Конструювання, виробництво та експлуатація сільськогосподарських машин. Загальнодержавний міжвідомчий науково-технічний збірник.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/19
Ідентифікатор медіа: R30-03925 (рішення Національної ради України від 25.04.2024 р. № 1418).
Мови видання: українська, російська, англійська, періодичність - один раз на рік.
Browse
7 results
Search Results
Item Обґрунтування технологічних параметрів зернового сепаратора(ЦНТУ, 2019) Богатирьов, Д. В.; Скриннік, І. О.; Юрченко, О. В.; Богатырев, Д. В.; Скринник, И. О.; Bohatyrov, D.; Skrynnik, I.; Yurchenko, O.Проведено аналіз існуючих типів зернових сепараторів. Встановлено взаємозв’язок властивостей псевдозрідженого шару і окремої зернини з конструктивними, кінематичними та аеродинамічними параметрами сепаратора. Враховано дію випадкової лобового тиску; пульсації повітряного потоку; ексцесу та асиметрії епюр тисків, відповідно, в повздовжньому та поперечному перетині пневматичного каналу; висоти розташування дільників зернового шару. Обґрунтовано граничні режими роботи сепаратора та верхню межу його продуктивності за умови досягнення максимального технологічного ефекту сепарації. Наведені експериментальні закономірності основних кінематичних та геометричних параметрів запропонованого сепаратора, які суттєво впливають на технологічні показники його роботи. Проведен анализ существующих типов зерновых сепараторов. Установлена взаимосвязь свойств псевдоожиженного слоя и отдельной зерна с конструктивными, кинематическими и аэродинамическими параметрами сепаратора, при наличии факторов: случайного действия силы лобового давления; наличии пульсации воздушного потока; эксцесса и асимметрии эпюр давлений, соответственно, в поперечном и продольном сечении пневматического канала; высот установки делителей слоя. Обоснованно предельные режимы работы сепаратора и верхнюю границу его производительности при достижении максимального технологического эффекта сепарации. Приведенные экспериментальные закономерности влияния основных геометрических и кинематических параметров предложенного сепаратора на технологические показатели его работы. The article is developed the problem to pneumatic-impulsive separation according to density. Harvesting is one of the important operations in agribusiness. Wheat grain is selected according to different indicators. They are all correlated with grain density. Grain density affects the yield and nutrition of the produce. The analysis of modern equipment has indicated a new direction of research. The purpose of the work is formulated: increase of efficiency and productivity of the process of separation of seeds by density in the state of fluidization; reducing energy consumption through the use of pulsating airflow. Analysis of the designs of modern separators indicated the way of modernization of the separator. The authors proposed to replace fluctuations sieves pulsation air. This will reduce energy costs and improve quality performance. To confirm the idea, the authors developed a new separator. Structurally, it consists of two parts: the first creates the required flow of air, and the second - divides the grain by density. The second part is a pneumatic duct with a partition. The grain is filled with a conveyor in the hopper. The flap in the hopper regulates the flow of grain into the pneumatic duct. The channel is horizontally divided by a partition. The partition transmits air. On the partition, the grain layer is fluidized. A pulsator is installed between the fan and the duct. It consists of an electric motor and a damper. During operation of the electric motor, the damper closes the pneumatic channel or open. This creates a ripple of air in the pneumatic duct beneath the partition. The pneumatic duct has two flaps for changing the speed and pressure diagrams. The flaps adjust the quality of the separation. Grain was classified into three fractions. The first fraction is light grains with a density of 1000-1100 kg / m3. The second fraction - medium grains with a density of 1101-1200 kg / m3. The third fraction is heavy with a density greater than 1200 kg / m3. Grain was classified by dividers at the outlet of the pneumatic duct. Experimental researches confirmed expedience of the use of pulsator by setting of him in a pneumatic channel for replacement of swaying motion of sounding board on a pulsating blast. The analysis of existing types of grain separators is carried out. The properties of the fluidized bed and the individual grain are correlated with the design, kinematic and aerodynamic parameters of the separator, with the following factors: random force of frontal force; the presence of ripple air