Конструювання, виробництво та експлуатація сільськогосподарських машин. Загальнодержавний міжвідомчий науково-технічний збірник.
Постійне посилання на фондhttps://dspace.kntu.kr.ua/handle/123456789/19
Ідентифікатор медіа: R30-03925 (рішення Національної ради України від 25.04.2024 р. № 1418).
Мови видання: українська, російська, англійська, періодичність - один раз на рік.
Перегляд
6 результатів
Результати пошуку
Тип:Документ, Морфологічні ознаки і фізико-механічні властивості насіння дрібнонасінних культур(ЦНТУ, 2020) Алієв, Е. Б.; Лупко, К. О.; Aliiev, E.; Lupko, C.; Алиев, Э.Б.Актуальність роботи полягає в дослідженні закономірностей впливу фізико-механічних властивостей насіння дрібнонасінних культур на їх подальшу очистку та сепарацію. Досліджено вплив вологості насіння на їх фізико-механічні властивості. Встановлено, що щільність насіння зростає з підвищенням вологості, що призводить до збільшення кута природнього ухилу насіння. В результаті досліджень аеродинаміки насіння отримані залежності швидкостей витання від геометричних параметрів насіння, з яких встановлено що із збільшення геометричних розмірів насіння швидкість їх витання збільшується лінійно для кожної дрібнонасінної культури. To create a database and systematize the seeds of samples of small-seeded crops, it is necessary to determine the patterns of influence of morphological parameters on their physical and mechanical properties. The development of the latest technologies and technical devices for cleaning and separation is possible due to the understanding of the characteristic morphological parameters for each of the small-seeded crops. The aim of the research is to determine the physical and mechanical properties of the seed material of small-seeded crops (mustard, flax, ryegrass, rapeseed), necessary to increase the efficiency of their cleaning and separation processes. To achieve this goal, a plan of experimental research was developed, which provided for the determination of physical and mechanical parameters of seeds of small-seeded crops, namely: indicators that characterize the flowability of seeds (angle of natural bias); frictional properties of seeds (static coefficient of friction); porosity (density) and density; size and mass characteristics of seeds (length, width, thickness, effective diameter, weight of 1000 seeds). It is established that the physical and mechanical properties of seeds of small-seeded crops are greatly influenced by its humidity. With increasing humidity, the performance of the test material increases. This is due to the fact that with increasing humidity, the shape of the seed almost turns into a spherical, which, in turn, leads to an increase in the curvature of the surface and reduce the points of contact between the seeds. As a result, the angle of natural inclination increases. The coefficient of friction of seeds of small-seeded crops depends on the roughness of the friction surface and decreases with increasing humidity. This is due to the fact that with increasing humidity decreases the forces of molecular attraction of the seed coat to the surface of the material. Seed density increases with increasing humidity. From this we can conclude that the absorption of moisture by the investigated material increases the total weight of the seed, and as a result - increases its specific weight. Актуальность работы заключается в исследовании закономерностей влияния физико-механических свойств семян мелкосемянных культур на их дальнейшую очистку и сепарацию. Исследовано влияние влажности семян на их физико-механические свойства. Установлено, что плотность семян возрастает с повышением влажности, что приводит к увеличению угла естественного уклона семян. В результате исследований аэродинамики семена получены зависимости скоростей витания от геометрических параметров семян. Установлено, что с увеличением геометрических размеров семян скорость их витания увеличивается линейно для каждой мелкосеменной культуры.Тип:Документ, Обґрунтування раціонального співвідношення дугової довжини вакуумної камери та кількості комірок висівного диска пневмомеханічних вакуумних висівних апаратів(ЦНТУ, 2019) Осипов, І. М.; Сисоліна, І. П.; Осипов, И. Н.; Сысолина, И. П.; Osypov, I.; Sysolina, I.Встановлено, що значні резерви в підвищенні якості розподілу насіння сівалками з пневмомеханічними вакуумними висівними апаратами по площі живлення містяться в зменшенні пульсації величини розрідження в вакуумній камері за рахунок раціонального співвідношення її дугової довжини та кількості комірок висівного диска. Запропоновано математичний вираз для визначення пріоритетного ряду кількості комірок висівного диска для висівних апаратів з певною дуговою довжиною вакуумної камери. Результати теоретичних досліджень експериментально підтверджені в лабораторних умовах. Установлено, что значительные резервы в повышении качества распределения семян сеялками с пневмомеханическими вакуумными высевающими аппаратами по площади питания имеются в уменьшении пульсации величины разрежения в вакуумной камере за счет рационального соотношения ее дуговой длины и количества ячеек высевающего диска. Предложена математическая формула определения приоритетного ряда количества ячеек высевающего диска высевающих аппаратов с