taker together they effect the seeds solidity, that is their damages and deformities.