Конструювання, виробництво та експлуатація сільськогосподарських машин. Загальнодержавний міжвідомчий науково-технічний збірник.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/19
Ідентифікатор медіа: R30-03925 (рішення Національної ради України від 25.04.2024 р. № 1418).
Мови видання: українська, російська, англійська, періодичність - один раз на рік.
Browse
5 results
Search Results
Item Техніко-технологічні рішення інтенсифікації перероблення конопляної сировини(ЦНТУ, 2023) Шейченко, В. О.; Коропченко, С. П.; Дудніков, І. А.; Скоряк, Ю. Б.; Сало, Я. М.; Sheychenko, V.; Koropchenko, S.; Dudnikov, S.; Skoryak, Yu.; Salo, Ya.Розроблено технологію перероблення конопляної соломи в однотипний луб із заданим вмістом костриці та довжиною. Встановлено, що збільшення інтенсивності дій робочих органів на оброблюваний луб зменшує вміст костриці як у крупностебловій так і у дрібностебловій фракціях стебел. Закостриченість лубу характеризувалася: для дрібностеблової фракції – 13,8, середньостеблової – 11,2, крупностеблової – 10,8%, відповідно. Використання другого та третього етапів перероблення забезпечує одержання лубу з закостриченістю 0,8, 1,7 і 1,9%, відповідно. Розроблено експериментальну універсальну лінію виробництва однотипного волокна із трести конопель, соломи конопель, трести льону-довгунця із стандартними показниками якості - рівнем закостриченності волокна та лубу конопель не більше 5%. Розроблено та виготовлено лінію перероблення луб’яних культур. До основних переваг лінії віднесено: можливість використання в невеликих господарствах, перероблення трести конопель різної якості та ступеня вилежуваності, простота конструкції, низькі показники металоємності та енергоспоживання, невеликі габарити, можливість переробляти сировину як з рулону, так і з тюка, одержання волокна або лубу з низьким відсотком закостриченості (не перевищує 5%, а за умов перероблення трести зимового приготування – до 1%), висока продуктивність (перероблення до 1тони трести за годину). The technology of processing hemp straw into the same type of straw with a given content of firewood and length has been developed. It was established that increasing the intensity of the actions of the working organs on the processed rind reduces the content of the pith both in the large-stemmed and in the small-stemmed fractions of the stems. The spiciness of the forehead was characterized as follows: for the small-stemmed fraction – 13.8, medium-stemmed – 11.2%, large-stemmed – 10.8%, respectively. The use of the second and third stages of processing ensures the production of lobules with a sharpening of 0.8, 1.7 and 1.9%, respectively. An experimental universal line for the production of the same type of fiber from hemp tow, hemp straw, long flax tow has been developed with standard quality indicators - the level of fiber and hemp husk no more than 5%. A line for the processing of bast crops was developed and manufactured. The main advantages of the line include: the possibility of use in small farms, the processing of hemp, hemp of different quality and degree of laying, simplicity of construction, low indicators of metal content and energy consumption, small dimensions, the possibility of processing raw materials both from a roll and from a bale, obtaining fiber or pulp from a low percentage of astringency (does not exceed 5%, and under the conditions of winter preparation trust processing - up to 1%), high productivity (processing up to 1 ton of trust per hour).Item Дослідження умов різання стебел із ковзанням(ЦНТУ, 2021) Шейченко, В. О.; Дудніков, І. А.; Шевчук, В. В.; Шевчук, В. Г.; Sheichenko, V.; Dudnikov, I.; Shevchuk, Vitaliy; Shevchuk, ViktorВ статті досліджено підвищення ефективності функціонування ріжучих апаратів сільськогосподарських машин завдяки удосконаленню режимів різання стебел із ковзанням. Завдяки цьому уможливлюються умови різання із меншими значеннями нормального тиску, ніж за умов різання без ковзання. За стандартних значень показників жниварки з ріжучим апаратом та якісному різанні стебел рослин із ковзанням збільшення продуктивності складає до 17 %. Features of cutting of a stalk by a blade with sliding are analytically investigated. The conditions of cutting with sliding of a horizontally located stalk with a knife are substantiated, according to which the blade must press on the stalk perpendicular to it and move at an angle ξ to the normal. The marked angle must be greater than the friction angle φ. The limits of change of values of the angle ξ at which cutting of stalks with sliding is possible are analyzed and defined. It is noted that to ensure cutting of the stem with sliding, as well as to simultaneously and rationally reduce the sliding time of the blade on the stem, it is advisable to perform the operation of cutting stems at an angle ξ less than 90 °. The dependence determined by the conditions of observance by the angle ξp of the zone of the desired action of the velocity point of the blade point to ensure cutting of the stems with sliding is established. The theoretical dependence for determining the sliding coefficient is established, which allows to numerically estimate the degree of sliding. It is noted that cutting with sliding requires less force N, less normal pressure than non-slip cutting. Under such conditions, an increase in the angle ξ leads to a corresponding decrease in the force N. The implementation of the results of the study in the cutting machines of harvesters, forage machines, as well as segmental cutters of reciprocating movement of harvesters, will allow due to the quality of the technological process of cutting plant stems with sliding increase in productivity up to 17%.Item Зерно кукурудзи – фактор зменшення енергетичної залежності України(ЦНТУ, 2019) Шейченко, В. О.; Дудніков, І. А.; Шевчук, В. В.; Шевчук, М. В.; Шейченко, В. А.; Дудников, И. А.; Sheychenko, V.; Dudnikov, I.; Shevchuk, V.; Shevchuk, M.