Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
12 results
Search Results
Item Розробка додатку на смартфон для керування пристроєм для покращення психоемоційного стану людини та дослідження економічної ефективності функціонування розробленого пристрою(ЦНТУ, 2024) Щєпін, В. В.; Трушаков, Д. В.; Сисоліна Н. П.; Федотова, М. О.; Козловський, О. А.; Телюта, Р. В.; Shchiepin, V.; Trushakov, D.; Sysolina, N.; Fedotova, M.; Kozlovskyi, O.; Teliuta, R.Статтю присвячено результатам розробки додатку на смартфон для керування розробленого електронного пристрою, що випромінює різнокольорові світлові ефекти для покращення психоемоційного стану людини. В результаті проведеного аналізу існуючих пристроїв нами було запропоновано та виготовлено діючий макет електронного приладу, що випромінює різнокольорові світлові ефекти, а також вимірює основні параметри навколишнього середовища - температуру, вологість та атмосферний тиск. Цей пристрій також здатний за даними вимірювань температури та вологості навколишнього середовища у приміщенні, керувати пристроями зміни мікроклімату в середині приміщення кондиціонером та зволожувачем повітря. Також розроблено власний додаток на смартфон для дистанційного керування приладом для покращення психоемоційного стану людини. Було проведено дослідження ефективності функціонування розробленого пристрою. Виконано розрахунок економічної ефективності впровадження у виробництво та медзаклади. The article is devoted to the results of the development of a smartphone application for controlling the developed electronic device emitting multi-colored light effects to improve the psycho-emotional state of a person. There are two main approaches to restoring a person's psycho-emotional state: drug therapy and physical therapy. Drug therapy is the main treatment, but it has a number of side effects. However, there is a certain number of people who do not want to take medicines. With the development of physiotherapy methods, it has become possible to reproduce physical factors with the help of various medical devices with hardware used for therapeutic purposes.Item Обґрунтування діагностичних параметрів комплексної системи дистанційного діагностування повітряних ліній на базі БпЛА(ЦНТУ, 2024) Козловський, О. А.; Рендзіняк, С. Й.; Kozlovskyi, O.; Rendzinyak, S.У статті представлено результати обґрунтування діагностичних параметрів для багатопараметрової системи дистанційного моніторингу повітряних ліній, яка базується на використанні безпілотного літального апарату. Більшість дефектів конструктивних елементів повітряних ліній проявляються у вигляді видимих механічних пошкоджень, тоді як їх решта – прихована. Виявлення таких дефектів можливе за допомогою дистанційних методів неруйнівного контролю. Використовуючи теорію інформації визначено, що для діагностування стану повітряної лінії 110 кВ найбільшу інформативність має група з семи параметрів, до складу якої входять візуальні сигнатури дефектів, температури провідників і контактних з’єднань, а також розрядна активність ізоляторів і струмопровідних частин.Запропонований підхід доцільно використовувати при проведенні технікоекономічного обґрунтування вибору обладнання для систем технічного діагностування ліній. The article presents the results of substantiating diagnostic parameters for a multiparametric remote monitoring system of overhead power lines based on the use of an unmanned aerial vehicle (UAV). Significant wear of the structural elements of overhead power lines (OHL) in the IPS of Ukraine, exacerbated by the impact of climate change, leads to an increase in the number of damages. This makes proper maintenance of OHL a priority task. Existing technical diagnostic systems based UAVs are mainly aimed at solving narrow specialized tasks. Therefore, there is a need to develop more universal and comprehensive systems. The analysis of operational defects in the structural elements of OHL has shown that most of these defects manifest as visible mechanical damages, while others remain hidden. Detection of such defects is possible through remote non-destructive testing methods. Based on typical defects, a list of diagnostic parameters for a 110 kV overhead line was formulated. Considering that OHL elements have the same probability of failure, only those defects that may pose a threat to its operability in the near future were considered. Based on the selected defects and diagnostic parameters, a table of possible states of the OHL was compiled. The selection of the necessary and sufficient group of diagnostic parameters was carried out based on their average informativeness, which characterizes the degree of entropy reduction of the overhead line.Item Модернізація та дослідження системи керування процесом ферментації опари(ЦНТУ, 2023) Пархомовський, О. О.; Трушаков, Д. В.; Федотова, М. О.; Козловський, О. А.; Parkhomovskyi, О.; Trushakov, D.; Fedotova, М.; Kozlovskyi, О.