определенной дуговой длиной вакуумной камеры. Результаты теоретических исследований экспериментально подтверждены в лабораторных условиях. Considerable backlogs in upgrading of distribution of seed by seeders with pneumomassage vacuum seedmeters areally feed are contained in reduction of pulsation of size of rarefaction in a vacuum chamber. One of reasons of such pulsation is dependence of coefficient of hydraulic resistance of vehicles on the amount of cells of sowing disk, being in the zone of a vacuum chamber. Influence of this dependence is special strongly shows up at sowing of large seed sowing disks with the cells of large-break, and also in pneumomassage seedmeters with small angular length of a vacuum chamber. Thus, in the pneumomechanical seeding machine of the SUPN-8A seeder, the angular value of the vacuum chamber is 2700. When using a seeding disk with 14 cells that are evenly spaced in a circle, 10 or 11 cells are in the area of the vacuum chamber at different points in time. It results in a decrease (11 cells) or an increase (10 cells) of the vacuum in the vacuum chamber. The condition of being of permanent amount of cells of sowing disk in the zone of a vacuum chamber is set and the priority row of amount of cells is got for the pneumomassage seedmeters of a vacuum type with the fixed angular length of a vacuum chamber. Taking into account the requirement, a priority number of cells of the seeding disk of pneumomechanical seeding devices of vacuum type with an angular value of vacuum chamber 270º was obtained: 4, 8, 12, 16, 20, 24, 28, etc. Experimental verification of working hypothesis and formed mathematical model confirmed their adequacy. Quality indexes of work of seedmeter with offer disks higher than indexes during work of seedmeter with serial disks. The coefficient of variation of unevenness of distribution of seed along a row went down from 55-73% to 37-48%. For the pneumomassage seedmeters of a vacuum type with the fixed angular length of a vacuum chamber, rational correlation of angular length of a vacuum chamber and amount of cells of sowing disk it is necessary to count such at that there is simultaneous included of one cell in the zone of a vacuum chamber and exit of other cell from the zone of a vacuum chamber. For a pneumomassage vacuum seedmeter with angular length of a vacuum chamber 270º a rational amount of cells is 16 and 24 units.Тип:Документ, Обґрунтування технологічних параметрів зернового сепаратора(ЦНТУ, 2019) Богатирьов, Д. В.; Скриннік, І. О.; Юрченко, О. В.; Богатырев, Д. В.; Скринник, И. О.; Bohatyrov, D.; Skrynnik, I.; Yurchenko, O.Проведено аналіз існуючих типів зернових сепараторів. Встановлено взаємозв’язок властивостей псевдозрідженого шару і окремої зернини з конструктивними, кінематичними та аеродинамічними параметрами сепаратора. Враховано дію випадкової лобового тиску; пульсації повітряного потоку; ексцесу та асиметрії епюр тисків, відповідно, в повздовжньому та поперечному перетині пневматичного каналу; висоти розташування дільників зернового шару. Обґрунтовано граничні режими роботи сепаратора та верхню межу його продуктивності за умови досягнення максимального технологічного ефекту сепарації. Наведені експериментальні закономірності основних кінематичних та геометричних параметрів запропонованого сепаратора, які суттєво впливають на технологічні показники його роботи. Проведен анализ существующих типов зерновых сепараторов. Установлена взаимосвязь свойств псевдоожиженного слоя и отдельной зерна с конструктивными, кинематическими и аэродинамическими параметрами сепаратора, при наличии факторов: случайного действия силы лобового давления; наличии пульсации воздушного потока; эксцесса и асимметрии эпюр давлений, соответственно, в поперечном и продольном сечении пневматического канала; высот установки делителей слоя. Обоснованно предельные режимы работы сепаратора и верхнюю границу его производительности при достижении максимального технологического эффекта сепарации. Приведенные экспериментальные закономерности влияния основных геометрических и кинематических параметров предложенного сепаратора на технологические показатели его работы. The article is developed the problem to pneumatic-impulsive separation according to density. Harvesting is one of the important operations in agribusiness. Wheat grain is selected according to different indicators. They are all correlated with grain density. Grain density affects the yield and nutrition of the produce. The analysis of modern equipment has indicated a new direction of research. The purpose of the work is formulated: increase of efficiency and productivity of the process of separation of seeds by density in the state of fluidization; reducing energy consumption through the use of pulsating airflow. Analysis of the designs of modern separators indicated the way of modernization of the separator. The authors proposed to replace fluctuations sieves pulsation air. This will reduce energy costs and improve quality performance. To confirm the idea, the authors developed a new separator. Structurally, it consists of two parts: the first creates the required flow of air, and the second - divides the grain by density. The second part is a pneumatic duct with a partition. The