Встановлено економічну доцільність використання зерна кукурудзи в якості енергетичного матеріалу для виробництва теплової енергії за умов, коли вартість двох тонн зерна кукурудзи не перевищує вартості 1000 м3 природного газу. Для бюджетних організацій та промислового споживача економічно доцільно використовувати для потреб отримання теплової енергії зерно кукурудзи замість природного газу. Відмічено, що для відмічених категорій споживачів у 2014 року вартість теплової енергії, виробленої із газу в 1,91 рази перевищувала показники енергії, отриманої із зерна кукурудзи, у 2015 р. – у 1,32 рази, у 2016р – 1,08 рази, у 2017р. – 1,17 рази, у 2018 р. – 1,19 рази відповідно. Відмічено, що для населення та підприємств Теплокомуненерго, що виробляють теплову енергію для потреб населення, за умов цін на природний газ у 2016-2018рр. економічно не доцільно використовувати зерно кукурудзи для отримання теплової енергії. Установлено экономическую целесообразность использования зерна кукурузы в качестве энергетического материала для производства тепловой энергии в условиях, когда стоимость двух тонн зерна кукурузы не превышает стоимости 1000 м3 природного газа. Для бюджетных организаций и промышленного потребителя экономически целесообразно использовать для нужд получения тепловой энергии зерно кукурузы вместо природного газа. Отмечено, что для отмеченных категорий потребителей в 2014 году стоимость тепловой энергии, произведенной из газа в 1,91 раза превышала показатели стоимости энергии, полученной из зерна кукурузы, в 2015 - в 1,32 раза, в 2016 - 1,08 раза, в 2017. - 1,17 раза, в 2018 - 1,19 раза соответственно. Отмечено, что для населения и предприятий Теплокоммунэнерго, которые производят тепловую энергию для нужд населения, в условиях цен на природный газ 2016-2018г. экономически не целесообразно использовать зерно кукурузы для получения тепловой энергии. The article is devoted to solving the urgent problem of ensuring the energy independence of Ukraine through the use of renewable energy sources of vegetable origin. The conditions of economic feasibility of using corn grain as energy material for heat production by different categories of consumers - budget organizations, industrial enterprises, population and enterprises of Teplocomunenergo, which produce heat for the needs of the population of Ukraine, are considered and investigated. Based on the analysis of the energy equivalent of corn and natural gas, it can be concluded that, provided that the cost of two tonnes of grain does not exceed the value of 1000 m3 of gas, it is economically feasible to use corn grain as energy raw material for heat production. Analyzing this proposal for different categories of consumers in Ukraine, we used an approach based on assumptions regarding the evaluation of corn grain combustion efficiency compared to the 20 million tonne corn grain market, the purchase of the corresponding natural gas combustion, and generation of thermal energy. Based on the calculations, the corn and natural gas cost changes diagrams are presented and the cost of heat produced from corn and natural gas for different categories of Ukrainian consumers. It has been found that it is economically feasible to meet the needs of budgetary organizations and industrial enterprises to obtain corn grain heat instead of gas. At the same time, it is economically expedient for the population to use corn grain for heat only in 2015 prices. In other periods, such actions are not economically feasible. The economic feasibility of using corn grain as an energy material for thermal energy production has been established, provided that the cost of two tons of corn grain does not exceed the value of 1000 m3 of natural gas. It has been found that it is economically feasible for budget organizations and industrial consumers to use corn grain instead of natural gas for heat energy. It was noted that in 2014, the value of heat produced from gas was 1.91 times higher than the energy obtained from corn, in 2015 - 1.32 times, in 2016 - 1.08 times, in 2017. - 1.17 times, in 2018 - 1.19 times, respectively.Item Підвищення довговічності ґрунтообробних робочих органів(ЦНТУ, 2017) Дудніков, А. А.; Дудніков, І. А.; Дудник, В. В.; Горбенко, О. В.; Лапеннко, Т. Г.; Дудников, А. А.; Дудников, И. А.; Горбенко, А. В.; Dudnikov, A.; Dudnikov, I.; Dudnik, V.; Gorbenko, A.; Lapenko, T.Проаналізована математична модель прогнозування довговічності робочих органів ґрунтообробних машин з метою вибору ефективного методу їх відновлення. Проанализирована математическая модель прогнозирования долговечности рабочих органов почвообрабатывающих машин с целью выбора эффективного метода их восстановления. The mathematical model of prediction of durability of working bodies of soil-working machines with the purpose of choosing the method of their restoration is analyzed. The process of formation of the geometry of the working surface during its restoration by reinforcing surfacing has been researched and its influence on the increase of durability of the cutting element of the stiffened cultivar leg is estimated. As a result of the conducted research the power characteristic, taking into account the frictional forces acting in the process of working on the arrowhead cultivar paw, is calculated, the density of the distribution of the size of the wear element of the cutting element is calculated.Item Оцінка надійності машин та шляхи її підвищення(КНТУ, 2011) Дудніков, І. А.; Dudnikov, I.Розглядаються питання надійності машин і шляхи її досягнення. The questions the reliability of machines and ways to achieve it.