Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
2 results
Search Results
Item Порівняльні показники роботи сошників двох типів(ЦНТУ, 2024) Сало, В. М.; Лещенко, С. М.; Вовнянко, Б. Г.; Мороз, С. М.; Salo, V.; Leshchenko, S.; Vovnianko, B.; Moroz, S.В статті розглянуті особливості забезпечення якісних показників виконання технологічного процесу сівби сільськогосподарських культур з використанням сошників різних типів. Представлена методика проведення польових порівняльних випробувань сошників з гострим кутом входження в ґрунт, які представлені експериментальною посівною секцією та серійним дводисковим сошником з прикочуючим котком. До складу секції входить сошник з гострим кутом входження в ґрунт, обладнаний утримуючою п’яткою. The article considers specific features of ensuring quality indicators of the technological process of sowing crops using coulters of various types. The existing designs of coulters are analysed, indicating their advantages and disadvantages. It is emphasised that the use of disc coulters for direct sowing is limited due to the need to apply significant efforts to deepen them into the soil. A well-known alternative design of operating parts for seed placement into the soil is a coulter with a sharp angle of entry, but its design and parameters need further improvement.The paper proposes the design of a sowing section for sowing spiked grain crops on the soil after no till tillage methods with the presence of plant residues in the upper soil layers. The basis of this sowing section is a coulter with a sharp angle of entry into the soil, the design of which provides the use of a holding heel.Item Обґрунтування поперечного перерізу стеблевідвода сошника для прямої сівби зернових культур(КНТУ, 2015) Лузан, П. Г.; Сало, В. М.; Лузан, О. Р.; Павленко, І. І.; Luzan, Petro; Salo, Vasil; Luzan, Olena; Pavlenko, IvanЗ метою обґрунтування поперечного перерізу стеблевідвода сошника для прямої сівби зернових культур проаналізовано можливі варіанти його встановлення над поверхнею ґрунту. Встановлено, що горизонтальний рух рослинних решток по стеблевідводу забезпечується при виконанні умови, коли активна сила, що діє на них, буде більше суми сил їх опору тертя по металу і ґрунту та сил, які протидіють зміні їх форми. Проведено теоретичні дослідження і розроблено методику для визначення раціональних параметрів поперечного перерізу стеблевідвода. The purpose of this research is a development of method for substantiation of rational parameters for a coulter's divider fender cross-section for direct seeding of white crops. With the purpose of divider fender’s cross-section substantiation, possible variants of over the soil surface setup were analyzed. Along with theoretical researches, the method of rational parameters determination for divider fender’s cross-section was developed. Was defined the impact of plant matter active forces, resisting forces of dragging over divider fender’s surface and soil, and deformation resisting forces. Horizontal movement of plant matter in divider fender could be achieved upon condition when the active force exceeds the sum of resistance forces. Mentioned researches help to define the necessary parameters of coulter's divider fender cross-section for straw crops seeding depending on plant matter length.