Конструювання, виробництво та експлуатація сільськогосподарських машин. Загальнодержавний міжвідомчий науково-технічний збірник.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/19
Ідентифікатор медіа: R30-03925 (рішення Національної ради України від 25.04.2024 р. № 1418).
Мови видання: українська, російська, англійська, періодичність - один раз на рік.
Browse
4 results
Search Results
Item Комп’ютерна модель процесу автоматичного динамічного зрівноваження двома автобалансирами крильчатки осьового вентилятора(КНТУ, 2013) Олійниченко, Л. С.; Філімоніхін, Г. Б.; Olijnichenko, Lubov; Filimonikhin, GennadyУ САПР SolidWorks модернізовано 3D модель осьового вентилятора з автобалансиром у обтічнику встановленням другого автобалансира на хвостовик вала електродвигуна. Із використанням модуля Cosmos Motion проведено обробку, налагодження і тестування моделі. Модернізована 3D модель призначена для комп’ютерного моделювання процесу динамічного зрівноваження крильчатки з ротором електродвигуна двома автобалансирами. We study the process of dynamic balancing of the axial fan impeller by two ball auto-balancers whis using SolidWorks CAD software and its module Cosmos Motion. For this were upgraded computer model of an axial fan with ball auto-balancer in the radome of fan by installing a second auto-balancer on a shaft of the engine. Thus with the help of CAD SolidWorks were created the parts of second auto-balancer and added to the assembly. With the module Cosmos Motion were set kinematic relations and interaction force between the parts of the new auto-balance. Debugging and testing of a computer model was conducted of elementary problems whose solutions are known and the simulation results are easily interpreted. As a result the resulting model is the computer analog of the full-scale stand with the same characteristics. It is suitable for the virtual multi- factorial and full- factorial experiments to select the optimal parameter values of fan and auto-balancers. With using of the created model were investigated the effect of gravity and the parameters of an imbalance in the auto-balancing process.Item Диференціальні рівняння для дослідження стійкості основних рухів гнучкого двоопорного ротора з пасивними авто балансирами(КНТУ, 2011) Філімоніхін, Г. Б.; Гончаров, В. В.; Filimonikhin, G.; Goncharov, V.Отримано в безрозмірному вигляді псевдозгорнуту замкнуту систему диференціальних рівнянь для дослідження стійкості основних рухів гнучкого незрівноваженого ротора на двох податливих опорах з автробалансирами. Розглянуто частинний випадок системи – трьох масова модель ротора. The pseudo folded closed system of differential equations in dimensionless form has been obtained for investigation of motion stability of flexible unbalanced rotor on two foil bearings with self-balance devices. As particular case, the three-mass model of rotor has been examined.Item Диференціальні рівняння руху системи, складеної з незрівноваженого ротора з нерухомою точкою, корпуса і автобалансира(КНТУ, 2010) Філімоніхін, Г. Б.; Гончаров, В. В.; Filimonikhin, G.; Goncharov, V.Отримані диференціальні рівняння руху системи, що складається із статично незрівноваженого ротора з нерухомою точкою, важкого в'язко-пружно закріпленого корпуса, в який встановлений ротор, і кульового чи роликового автобалансира для зрівноваження ротора. При цьому застосована методика складання спрощених диференціальних рівнянь руху роторних систем з автобалансирами, заснована на припущенні про малість лінійних і кутових відхилень подовжньої осі ротора, і про малість маси дисбалансу і корегувальних вантажів в порівнянні з масою ротора. Are obtained the differential equations of motion of the system consisting of statically unstable rotor with a fixed point, heavy viscid-elastic resilient corps which a rotor is set in, and ball autobalancer for balancing of rotor. Were applied the method of drafting of the simplified differential equations of motion of the rotor systems with autobalancer, which based on supposition about the trifle of linear and angular rejections of longitudinal axis of rotor, and about the trifle of mass of unbalance and correcting masses on comparison with mass of rotor.Item До визначення умов зрівноваження швидкообертових роторів сільськогосподарських машин пасивними автобалансирами(КНТУ, 2012) Філімоніхін, Г. Б.; Філімоніхіна, І. І.; Filimonikhin, G.; Filimonikhina, I.Обґрунтований енергетичний метод визначення умов настання автобалансування при зрівноваженні роторів на осесиметричних опорах пасивними автобалансирами, заснований на використанні функції Гамільтона. Метод застосований до найбільш актуальної для сільськогосподарських машин моделі ротора, що здійснює просторовий рух і динамічно зрівноважується двома автобалансирами. Is proved possibility of application of the Hamilton`s function to the study of quantity and terms of stability of the set motions of the system made from a rotor and added to him corrective masses. A method is applied to the most actual for agricultural machines model of rotor which execute space motion and is dynamically counterbalanced by two autobalancers.