Конструювання, виробництво та експлуатація сільськогосподарських машин. Загальнодержавний міжвідомчий науково-технічний збірник.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/19
Ідентифікатор медіа: R30-03925 (рішення Національної ради України від 25.04.2024 р. № 1418).
Мови видання: українська, російська, англійська, періодичність - один раз на рік.
Browse
2 results
Search Results
Item Аналітичні дослідження контактного руху легких домішок у пневмосепаруючому каналі(ЦНТУ, 2017) Нестеренко, О. В.; Петренко, Д. І.; Павленко, І. І.; Лещенко, С. М.; Гончарова, С. Я.; Nesterenko, О.; Petrenko, D.; Pavlenko, I.; Leschenko, S.; Honcharova, S.Враховуючи складність та випадковість пневмосепараційного процесу, на який впливає значна кількість факторів, є необхідним вирішення наукового завдання щодо встановлення закономірностей контактної взаємодії легких домішок з зерном в зоні пневмосепарації. В статті розглянуто контактний рух легких домішок через багатошаровий зерновий потік в вертикальному пневмосепаруючому каналі (ПСК) при їх багаторівневому одношаровому введенні. Отримані теоретичні залежності, які дозволяють встановити закономірності впливу основних конструктивно-технологічних параметрів ПСК на якість процесу сепарації. The separation of grain materials in the air separation channel occurs in rather difficult conditions, since light impurities, which are located in the lower cereal layers for the separation into the sediment chamber, require, with a minimum change in trajectory, to cross all above-placed seed moving in a downward direction. As a result of this movement there is a contact between light impurities and grain, which significantly affects the quality of cleaning. Therefore, a very important task is the analytical research aimed at investigating the contact interaction of light impurities with grain in the air separation channel and its effect on the quality of separation. Taking into account the multilevel feeding of the material in the PSC it is necessary to determine its influence on the qualitative parameters of the separation process and the establishment of the basic laws of the interaction of light impurities with grain material in the working area of the PSC. As a result of the theoretical analysis, the regularity of the contact motion of light impurities is established at the multilevel feeding of grain material in the PSC, which allows to obtain the averaged trajectories of impurities after interaction with grain layers during aerodynamic separation. It is determined that the allocation of light impurities depends on their time and velocity through the grain layers, which vary depending on the angle of contact of impurities with grain, as well as from the place of installation of the upper point of the output of grain hɠ.ɜ.. With six-level introduction of the material with the placement of grain particles in the direction of movement in the PSC with an interval equal to their size (2R) the place of installation of the upper point of the output of grain hɠ.ɜ. must be at a height hɠ.ɜ.= 0,05 ... 0,055 m relative to the level I of the input. The purpose of further researches should be to determine the qualitative characteristics of pneumatic separation in the contact interaction of grain material with air flow at its multilevel introduction into the PSC.Item Попередні дослідження альтернативних джерел створення повітряного потоку в пневмоінерційних зерноочисних машинах(КНТУ, 2009) Васильковський, М. І.; Васильковський, О. М.; Лещенко, С. М.; Петренко, Д. І.; Vasilkovskiy, M.; Vasilkovskiy, A.; Leschenko, S.; Petrenko, D.В статті проведено огляд та аналіз джерел повітряного потоку, які працюють в схемах ЗОМ загального призначення, відмічені їх основні переваги та недоліки, окреслені напрямками подальшого вдосконалення. Запропоновано використання лопатевого ротора, як багатофункціонального робочого органу, який, крім функції створення повітряного потоку, пересуває зерно по підсівному решеті та вивантажує його із машини. Визначені основні конструктивні особливості запропонованого робочого органу та приведені елементи розрахунку деяких параметрів ротора. Представлені результати попередніх досліджень запропонованого робочого органу при створенні ним повітряного потоку. A review and analysis of sources of current of air, which work in the charts of grain cleaners the general setting, is conducted in the article, marked their basic advantages and failings with the outlined directions of subsequent perfection. The use of blade rotor is offered, as a multifunction working organ which except for the function of creation of current of air moves grain after a sieve and the last unloads from a machine. The basic structural features of the offered working organ are certain and the elements of calculation of some parameters of rotor are resulted. The results of previous researches of the offered working organ are presented at creation by him current of air.