Статтю присвячено розробці нового методу визначення готовності ферментованого тіста в герметичному ферментаторі на основі моніторингу витрат газів з герметичного ферментатора. Було проведено детальний аналіз і визначені популярні методи виробництва хліба, зокрема, на основі методу "Біга". Дослідження було зосереджено на процесі ферментації та властивостях цього процесу. A new method for determining the readiness of fermented dough in a sealed fermenter is proposed in the article. A detailed analysis was conducted and popular bread production methods were identified, including the Biga method. The study focused on the fermentation process and its properties.Item Створення багатосекційного фільтру очищення води з автоматизованим контролем забруднення мембран(ЦНТУ, 2022) Матлах, Н. О.; Трушаков, Д. В.; Козловський, О. А.; Федотова, М. О.; Matlakh, N.; Trushakov, D.; Kozlovskyi, О.; Fedotova, M.Статтю присвячено створенню багатосекційного фільтру очищення води, який можливо виготовити власноруч у домашніх умовах. При цьому необхідно у фільтрі необхідно застосувати автоматизований контроль забруднення мембран у секціях фільтру. Основною метою дослідження є розробка простого та дешевого багатосекційного фільтру очищення питної води, який поєднав би у собі різні технології очистки з можливістю власноручного його виготовлення та з можливістю автоматизованого контролю забруднення мембран. Завданням дослідження є розробка та виготовлення діючої моделі багатосекційного фільтру очищення питної води - конструкція фільтру повинна бути багатосекційною, з мембранами, що містять різні наповнювачі для очистки води; простою та дешевою для власноручного виготовлення в домашніх умовах; конструкція фільтру повинна передбачати автоматизований контроль ступеня забруднення мембран у секціях фільтру. Шляхом проведеного аналізу існуючих розповсюджених побутових фільтрів води визначено найбільш оптимальне рішення по розробці власної конструкції побутового фільтру води. В результаті проведеного аналізу було створено діючу модель трьохсекційного фільтру води – перша секція містить мембрану з кварцовим піском, друга секція містить мембрану з порошком активованого вугілля, третя секція містить мембрану з дрібними шматочками шунгіту (або з дрібними шматочками кремнію). В результаті проведеного експериментального дослідження фільтрування забрудненої води з допомогою виготовленого трьохсекційного фільтру було визначено, що вага води після проходження через фільтр зменшується внаслідок затримки речовин зі щільністю більшою ніж у води (тверді домішки). Також відфільтрована вода стала прозорою та перестала пінитись при збовтувані. Це підтверджує працездатність запропонованого фільтру. Розроблений трьохсекційний фільтр може використовуватися як окремий самостійний фільтр води або додатково з побутовими поліпропіленовими фільтрами води для якісного фільтрування домішок до 1мкм. The article is devoted to the creation of a multi-section water purification filter, which can be made by hand at home. At the same time it is necessary to apply in the filter the automated control of pollution of membranes in sections of the filter. The main purpose of the study is to develop a simple and cheap multi-section filter for drinking water purification. The filter must have different cleaning technologies with the possibility of its own manufacture and with the possibility of automated control of membrane contamination. The task of the research is to develop and manufacture a working model of a multi-section filter for drinking water purification. The design of the filter should be multi-section with membranes containing various fillers for water purification; simple and cheap to make at home. The design of the filter should provide for automated control of the degree of contamination of the membranes in the filter sections. By analyzing the existing common household water filters, the most optimal solution for developing your own design of a household water filter has been determined. As a result of the analysis, a working model of a three-section water filter was created. The first section of the filter contains a membrane with quartz sand, the second section contains a membrane with activated carbon powder, the third section contains a membrane with small pieces of shungite (or with small pieces of silicon). As a result of an experimental study of the filtration of contaminated water using a three-section filter was determined next. The weight of water after passing through the filter decreases due to the retention of substances with a density greater than that of water (solid impurities). Also, the filtered water became clear and stopped foaming when shaken. This confirms the efficiency of the proposed filter. The developed three-section filter can be used as a separate stand-alone water filter or in addition with household polypropylene water filters for quality filtration of impurities up to 1 micrometer.Item Створення ІКС «Чиста Україна» для моніторингу забруднення територій(ЦНТУ, 2022) Посторонко, Н. М.; Трушаков, Д. В.; Козловський, О. А.; Федотова, М. О.; Postoronko, N.; Trushakov, D.; Kozlovskyi, О.; Fedotova, M.