grain is filled with a conveyor in the hopper. The flap in the hopper regulates the flow of grain into the pneumatic duct. The channel is horizontally divided by a partition. The partition transmits air. On the partition, the grain layer is fluidized. A pulsator is installed between the fan and the duct. It consists of an electric motor and a damper. During operation of the electric motor, the damper closes the pneumatic channel or open. This creates a ripple of air in the pneumatic duct beneath the partition. The pneumatic duct has two flaps for changing the speed and pressure diagrams. The flaps adjust the quality of the separation. Grain was classified into three fractions. The first fraction is light grains with a density of 1000-1100 kg / m3. The second fraction - medium grains with a density of 1101-1200 kg / m3. The third fraction is heavy with a density greater than 1200 kg / m3. Grain was classified by dividers at the outlet of the pneumatic duct. Experimental researches confirmed expedience of the use of pulsator by setting of him in a pneumatic channel for replacement of swaying motion of sounding board on a pulsating blast. The analysis of existing types of grain separators is carried out. The properties of the fluidized bed and the individual grain are correlated with the design, kinematic and aerodynamic parameters of the separator, with the following factors: random force of frontal force; the presence of ripple air flow; excess and asymmetry of pressure plots, respectively, in the transverse and longitudinal sections of the pneumatic channel; the height of the layer dividers. The boundary modes of operation of the separator and the upper limit of its productivity are substantiated, provided that the maximum technological effect of separation is achieved. The experimental regularities of the influence of the basic geometric and kinematic parameters of the proposed separator on the technological parameters of its operation are presented.Тип:Документ, Розробка і калібрування блока вимірювання об’ємної маси потоку насіннєвого матеріалу соняшнику(ЦНТУ, 2019) Алієв, Е. Б.; Алиев, Э. Б.; Aliyev, E.Одним з елементів пропонованої раціональної прецизійної технологічної лінії процесів сепарації супер елітного насіннєвого матеріалу соняшнику є вібропневматичний сепаратор. Для вирішення недоліків відомого обладнання, а саме низької продуктивності і якості виконання операцій сепарації, очищення та розділення неоднорідної насіннєвої суміші за об’ємною масою на фракції, необхідно застосовувати автоматизовану систему керування, яка заснована на використані датчика об’ємної маси потоку насіннєвої суміші. Розроблено і проведено калібрування блока вимірювання об’ємної маси адаптивного вібропневматичного сепаратора. В результаті порівняння отриманих значень із традиційним методом вимірювання об’ємної маси (ДСТУ 4694:2006) за розрахованим критерієм Пірсона (χ 2) нормальність розподілу похибок вимірювань складає 2,13, більше за табличне значення χ 2(0,95;5) = 1,15. Поведена перевірка гіпотези про однорідність значень за допомогою критерію Кохрена G = 0,39Тип:Документ, Критерії оцінки якості процесу сепарації насіннєвої суміші(ЦНТУ, 2018) Алієв, Е. Б.; Алиев, Э. Б.; Aliiev, E.В результаті досліджень запропоновані узагальнюючі критерії якості виконання технологічного процесу сепарації насіннєвого матеріалу. Для технологічного процесу сепарації насіннєвої суміші, в результаті якого фракція компонента безперервно розподіляється вздовж лінії розроблено коефіцієнт розподілу. А для технологічного процесу сепарації, в результаті якого фракція компонента розподіляється дискретно, в якості узагальнюючого критерію прийнято сумарну концентрацію насіння проходу і сходу. В результате исследований предложены обобщающие критерии качества выполнения технологического процесса сепарации семенного материала. Для технологического процесса сепарации семенной смеси, в результате которой фракция компонента непрерывно распределяется вдоль линии разработан коэффициент распределения. А для технологического процесса сепарации, в результате которой фракция компонента распределяется дискретно, в качестве обобщающего критерия принято суммарную концентрацию семян прохода и схода. The breeding and seeding process requires the use of a variety of seed separators that not only purify the seed mixture from organic and inorganic impurities, but also allow the seed material to be grouped according to the physical and mechanical properties and morphological features. To assess the quality of the separation of the seed mixture on separators and seed treatment machines and technical means, it is necessary to use generalizing criteria. The analysis of literary sources showed the absence of a single generalizing and universal criterion for evaluating the quality of the separation process of seed material. Thus, the goal is to develop a generalization criterion for assessing the quality of the separation process of the seed mixture, which allows a comparative evaluation of the work of separators. Fraction of the mixture - a fraction of the seed mixture, obtained as a result of its separation by the specified physical-mechanical or morphological properties. The component fraction is a fraction containing 100% of the component that corresponds to certain physico-mechanical or morphological properties. In this case, the fraction of the mixture may include different fractions of components in different ratios. To the ideal fraction of the mixture is a single fraction of the component. As a result of the research, generalization criteria of the quality of the seed process separation process are proposed. For the technological process of seed separation separation, in which the fraction of the component is continuously distributed along the line, a distribution coefficient is developed. And for the technological process of separation, in which the fraction of the component is distributed discretely, as a generalization criterion, the total concentration of seeds of the passage and east is taken.