flow; excess and asymmetry of pressure plots, respectively, in the transverse and longitudinal sections of the pneumatic channel; the height of the layer dividers. The boundary modes of operation of the separator and the upper limit of its productivity are substantiated, provided that the maximum technological effect of separation is achieved. The experimental regularities of the influence of the basic geometric and kinematic parameters of the proposed separator on the technological parameters of its operation are presented.Item Модель зміни шпаруватості псевдорозрідження шару насіння на каскадах зерносушарки(КНТУ, 2008) Петренко, М. М.; Скриннік, І. О.; Скриннік, М. О.; Богатирьов, Д. В.; Кислун, О. А.В статті розглянуто гідродинамічну модель псевдорозрідження насіння в зерносушарці каскадного типу. Наведені дослідження, які дозволяють теоретично визначити закономірності зміни порозності псевдорозрідженого шару відносно крупних частинок в залежності від зміни швидкості газу в апараті. In the article motion of seed is considered for to the cascades of the installation for dry grain in the booling layer. Researches which allow in theory to define the structural parameters of dryer taking into account the features of motion of seed are resulted.Item Вплив основних параметрів зерносушарки каскадного типу на процес сушіння зернових культур у псевдорозрідженому стані(КНТУ, 2008) Сало, І. М.; Скриннік, І. О.В статті наведено експериментальні дослідження і встановлені основні закономірності впливу параметрів зерносушарки каскадного типу на якісні показники роботи під час сушіння насіння в киплячому шарі. In the article motion of seed is considered for to the cascades of the installation for dry grain in the booling layer. Researches which allow in theory to define the structural parameters of dryer taking into account the features of motion of seed are resulted.Item Математична модель руху насіння по каскадам зерносушарки каскадного типу(КНТУ, 2011) Скриннік, І. О.; Яцун, В. В.; Дарієнко, В. В.; Богатирьов, Д. В.; Федотова, М. О.; Skrynnik, I.; Jatsun, V.; Darienko, V.; Bogatyrev, D.; Fedotova, M.В статті розглянуто рух насіння по каскадам зерносушарки. Наведені дослідження, які дозволяють теоретично визначити конструктивні параметри сушарки з урахуванням особливостей руху насіння. In the article motion of seed is considered for to the cascades of the installation for dry grain in the booling layer. Researches which allow in theory to define the structural parameters of dryer taking into account the features of motion of seed are resulted.Item Гідродинамічна модель процесу сушіння насіння сільськогосподарських культур для продовольчих потреб(КНТУ, 2011) Скриннік, І. О.; Федотова, М. О.; Петренко, М. М.; Кислун, О. А.; Богатирьов, Д. В.; Skrunnik, I.; Fedotova, M.; Petrenko, M.; Kyslun, O.; Bogatyryov, D.Наведено теоретичні дослідження для визначення параметрів киплячого шару в залежності від параметрів сушарки для отримання раціональних параметрів процесу сушіння. Теоретичні дослідження направленні на зменшення енергетичних витрат. An theoretical study to determine the parameters of a boiling layer, depending on drying parameters for rational parameters of the drying process. Theoretical studies directed to reduce energy costs.Item Визначення впливу основних параметрів при експерементальних дослідженнях сушіння зернового матеріалу в киплячому стані(КНТУ, 2012) Скриннік, І. О.; Яцун, В. В.; Дарієнко, В. В.; Богатирьов, Д. В.; Карпушин, C. О.; Федотова, М. О.; Skrynnik, I.; Yatsun, V.; Darienko, V.; Bogatyrev, D.; Karpushin, S.; Fedotova, M.В статті наведено експериментальні дослідження і встановлені основні закономірності впливу параметрів зерносушарки каскадного типу на якісні показники роботи під час сушіння насіння в киплячому шарі. In the article motion of seed is considered for to the cascades of the installation for dry grain in the booling layer. Researches which allow in theory to define the structural parameters of dryer taking into account the features of motion of seed are resulted.Item Експериментальні дослідження впливу параметрів зерносушарки каскадного типу на показники роботи(КНТУ, 2006) Петренко, М. М.; Скриннік, І. О.; Богатирьов, Д. В.; Скриннік, М.О.В статті наведені експериментальні дослідження і встановленні основні закономірності впливу параметрів зерносушарки каскадного типу на якісні показники роботи під час сушіння насіння в киплячому шарі. In the article motion of seed is considered for to the cascades of the installation for dry grain in the booling layer. Researches which allow in theory to define the structural parameters of dryer taking into account the features of motion of seed are resulted.