Статтю присвячено створенню спеціалізованої інформаційно-комунікаційної системи (ІКС), яка б допомогла виявляти забруднення вулиць, факти вандалізму та швидко їх усувати. Основною метою дослідження є автоматизація процесу сповіщення та комунікації установ, що займаються прибиранням території вулиць міст та селищ України. Завданням дослідження є створення макету програмного забезпечення інформаційно-комунікаційної системи – макету веб ресурсу та макету мобільного додатку «Чиста Україна». Це дозволить установам, що займаються прибиранням території в режимі online виявляти забруднення вулиць та факти вандалізму шляхом комунікації з населенням та швидко їх усувати. Шляхом проведеного аналізу існуючих інформаційно-комунікаційних систем визначено найбільш оптимальне рішення - побудовано алгоритм роботи інформаційно-комунікаційної системи “Чиста Україна”. В результаті проведеного дослідження було створено макет веб ресурсу інформаційно-комунікаційної системи та макет мобільного додатку «Чиста Україна», що дозволяють виявляти забруднення вулиць та факти вандалізму шляхом комунікації установ з населенням та швидко їх усувати. Завдяки цьому можна значно скоротити час на виявлення забруднень та збільшити ефективність праці установ, що займаються прибиранням територій у містах та селищах України. The article is devoted to the creation of a specialized information and communication system that would help detect street pollution, vandalism and eliminate them quickly. The main purpose of the study is to automate the process of notification and communication of institutions engaged in cleaning the streets of cities and towns of Ukraine. The task of the research is to create a layout of the software of the information and communication system - the layout of the web resource and the layout of the mobile application "Clean Ukraine". This will allow online clean-up agencies to detect street pollution and vandalism by communicating with the public and removing them quickly. By analyzing the existing information and communication systems, the most optimal solution was determined - the algorithm of the information and communication system "Clean Ukraine" was built. As a result of the study, a layout of the web resource of the information and communication system and a layout of the mobile application "Clean Ukraine" were created, which allows to detect street pollution and vandalism by communicating with the population and quickly eliminate them. An interactive layout of the Clean Ukraine mobile application was created on the Figma platform. The algorithm of this information and communication system is as follows. If the applicant person has discovered street pollution or vandalism, this fact must be recorded in a photo or video. You need to go to the created information and communication mobile application or web resource and fill out the form of notification of pollution or vandalism and attach a photo or video file. Employees of the relevant specialized institution read the message. If the message is meaningful and detailed, the staff of the institution passes it to the service, which cleans the area and eliminates the consequences of pollution. Employees of the specialized institution inform the applicant about the work performed. This can significantly reduce the time to detect contaminants and increase the efficiency of institutions involved in cleaning up the area. Thanks to the introduction of the presented information and communication system, it will be possible to improve the quality of cleaning the streets of cities and towns of Ukraine. Also, this system will create new jobs for which people do not need special education. Many of this work will be filled by people who will work remotely checking user requests.Item Математична модель прогнозування ожеледоутворення на проводах повітряних ліній елетропередачі(КНТУ, 2016) Козловський, О. А.; Орлович, А. Ю.; Kozlovskyi, Oleksandr; Orlovich, AnatolijРозроблено адаптивну модель прогнозування на основі ковзної лінійної регресії, що дозволяє визначати час утворення ожеледно-паморозевих відкладень на проводах повітряних ліній. Для оцінки надійності прогнозів отримано аналітичне рівняння фідуціальних меж. Виконано порівняльний аналіз результатів прогнозування отриманих за методами ковзної лінійної та лінійної регресії. Запропонована прогностична модель має достатню точність та надійність для розробки на її основі прогнозуючої системи технічного діагностування ожеледоутворення на проводах повітряних ліній електропередачі. The purpose of research is to develop a mathematical model of time predicting icing on wires overhead lines based on the analysis of discrete time series. Developed adaptive forecasting model based on a rolling linear regression, allow appointing the time of ice and