Тип:Документ, Фізико-математичний апарат пружно-демпферної взаємодії насінин під дією вібруючого решета(ЦНТУ, 2017) Алієв, Е. Б.; Алиев, Е. Б.; Aliev, E.Контактні явища є одними з найбільш цікавих проблем дослідження молекулярної динаміки. Складність проблеми з контактами обумовлена принаймні трьома аспектами. Перший аспект полягає в нелінійному граничному стані в області контакту, обумовленого обмеженням проникності. Параметри області контакту, що включають режим ковзання, розподіл напруги, форма і розмір області та інші невідомі до аналізу. Другий аспект – це опис фрикційних явищ, які звичайно не мають простих рішень. Третім аспектом є матеріальна та геометрична нелінійність. Враховуючи зазначені аспекти необхідно визначити фізико-математичний апарат пружно-демпферної взаємодії в рамках переміщення насінини по вібруючому решету. Мета досліджень є розробка фізико-математичного апарата пружно-демпферної взаємодії насінин під дією вібруючого решета. Дослідження проводились з використанням методів аналітичної геометрії, теоретичної механіки і молекулярної динаміки. В результаті досліджень розроблено фізико-математичний апарат пружно-демпферної взаємодії насінин під дією вібруючого решета, який буде покладений в основу методу дискретних елементів і штрафного підходу для виявлення контактів та розрахунків сил контактної взаємодії насінин і поверхні решета. Розглянуті контакти насінин між собою і поверхнею решета при різних умовах демпфування, тертя та зчеплення. Контактные явления являются одними из наиболее интересных проблем исследования молекулярной динамики. Сложность проблемы с контактами обусловлена по крайней мере тремя аспектами. Первый аспект заключается в нелинейном предельном состоянии в области контакта, обусловленного ограничением проницаемости. Параметры области контакта включают режим скольжения, распределение напряжения, форма и размер области, и другие неизвестные для анализа. Второй аспект – это описание фрикционных явлений, которые обычно не имеют простых решений. Третьим аспектом является материальная и геометрическая нелинейность. Учитывая указанные аспекты необходимо определить физико-математический аппарат упруго-демпферного взаимодействия в рамках перемещения семена по вибрирующему решету. Цель исследований заключается в разработке физико-математического аппарата упруго-демпферного взаимодействия семян под действием вибрирующего решета. Исследования проводились с использованием методов аналитической геометрии, теоретической механики и молекулярной динамики. В результате исследований разработан физико-математический аппарат упруго-демпферного взаимодействия семян под действием вибрирующего решета, который будет положен в основу метода дискретных элементов и штрафного подхода для выявления контактов и расчетов сил контактного взаимодействия семян и поверхности решета. Рассмотрены контакты семян между собой и поверхностью решета при различных условиях демпфирования, трения и сцепления. The aim of the research is to develop a physical and mathematical apparatus for the elastic-damper interaction of seeds under the action of a vibrating sieve. The studies were carried out using methods of analytical geometry, theoretical mechanics, and molecular dynamics. Contact phenomena are one of the most interesting problems of studying molecular dynamics. The complexity of the problem with contacts is due at least to three aspects. The first aspect is the nonlinear limiting state in the contact region due to the restriction of permeability. Parameters of the contact area include slip mode, voltage distribution, shape and size of the area, and other unknowns for analysis. The second aspect is a description of frictional phenomena, which usually do not have simple solutions. The third aspect is the material and geometric nonlinearity. Taking these aspects into account, the physical and mathematical apparatus of elastic-damper interaction in the framework of the movement of seeds on a vibrating sieve was determined during the research. As a result of the research, a physico-mathematical apparatus for the elastic-damper interaction of seeds under the action of a vibrating sieve was developed, which will be used as a basis for the method of discrete elements and the penalty approach for identifying contacts and calculating the contact forces of seeds and the sieve surface. Contacts of seeds between themselves and the sieve surface under various conditions of damping, friction and adhesion are considered.