Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
8 results
Search Results
Item Алгоритм цифрової ідентифікації зернових матеріалів(ЦНТУ, 2024) Степаненко, С. П.; Днесь, В. І.; Борис, А. М.; Кузьмич, А. Я.; Волик, Д. А.; Stepanenko, S.; Dnes, V.; Borys, A.; Kuzmych, A.; Volyk, D.Розглянуто питання застосування технологій машинного зору для підвищення точності та ефективності ідентифікації зернових матеріалів у процесі післязбиральної обробки. Визначено, що традиційні методи контролю якості зерна, зокрема візуальні, мікробіологічні та хімічні тести, мають суттєві обмеження при ідентифікації домішок, особливо тих, що подібні за фізичними та візуальними ознаками. Запропоновано алгоритм цифрової ідентифікації зерна, заснований на методах машинного зору та машинного навчання. The article examines the application of machine vision technologies to enhance the accuracy and efficiency of grain material identification during post-harvest processing. It has been determined that traditional grain quality control methods, including visual, microbiological, and chemical tests, have significant limitations in identifying impurities, especially those similar in physical and visual characteristics. In response to these challenges, a digital grain identification algorithm based on machine vision and machine learning methods is proposed.Item Дослідження фізико-механічних та оптичних характеристик зернових матеріалів(ЦНТУ, 2024) Степаненко, С. П.; Кузьмич, А. Я.; Борис, А. М.; Днесь, В. І.; Волик, Д. А.; Кузьмич, А. А.; Stepanenko, S.; Kuzmych, A.; Borys, A.; Dnes, V.; Volyk, D.; Kuzmych, A.Дослідження виконувалося на основі експериментальних даних щодо основних фізикомеханічних характеристик пшениці та її оболонок. Подано структурно-функціональну схему і опис приладу для визначення оптичних характеристик зернових матеріалів.Встановлено, що зі збільшенням вологості зростають і досліджувані показники: коефіцієнт тертя, кут природного укосу та коефіцієнт внутрішнього тертя. Отримано значення спектральних коефіцієнтів відбиття випромінювання видимого діапазону від зернових матеріалів та коефіцієнтів пропускання випромінювання від висоти шару матеріалу. The purpose of the study is to experimentally study the dependence of the physical and mechanical parameters of wheat grain on the moisture level and optical characteristics: the coefficient of friction on the perforated surface, the angle of natural slope and the coefficient of internal friction, the coefficient of absorption and reflection of light rays from the grain. The study is based on experimental data on the main physical and mechanical characteristics of wheat and its husks. The method of determining the physical and mechanical characteristics of wheat grain is presented, and the conditions of the experiments are described. The work presents a structural and functional scheme and a description of the device for determining the optical characteristics of grain materials.Item Механіко-технологічні передумови зменшення втрат маси коренеплодів в процесі їх збирання(КНТУ, 2015) Адамчук, В. В.; Борис, А. М.; Булгаков, В. М.; Борис, М. М.; Adamchuk, V.; Borys, А.; Bulgakov, V.; Borys, M.Метою досліджень є зменшення втрат цукроносної маси в процесі відділення гички цукрових буряків від головок коренеплодів. В результаті експериментального дослідження розподілення висоти виступання головок коренеплодів над поверхнею ґрунту підтверджена гіпотеза про те, що воно не заперечує закону нормального розподілення. По результатах проведених вимірювань встановлені межі змін його статистичних характеристик, які мають наступні значення: середньостатистичне відхилення σ = 20...30 мм, математичне сподівання m = 40...60 мм. Розроблена лабораторна установка і проведені на ній експериментальні дослідження дали всі основи для розроблення нової системи автоматичного корегування висоти зрізу гички на коренезбиральних машинах сучасного технічного рівня. The experimental results and performance testing process sugar beet conducted in recent years have shown that the beet modern machines that were produced in Europe and America, working with significant losses on sugar mass. These losses are due to generally poor quality cut tops with bits of sugar beet in the bud. Therefore, now is the urgent search for technical solutions that will avoid these losses. The purpose of research is to reduce the losses of sugar supply in the process of separating the tops of the heads of sugar beet roots. As a result of the experimental investigation of the distribution of height protruding heads of root crops above the ground confirmed the hypothesis that it can not deny the law of normal distribution. The results of the measurements set limits changes in its statistical characteristics, which are as follows: average statistical deviation σ = 20 ... 30 mm, the expectation m = 40 ... 