Центральноукраїнський науковий вісник. Технічні науки. Випуск 5. Частина 1. - 2022
Permanent URI for this collectionhttps://dspace.kntu.kr.ua/handle/123456789/12335
Browse
Search Results
Item type:Item, Прогнозування параметрів кузовних машин для внесення твердих органічних добрив(ЦНТУ, 2022) Лімонт, А. С.; Лімонт, З. А.; Limont, A.; Limont, Z.Мета статті полягала в обґрунтуванні тенденції зміни основних масово-розмірних параметрів кузовних машин для внесення твердих органічних добрив залежно від їх вантажопідйомності. Здійснений аналіз конструкцій машин виробництва підприємствами на території колишнього Радянського Союзу та сучасної України. Методи дослідження базувалися на вивченні основних споживчих параметрів машин з використанням відомостей, що наведені в Каталогах сільськогосподарської техніки і рекламній інформації підприємств-виробників кузовних машин. Опрацювання і узагальнення зібраних даних здійснені на засадах кореляційно-регресійного аналізу та з використанням стандартних комп’ютерних програм. За факторіальну ознаку в дослідженні прийнята вантажопідйомність машин, а за результативні – їх маса та габаритні довжина, ширина і висота. З’ясовано, що залежно від вантажопідйомності машин їхні габаритні довжини і висота зростають за прямолінійними залежностями з визначеними кутовими коефіцієнтами. Зміна габаритної ширини кузовних машин для внесення твердих органічних добрив залежно від вантажопідйомності машин описується рівнянням зростаючої гіперболи. The purpose of the article was to substantiate the trend of changing the basic mass and dimensional parameters of body machines for the application of solid organic fertilizers depending on their capacity. The analysis of constructions of machines of production by the enterprises in the territory of the former Soviet Union and modern Ukraine is carried out. The research methods were based on the study of the main consumer parameters of machines using the information provided in the Catalogs of agricultural machinery and advertising information of enterprises-manufacturers of body machines. Processing and generalization of the collected data is carried out on the basis of correlation-regression analysis and using standard computer programs. The load-bearing capacity of the machines was taken as a factorial feature in the study, and their weight and overall length, width and height were taken as effective. The range of variation, arithmetic mean, standard deviation and coefficient of variation of factorial and performance characteristics are determined. There is a positive correlation between the mass of body machines, their overall length, width and height and load capacity of the machines with correlation coefficients of 0.959, respectively; 0.9000; 0.721 and 0.864 for correlation ratios of performance traits to factorial in the same sequence 0.960; 0.862; 0.859 and 0.840. According to certain correlation indicators, depending on the load capacity of the machines, the effective characteristics should increase. To finally clarify the nature and form of communication, the experimental values of the performance characteristics were aligned depending on the load capacity of the machines by the equations of direct power and logarithmic functions and exponents and hyperbolas. According to the calculated R2-coefficients, the best approximation to the experimental values of machine mass and overall length and height was provided by approximation of their change depending on load capacity by equations of lines with positive angular coefficients, and to experimental values of dimensional width by approximation of. It was found that depending on the load capacity of machines, their overall lengths and heights increase in a straight line with certain angular coefficients. The change in the overall width of the body machines for the application of solid organic fertilizers depending on the load capacity of the machines is described by the equation of increasing hyperbola.Item type:Item, Коренева система рослин і характеристики стебел льону-довгунця(ЦНТУ, 2022) Лімонт, А. С.; Лімонт, З. А.; Limont, A.; Limont, Z.В статті досліджені характеристики стебел льону-довгунця залежно від маси коріння однієї рослини та її частки в загальній масі рослин. В якості характеристик стебел прийняті висота рослин, маса насіння з однієї рослини, зігнутість стебел, кількість рослин з рівним стеблом (%), вміст деревини в 10-сантиметровому відрізку стебла на відстані від сім’ядольних листочків до 10 см, 10–20 і 20–30 см, а також вихід волокна з технічної частини стебла. На підставі кореляційно-регресійного аналізу експериментальних даних про масу коріння однієї рослини льону-довгунця, а також частку маси коріння в загальній масі рослин і досліджуваних характеристик стебел, які наведені в літературних джерелах, з’ясовано, що зміна висоти рослин, маси