Конструювання, виробництво та експлуатація сільськогосподарських машин. Загальнодержавний міжвідомчий науково-технічний збірник.

Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/19

Ідентифікатор медіа: R30-03925 (рішення Національної ради України від 25.04.2024 р. № 1418). Мови видання: українська, російська, англійська, періодичність - один раз на рік.

Browse

Search Results

Now showing 1 - 4 of 4
  • Item
    Огляд методів балансування навантаження в хмарних системах
    (ЦНТУ, 2021) Минайленко, Р. М.; Резніченко, В. А.; Конопліцька-Слободенюк, О. К.; Поліщук, Л. І.; Minailenko, R.; Reznichenko, V.; Konoplitska-Slobodenyuk, O.; Polishchuk, L.
    В статті проведено огляд методів балансування навантаження в хмарних системах. Показано, що існуючі методи балансування навантаження хмарних систем мають обмежене використання і на даний час універсальної системи балансування навантаження не існує. Крім того, ні один із розглянутих методів не враховує такі важливі складові систем як мережа і дискова підсистема. Методи балансування навантаження хмарних систем вимагають вдосконалення, метою якого повинна бути можливість повного моніторингу системи для задоволення вимог користувачів і розробників. Cloud systems are currently the most popular concept of information systems and are the result of the evolution of a chain of methods for their construction. The main task of cloud technologies is to create a virtual cloud system consisting of virtual distributed resources. These resources provide remote provisioning of cloud access services with the required level of customer service Analysis and load balancing in cloud systems is quite an urgent task, as most open access cloud systems use simple load schedulers for their physical servers. The problem of load balancing requires a solution not when the server unexpectedly failed in the process of working on the task, which discourages users from using such a product, but at the very beginning of the project. In the early stages of design, it is acceptable to increase capacity by connecting new servers or using code optimization algorithms. But when a certain limit is reached, these measures become insufficient. The article reviews the methods of load balancing in cloud systems. It is shown that the existing methods of load balancing of cloud systems have limited use and currently there is no universal load balancing system. In addition, none of the considered methods takes into account such important components of systems as network and disk subsystem. Load balancing methods for cloud systems require improvement, the purpose of which should be the ability to fully monitor the system to meet the requirements of users and developers.
  • Item
    Аналіз факторів перерозподілу насіння при роботі дискових сошників
    (КНТУ, 2005) Шмат, С. І.; Резніченко, В. А.
    В статті розглянуті фактори, які погіршують якісні показники роботи дискових сошників. Основними недоліками є утворення в зоні між дисками “горбика” та захоплення частини насіння обертаючими дисками, що призводить до зміни глибини загортання насіння, виносу його на поверхню. Нова конструкція сошника усуває ці недоліки завдяки дообладнанню його п’ятою, установленою між дисками. In the article the factors, which worsen qualitative parameters, are analised. The main lacks are formations of ”lumps” in a zone between the disks and gearing of a part of seeds by rotating disks, which leads to the change in depth of seeding, bearing-out of seeds on the surface. The new design ploughshare eliminates these lacks due to its improvement by heel, set between disks.
  • Item
    Визначення форми напрямної кривої скидача п’яти сошника
    (КНТУ, 2008) Шмат, С. І.; Філімоніхін, Г. Б.; Гончаров, В. В.; Резніченко, В. А.
    В статті проведено теоретичне обґрунтування форми напрямної кривої скидача п’яти сошника, яка забезпечує зменшення перерозподілення насіння в борозні по глибині та довжині рядка. In the article the theoretical ground of form of sending curve is resulted for an up cast on the heel of coulter, which provides diminishing of redistribution of seed in a furrow on a depth and length of row.
  • Item
    Дослідження удосконаленого сошника зернової сівалки
    (КНТУ, 2006) Шмат, С. І.; Резніченко, В. А.
    В статті приведені теоретичні та експериментальні дослідження роботи удосконалених дводискових сошників, обладнаних нерухомою п‘ятою, встановленою в нижній частині міждискового простору. Дослідження показали, що удосконалений сошник зернової сівалки покращує розподілення насіння по глибині, а також розміщення сходів по ширині рядка. In clause are given theoretical and experimental researches of job advanced two-disk coulter, equipped motionless heel, established in the bottom part of interdisk space. The researches have shown, that improved coulter of a grain seeder improves distribution grains on depth, and also accommodation rostocks on width line.