60 mm. Designed and conducted laboratory setting her experimental studies have every reason to develop a new system of automatic cor.Item Теорія процесу копіювання головок коренеплодів цукрових буряків новим копірно-роторним відокремлювачем гички(КНТУ, 2013) Калетнік, Г. М.; Булгаков, В. М.; Адамчук, В. В.; Борис, А. М.; Свірень, М. О.; Орищенко, С. Б.; Kaletnik, Grigory; Bulgakov, Vladimir; Adamchuk, Valery; Borys, A.; Sviren, Nikolay; Orischenko, SergeyРозроблено математичну модель вільних коливань при складному русі робочого елемента копірно-роторного відокремлювача гички цукрових буряків. За допомогою даної моделі досліджено процес копіювання головок коренеплодів. В результаті досліджень встановлено можливість використання даного робочого органу на швидкостях поступального руху машини 2…2,5 м/с. New mathematical model of free oscillations of the tool of the rotor device for removal of sugar beet haulm at its slave compound motion is developed. The process of effective slave motion along root crops heads is examined by means of the solution of this model on the computer. As a result the possibility of use of this tool at velocity range 2,0…2,5 m/s of a translational motion of a harvesting machine is defined.Item Теоретичні дослідження втрат цукроносної маси та залишків гички при різних способах її збирання(КНТУ, 2011) Борис, А. М.; Boris, A.Аналітично визначені втрати цукроносної маси при виконанні робочого процесу видалення гички за допомогою комбінованого зрізу при різних агрофізичних характеристиках посіву і технологічних параметрах робочого органу. В результаті теоретичних розрахунків виявлено можливість зменшення діапазону копірного зрізу. It is developed the mathematical model of working process of cutting sugar beets tops with a help of composite cut. It is determined the losses of sugar-bearing mass and the rest of sugar beets tops by the different agrophysical characteristics of crops and technological parameters of working organs. As a result of the theoretical researches is discovered the possibility of the reduction a range of copying cut.Item Механіко-технологічні передумови зменшення втрат маси коренеплодів в процесі їх збирання(КНТУ, 2015) Адамчук, В. В.; Борис, А. М.; Булгаков, В. М.; Борис, М. М.; Adamchuk, Valery; Borys, Аndriy; Bulgakov, Vladimir; Borys, MikolaМетою досліджень є зменшення втрат цукроносної маси в процесі відділення гички цукрових буряків від головок коренеплодів. В результаті експериментального дослідження розподілення висоти виступання головок коренеплодів над поверхнею ґрунту підтверджена гіпотеза про те, що воно не заперечує закону нормального розподілення. По результатах проведених вимірювань встановлені межі змін його статистичних характеристик, які мають наступні значення: середньостатистичне відхилення σ = 20...30 мм, математичне сподівання m = 40...60 мм. Розроблена лабораторна установка і проведені на ній експериментальні дослідження дали всі основи для розроблення нової системи автоматичного корегування висоти зрізу гички на коренезбиральних машинах сучасного технічного рівня. The experimental results and performance testing process sugar beet conducted in recent years have shown that the beet modern machines that were produced in Europe and America, working with significant losses on sugar mass. These losses are due to generally poor quality cut tops with bits of sugar beet in the bud. Therefore, now is the urgent search for technical solutions that will avoid these losses. The purpose of research is to reduce the losses of sugar supply in the process of separating the tops of the heads of sugar beet roots. As a result of the experimental investigation of the distribution of height protruding heads of root crops above the ground confirmed the hypothesis that it can not deny the law of normal distribution. The results of the measurements set limits changes in its statistical characteristics, which are as follows: average statistical deviation = 20 ... 30 mm, the expectation m = 40 ... 60 mm. Designed and conducted laboratory setting her experimental studies have every reason to develop a new system of automatic cor.Item Математична модель динамічної взаємодії робочого елемента відокремлювача гички з головкою коренеплоду(КНТУ, 2012) Булгаков, В. М.; Борис, А. М.; Bulgakov, V.; Borys, A.Розроблено математичну модель взаємодії робочого елемента з головкою коренеплоду цукрових буряків при його складному русі. Отримані аналітичні залежності нормальної реакції, яку створює робочий елемент на коренеплід, від конструкційних параметрів відокремлювача гички та його режимів роботи. За допомогою даної моделі досліджено рух робочого елемента по головці коренеплоду та отримані залежності зміни складових нормальної реакції від часу. Значення складових нормальної реакції були використані у подальшому для силового аналізу вказаної взаємодії. The mathematical model of interaction between the working element of bolt root of sugar beet, with its complex motion. The analytical dependence of the normal reaction that creates a working element to the root, from the structural parameters of separator tops and its modes of operation. With this model the movement of the working element in the head and root dependences change part of the normal reaction times. The value of the normal components of the reaction were used in the future for power analysis indicated interaction.Item Експериментальне дослідження руху мотоблока з садильною машиною на схилах(КНТУ, 2012) Булгаков, В. М.; Борис, А. М.; Василюк, В. І.; Усенко, М. В.; Bulgakov, V.; Boris, A.; Vasiljuk, V.; Usenko, M,Обґрунтовано застосування розсадосадильної машини з механізмом поперечного переміщення садильних секцій. На основі багатофакторного експерименту визначено оптимальні значення факторів, при яких відхилення агрегату від заданого напрямку руху є мінімальним. The employment of seedlings planting machine with the mechanism of transverse displacement of planting sections is substantiated. On the basis of multiple-factor experiment optimum values of factors by which the deflections of the unit of the set direction of movement are minimum are defined.