насіння з однієї рослини, кількості рослин з рівним стеблом (%) та вмісту деревини в 10-сантиметровому відрізку стебла на відстані до 10 см від сім’ядольних листочків залежно від частки маси коріння в загальній масі рослин описується рівняннями прямолінійної регресії з додатними кутовими коефіцієнтами. Залежно від цієї ж факторіальної ознаки зміна зігнутості стебел описується рівнянням спадної степеневої функції. The aim of the article was to study the characteristics of long flax stalks depending on the mass of roots of one plant and its share in the total mass of plants. The characteristics of the stems are the height of plants, seed weight per plant, curvature of stems, number of plants with flat stems (%), wood content in a 10-centimeter segment of the stem at a distance of cotyledons up to 10 cm, 10-20 and 20 -30 cm, as well as the output of the fiber from the technical part of the stem. The range of variation of the mass of absolutely dry roots of one plant ranged from 89 to 192 mg for arithmetic mean and standard deviation of 138 and 29.3 mg, respectively, and the coefficient of variation of the empirical distribution of root mass of one plant of the analyzed long flax varieties 21.2%. The share of root mass in the total mass of plants ranged from 19.5 to 32.9%. The main statistical indicators of empirical distributions of the found out characteristics of stalks of flax plants have been determined. Based on correlation-regression analysis of experimental data on the mass of roots of one long flax plant and the studied characteristics of stems, which are given in the literature, it was found that the change in plant height, seed weight per plant, number of plants with flat stems (%) , wood content in a 10-cm segment of the stem at a distance of 10 cm from the cotyledons depending on the proportion of root mass in the total mass of plants, stem curvature depending on the weight of seeds from one plant and stem curvature, wood content in a 10-cm stem segment at a distance of 10–20 and 20–30 cm from the cotyledons, the fiber output from the technical part of the stem, depending on the height of the plants, is described by rectilinear regression equations with positive angular coefficients. Change in the number of plants with flat stems (%) depending on the weight of seeds per plant and plant height, as well as the number of plants with flat stems (%) and wood content in a 10-cm section of stem at a distance of 10 cm from cotyledons depending on from the height of plants is described by the equations of rectilinear regression with negative angular coefficients. The change in the curvature of stems depending on the mass of the roots of one plant and the share of this mass in the total mass of plants is described by the equations of decreasing power functions. The change in the number of plants with a flat stem (%) depending on the root mass of one plant is described by the equation of slow-growing hyperbola. The closest correlation between studies was found between stem curvature and root mass of one plant (negative correlation) with a correlation coefficient of minus 0.706, between stem curvature and the share of root mass in total plant mass (negative correlation) with a correlation coefficient of minus 0.713, between the number of plants with a flat stem (%) and the share of root mass in the total mass of plants and the mass of roots of one plant (in both cases a positive correlation) with correlation coefficients of 0.759 and 0.779, respectively. In the studied relationships, the correlation ratios slightly exceeded the values of the correlation coefficients. A less close positive correlation was found between the wood content in a 10 cm section of the stem at a distance of 10 cm from the cotyledons and the share of root mass in the total mass of plants (correlation coefficient 0.444) and between fiber yield from the technical part of the stem and plant height (correlation coefficient 0.327). A negative correlation with a correlation coefficient of minus 0.336 was found between seed weight per plant and plant height. In these studied relationships, the correlation coefficients slightly exceeded the values of the correlation relations of the performance factors by factorial ones. A positive correlation with a correlation coefficient of 0.114 with a correlation ratio of 0.141 was found between the mass of seeds from one plant and the share of root mass in the total mass of plants. In the rest of the correlations studied, the correlation coefficients ranged from 0.013 to 0.102 and were even smaller. The results of the research can be used in designing the technological process of growing flax, choosing tools for basic tillage and elaboration of technological and operational regulations for the use of mechanization in the preparation and harvesting of Roshen flaxseed.