hoarfrost sediments formation on the transmission line wires in the changing data structures environment. For checking in assessing the reliability were founded the analytical equations of fiduсial limits. As a result of benchmarking the average absolute error and mean absolute error in percentage found that forecasts based on a rolling linear regression with error in ≈ 2 times lower than on the basis of linear regression. The proposed predictive model has sufficient accuracy and reliability for mathematically reasonable development on the basis of ice and hoarfrost sediments on wires overhead transmission lines technical predictive test system.Item До питання визначення опору ожеледно-паморозевих відкладень(КНТУ, 2012) Грищук, І. С.; Кубкін, М. В.; Козловський, О. А.; Gryshchuk, І.; Kubkin, М.; Kozlovskyi, О.Запропоновано спосіб вимірювання електричного опору ожеледно-паморозевих відкладень за допомогою двоканального осцилографа, що базується на методі використання закону Ома для змінного струму. Приведені вирази для розрахунку значень опору та ємності дослідного зразка, а також метрологічні оцінки розробленого способу вимірювання. The article offers the method of measuring electrical resistance of glaze-ice and rime deposition with the help of dual channel oscilloscope. It is based on the method of usage of Ohm’s law for alternating current. The article provides expressions for the calculation of resistance value as well as meteorological evaluation of the developed method of measuring.Item Експериментальні дослідження нестаціонарних теплових режимів неізольованих проводів повітряних ліній перед процесом обледеніння(КНТУ, 2014) Козловський, О. А.; Орлович, А. Ю.; Клименко, В. В.; Kozlovskyi, Oleksandr; Orlovych, Аnatolij; Klymenko, VasylijДля визначення діапазонів уставок системи технічної діагностики проводів при обледенінні проведені лабораторні дослідження. Описані умови і методи експериментальних досліджень, лабораторне обладнання та конструкція досліджуваних зразків проводу. Діапазон потужності охолодження зразка неізольованого проводу АС- 50/8, необхідної для утворення на ньому штучних ожеледно-паморозевих відкладень, при найбільш ймовірних метеорологічних умовах для його природнього обледеніння склав 0,25-0,17 Вт/см. Отримані експериментальні дані дозволять підвищити точність роботи систем технічної діагностики проводів в умовах обледеніння. In the article were conducted laboratory studies to determine the ranges of technical diagnostics settings of wires at icing process. We described the conditions and methods of experimental research, laboratory equipment and design of wire samples. Cooling process power range of the sample non isolated wire AC- 50/ 8, required for the formation of the artificial ice and frost deposits at the most likely weather conditions for its natural icing was 0,25-0,17 W / cm. The experimental data will improve the accuracy of technical diagnostics wires in icing conditions.Item Розробка та комп’ютерне моделювання режимів роботи первинного вимірювального перетворювача ожеледоутворення(КНТУ, 2011) Козловський, О. А.; Кубкін, М. В.; Грищук, І. С.; Kozlovskyi, O.; Kubkin, M.; Gryshchuk, I.Запропоновано нову конструкцію первинного вимірювального перетворювача для визначення початку утворення ожеледно-паморозевих відкладень та ідентифікації їх типу на проводах повітряних ліній електропередачі. Розроблено методику визначення електричного опору ожеледно-паморозевих відкладень на первинних вимірювальних перетворювачах складної геометрії. На основі чисельного дослідження доведено можливість ідентифікації типу відкладення на первинному вимірювальному перетворювачі. A new design of a sensor for ice accreation detection and identification of the type of ice accreation on the overhead transmission lines has been offered. The assessment method for testing electrical resistance of ice accreation on the sensors of complicated space structure has been worked out. On the basis of a numerical research the possibility of the identification of the type of accreation on the sensors has been proved.Item Автоматизована система технічної діагностики проводів повітряних ліній електропередачі 6-10 кВ(КНТУ, 2012) Козловський, О. А.; Сіріков, О. І.; Kozlovskyi, О.; Sirikov, О.Запропоновано автоматизовану систему технічної діагностики повітряних ліній електропередачі розподільчих мереж 6-10 кВ з підвищеною точністю прогнозування ожеледоутворення. Розроблена система дозволяє на основі зробленого прогнозу завчасно збирати схеми для плавки ожеледі, а отже своєчасно проводити захисні заходи, з мінімальними витратами електроенергії. The article introduces an automated system for technical diagnostics of overhead power transmission lines of 6-10 kV distribution network with particularly accurate icing forecast. Based on the above mentioned forecast the developed system allows collecting de-icing schemes in advance and taking timely protective measures with minimum energy loss.